Date: Mon, 18 Jun 2001 12:17:31 -0400 (EDT) From: Joe Clarke <marcus@marcuscom.com> To: <dochawk@psu.edu> Cc: Andrey Simonenko <simon@comsys.ntu-kpi.kiev.ua>, Jonathan Lemon <jlemon@flugsvamp.com>, <freebsd-questions@FreeBSD.ORG> Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? Message-ID: <20010618121536.K50737-100000@shumai.marcuscom.com> In-Reply-To: <200106181544.f5IFiOw05323@fac13.ds.psu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
I have: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xf4000000-0xf40fffff,0xf4201000-0xf4201fff irq 10 at device 14.0 on pci0 fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1440-0x147f mem 0xf4100000-0xf41fffff,0xf4202000-0xf4202fff irq 15 at device 15.0 on pci0 working in 4.3-RELEASE at 100/full connected to Cisco Catalyst switches, but I have not tried -stable. I kept reading reports about timeouts in -stable. I think they've all be resolved now. Joe Clarke On Mon, 18 Jun 2001 dochawk@psu.edu wrote: > Andrey added, > > > I checked some messages in freebsd-stable mailing list (especially > > thread "Any patch for fxp driver?") and understood that I should tell more > > about my system: > > > * Two Intel Ether Express 10/100 cards > > * 10Mbit Lan with 10Mbit 16 ports Compex hub > > > > Is there any chance to get fxp driver with my NICs to work properly? > > If there isn't, you can't read this :) > > you might try pulling one card first; I've never tried using two. > > You also need the fxp option in the kernel. > > hawk > > > -- > Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign > dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail > These opinions will not be those of X and postings > Penn State until it pays my retainer. / \ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010618121536.K50737-100000>