Date: Fri, 28 Jan 2000 08:51:03 +0200 (SAST) From: conradj@is.co.za To: FreeBSD-gnats-submit@freebsd.org Subject: kern/16416: Hang on boot with SMP Dell 2400 Message-ID: <20000128065103.596B1328@tom-jones.is.co.za>
next in thread | raw e-mail | index | archive | help
>Number: 16416
>Category: kern
>Synopsis: Hang on boot with SMP Dell 2400
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jan 27 23:00:01 PST 2000
>Closed-Date:
>Last-Modified:
>Originator: Conrad Juleff
>Release: FreeBSD 3.1-19990505-STABLE i386
>Organization:
The Internet Solution
>Environment:
Out the box Dell 2400 with 2 x PIII 500MHz
>Description:
Trying to boot an SMP kernel hangs half way. Tweaking the SMP settings
in the kernel has no effect. I believe the problem is due to the
unsupported Reliance chipset. I have tried 3.3-STABLE, 3.4-RELEASE and
4-20000127. The output of a non-SMP dmesg is below, note the pci not
being picked up correctly.
>How-To-Repeat:
Compile an SMP kernel direct from GENERIC with NAPIC=2(gives an error
otherwise saying set this to 2 from the default of 1).
>Fix:
Dont use SMP and use a single processor only.
dmesg output:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-19990505-STABLE #0: Wed May 5 10:30:45 GMT 1999
root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 498342443 Hz
CPU: Pentium III (498.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping=3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>,<b25>>
real memory = 67100672 (65528K bytes)
avail memory = 61829120 (60380K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xc0347000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1166 device=0009)> rev 0x05 on pci0.0.0
chip1: <Host to PCI bridge (vendor=1166 device=0009)> rev 0x05 on pci0.0.1
chip2: <PCI to PCI bridge (vendor=8086 device=0962)> rev 0x01 on pci0.2.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x08 int a irq 11 on pci0.8.0
fxp0: Ethernet address 00:c0:4f:01:1f:60
vga0: <ATI model 4759 graphics accelerator> rev 0x7a on pci0.14.0
chip3: <PCI to ISA bridge (vendor=1166 device=0200)> rev 0x4f on pci0.15.0
Probing for devices on PCI bus 1:
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x01 int a irq 14 on pci1.4.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> rev 0x01 int a irq 7 on pci1.6.0
ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 not found
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt_isa_probe: Probe failled for card at 0x330
bt_isa_probe: Probe failled for card at 0x334
bt_isa_probe: Probe failled for card at 0x230
bt_isa_probe: Probe failled for card at 0x234
bt_isa_probe: Probe failled for card at 0x130
bt_isa_probe: Probe failled for card at 0x134
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
pass3 at ahc0 bus 0 target 6 lun 0
pass3: <DELL 1x6 U2W SCSI BP 5.33> Fixed Processor SCSI-2 device
pass3: 3.300MB/s transfers
changing root device to da0s1a
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-318350Y SA60> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17366MB (35566501 512 byte sectors: 255H 63S/T 2213C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DNES-318350Y SA60> Fixed Direct Access SCSI-3 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 17366MB (35566501 512 byte sectors: 255H 63S/T 2213C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DNES-318350Y SA60> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 17366MB (35566501 512 byte sectors: 255H 63S/T 2213C)
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000128065103.596B1328>