Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Sep 95 15:16:00 PDT
From:      "Ugen J.S.Antsilevich" <ugen@latte.worldbank.org>
To:        freebsd-questions@FreeBSD.org
Subject:   DOS partitition can't be seen...
Message-ID:  <Chameleon.4.00.4.950914151739.ugen@ugen>

Next in thread | Raw E-Mail | Index | Archive | Help
Hi...

Below is the output of fdisk when i run it on
my brand-new-out-of CDROM 2.0.5 system..Same happaned
on -current as long as i was able to run it - the 1st partittion 
which supposed to be the dos one is not in the list. I can't see
or mount it...Any suggestions on what to do????
Thanx
-------------------

******* Working on device /dev/rwd0d ******* 
parameters extracted from in-core disklabel are: 
cylinders=412 heads=64 sectors/track=63 (4032 blks/cyl) 

parameters to be used for BIOS calculations are: 
cylinders=412 heads=64 sectors/track=63 (4032 blks/cyl) 

fdisk: Invalid fdisk partition table found 
Warning: BIOS sector numbering starts with sector 1 
Information from DOS bootblock is: 
The data for partition 0 is: 
<UNUSED> 
The data for partition 1 is: 
<UNUSED> 
The data for partition 2 is: 
<UNUSED> 
The data for partition 3 is: 
sysid 165,(FreeBSD/NetBSD/386BSD) 
    start 1, size 1661183 (811 Meg), flag 80 
        beg: cyl 0/ sector 2/ head 0; 
        end: cyl 412/ sector 1/ head 0 
--Ugen




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?Chameleon.4.00.4.950914151739.ugen>