Date: Mon, 08 Oct 2018 10:27:17 +0200 From: Petr Fischer <petr.fischer@me.com> To: freebsd-acpi@freebsd.org Subject: Re: suspend to RAM stopped working on 11.2 (11.1 was OK) Message-ID: <20181008082717.zsjaabxonppwz5nz@pf-bsd> In-Reply-To: <20180928120451.lkxyeervyo3wxyqb@pf-bsd> References: <20180927175917.7iea6w4ckyngrpto@pf-bsd> <CAJ-VmokA%2BYB3TEJ7AXSNF_%2BQL%2BA-3uBbo3ZA_fJvu2Hq5BhVvA@mail.gmail.com> <20180928120451.lkxyeervyo3wxyqb@pf-bsd>
next in thread | previous in thread | raw e-mail | index | archive | help
Should I enter a bug? pf > I am very sorry, but I forgot to describe the exact behavior: > > When I call "acpiconf -s 3", the system is put to sleep, the fan stops spinning, the LEDs on the laptop show the correct sleep state - but after cca 1 second, the system itself wakes up. > Graphics are OK after "auto wake", everything works. > > The problem is automatic resume right after suspend. > > pf > > > are you in console or xorg? > > > > if in console try changing virtual consoles (alt-f2, alt-f1, etc) > > > > > > -a > > > > > > On Thu, 27 Sep 2018 at 10:59, Petr Fischer via freebsd-acpi < > > freebsd-acpi@freebsd.org> wrote: > > > > > Hello, suspend to RAM stopped working on my laptop on 11.2 (11.1 was OK) > > > > > > freebsd: 11.2-RELEASE-p3 > > > hardware: Toshiba Portege Z30 - Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz > > > > > > tried with i915kms from FreeBSD base (default) and also with > > > drm-next-kmod-4.11.g20180822 > > > (drm-stable-kmod-g20180822 freezes graphics 1 second after load) > > > > > > tried with hw.acpi.reset_video=0 and also with hw.acpi.reset_video=1 > > > > > > Is there someone who can help me with debug this problem? > > > I can compile something and test when you say. > > > > > > Thanks very much! Petr Fischer > > > > > > > > > /var/log/messages after acpiconf -s 3 command: > > > --------------------- > > > Sep 27 19:49:40 pf-bsd acpi: suspend at 20180927 19:49:40 > > > Sep 27 19:49:54 pf-bsd kernel: Power well on > > > Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested > > > pci_set_powerstate > > > Sep 27 19:49:54 pf-bsd kernel: pci0: failed to set ACPI power state D3 on > > > \_SB_.PCI0.GFX0: AE_BAD_PARAMETER > > > Sep 27 19:49:54 pf-bsd kernel: hdac0: Command timeout on address 0 > > > Sep 27 19:49:54 pf-bsd kernel: uhub0: at usbus0, port 1, addr 1 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: ugen0.2: <vendor 0x0458 product 0x0154> at > > > usbus0 (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: ums0: at uhub0, port 5, addr 1 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: ums0: detached > > > Sep 27 19:49:54 pf-bsd kernel: uhid0: at uhub0, port 5, addr 1 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: uhid0: detached > > > Sep 27 19:49:54 pf-bsd kernel: ugen0.3: <vendor 0x05e3 USB2.0 Hub> at > > > usbus0 (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: uhub3: at uhub0, port 6, addr 2 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: ugen0.4: <vendor 0x0b97 product 0x7761> at > > > usbus0 (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: uhub4: at uhub3, port 3, addr 3 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: ugen0.5: <O2 O2Micro CCID SC Reader> at > > > usbus0 (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: uhub4: detached > > > Sep 27 19:49:54 pf-bsd kernel: uhub3: detached > > > Sep 27 19:49:54 pf-bsd kernel: wlan0: link state changed to DOWN > > > Sep 27 19:49:54 pf-bsd kernel: uhub1: at usbus1, port 1, addr 1 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: ugen1.2: <vendor 0x8087 product 0x8000> at > > > usbus1 (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: uhub2: at uhub1, port 1, addr 2 > > > (disconnected) > > > Sep 27 19:49:54 pf-bsd kernel: uhub2: detached > > > Sep 27 19:49:54 pf-bsd kernel: pcib0: failed to set ACPI power state D2 on > > > \_SB_.PCI0: AE_BAD_PARAMETER > > > Sep 27 19:49:54 pf-bsd kernel: acpi0: cleared fixed power button status > > > Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested > > > pci_set_powerstate > > > Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested pci_enable_io > > > Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested pci_enable_io > > > Sep 27 19:49:54 pf-bsd kernel: hdac0: Device stuck in reset > > > Sep 27 19:49:54 pf-bsd kernel: hdac0: Command timeout on address 0 > > > Sep 27 19:49:54 pf-bsd last message repeated 21 times > > > Sep 27 19:49:54 pf-bsd kernel: xhci0: Port routing mask set to 0xffffffff > > > Sep 27 19:49:54 pf-bsd kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, > > > rev 3.00/1.00, addr 1> on usbus0 > > > Sep 27 19:49:54 pf-bsd kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev > > > 2.00/1.00, addr 1> on usbus1 > > > Sep 27 19:49:54 pf-bsd wpa_supplicant[58136]: wlan0: > > > CTRL-EVENT-DISCONNECTED bssid=f0:79:59:d2:7a:00 reason=0 > > > Sep 27 19:49:54 pf-bsd wpa_supplicant[58136]: ioctl[SIOCS80211, op=20, > > > val=0, arg_len=7]: Can't assign requested address > > > Sep 27 19:49:54 pf-bsd acpi: resumed at 20180927 19:49:54 > > > Sep 27 19:49:55 pf-bsd kernel: uhub0: 13 ports with 13 removable, self > > > powered > > > Sep 27 19:49:55 pf-bsd kernel: uhub1: 2 ports with 2 removable, self > > > powered > > > Sep 27 19:49:56 pf-bsd kernel: ugen0.2: <vendor 0x0458 product 0x0154> at > > > usbus0 > > > Sep 27 19:49:56 pf-bsd kernel: ums0 on uhub0 > > > Sep 27 19:49:56 pf-bsd kernel: ums0: <vendor 0x0458 product 0x0154, class > > > 0/0, rev 1.10/33.52, addr 1> on usbus0 > > > Sep 27 19:49:56 pf-bsd kernel: ums0: 5 buttons and [XYZT] coordinates ID=1 > > > Sep 27 19:49:56 pf-bsd kernel: uhid0 on uhub0 > > > Sep 27 19:49:56 pf-bsd kernel: uhid0: <vendor 0x0458 product 0x0154, class > > > 0/0, rev 1.10/33.52, addr 1> on usbus0 > > > Sep 27 19:49:56 pf-bsd kernel: ugen1.2: <vendor 0x8087 product 0x8000> at > > > usbus1 > > > Sep 27 19:49:56 pf-bsd kernel: uhub2 on uhub1 > > > Sep 27 19:49:56 pf-bsd kernel: uhub2: <vendor 0x8087 product 0x8000, class > > > 9/0, rev 2.00/0.04, addr 2> on usbus1 > > > Sep 27 19:49:56 pf-bsd kernel: ugen0.3: <vendor 0x05e3 USB2.0 Hub> at > > > usbus0 > > > Sep 27 19:49:56 pf-bsd kernel: uhub3 on uhub0 > > > Sep 27 19:49:56 pf-bsd kernel: uhub3: <vendor 0x05e3 USB2.0 Hub, class > > > 9/0, rev 2.00/85.37, addr 2> on usbus0 > > > Sep 27 19:49:56 pf-bsd kernel: uhub2: 8 ports with 8 removable, self > > > powered > > > Sep 27 19:49:57 pf-bsd kernel: uhub3: 3 ports with 0 removable, self > > > powered > > > Sep 27 19:49:57 pf-bsd kernel: ugen0.4: <vendor 0x0b97 product 0x7761> at > > > usbus0 > > > Sep 27 19:49:58 pf-bsd kernel: uhub4 on uhub3 > > > Sep 27 19:49:58 pf-bsd kernel: uhub4: <vendor 0x0b97 product 0x7761, class > > > 9/0, rev 1.10/1.10, addr 3> on usbus0 > > > Sep 27 19:49:58 pf-bsd kernel: uhub4: 4 ports with 3 removable, self > > > powered > > > Sep 27 19:49:59 pf-bsd kernel: ugen0.5: <O2 O2Micro CCID SC Reader> at > > > usbus0 > > > Sep 27 19:49:59 pf-bsd root: Unknown USB device: vendor 0x0b97 product > > > 0x7772 bus uhub4 > > > Sep 27 19:50:02 pf-bsd wpa_supplicant[58136]: wlan0: Trying to associate > > > with f0:79:59:d2:7a:00 (SSID='pf's Network' freq=2427 MHz) > > > Sep 27 19:50:02 pf-bsd wpa_supplicant[58136]: wlan0: Associated with > > > f0:79:59:d2:7a:00 > > > Sep 27 19:50:02 pf-bsd kernel: wlan0: link state changed to UP > > > _______________________________________________ > > > freebsd-acpi@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-acpi > > > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" > > > > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20181008082717.zsjaabxonppwz5nz>