Date: Fri, 17 Jun 2016 16:06:44 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Milan Obuch <freebsd-arm@dino.sk> Cc: Emmanuel Vadot <manu@bidouilliste.com>, freeBSD-arm@freebsd.org Subject: Re: any progress with OrangePi Plus / AllWinner H3 ? Message-ID: <0F8AAA97-99E7-4378-B6AB-F81EF45EAAC5@cs.huji.ac.il> In-Reply-To: <20160617114018.0e70ad81@zeta.dino.sk> References: <0A7A3F1D-2853-4DA4-A8A1-52C38A6ED093@cs.huji.ac.il> <20160617090156.83824237d9b1ae564bb92088@bidouilliste.com> <487C9542-1397-4CB7-837C-CD724656A0F1@cs.huji.ac.il> <20160617114018.0e70ad81@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 17 Jun 2016, at 12:40 PM, Milan Obuch <freebsd-arm@dino.sk> wrote: >=20 > On Fri, 17 Jun 2016 10:12:08 +0300 > Daniel Braniss <danny@cs.huji.ac.il> wrote: >=20 >>> On 17 Jun 2016, at 10:01, Emmanuel Vadot <manu@bidouilliste.com> >>> wrote: >>>=20 >>> On Fri, 17 Jun 2016 09:45:28 +0300 >>> Daniel Braniss <danny@cs.huji.ac.il> wrote: >>>=20 >>>> Hi, >>>> I still have no luck booting it. >>>>=20 >>>> It hangs while trying to access the a10_mmc0: =20 >>>=20 >>> Hello, >>>=20 >>> Update to rev 301890 (or wait ALPHA4 builds) and everything should >>> be fine. >>>=20 >>> Cheers, =20 >>=20 >> ok, last update got rev 301975, so i=E2=80=99m compiling now, >>=20 >> thanks, >> danny >>=20 >>>=20 >>> --=20 >>> Emmanuel Vadot <manu@bidouilliste.com> =20 >>=20 >=20 > Hi, >=20 > my sources are at svn revision 301989 and no joy on my Orange Pi One: >=20 > lo0: bpf attached > a10_mmc0: timeout updating clock > a10_mmc0: timeout updating clock > mmc0: Probing bus > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: controller timeout > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: error rint: 0x00000100 > a10_mmc0: error rint: 0x00000100 > a10_mmc0: error rint: 0x00000100 > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: error rint: 0x00000100 > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: timeout updating clock > mmc0: SD probe: failed > a10_mmc0: controller timeout > a10_mmc0: error rint: 0x00000100 > a10_mmc0: timeout updating clock > a10_mmc0: controller timeout > a10_mmc0: error rint: 0x00000100 > mmc0: MMC probe: failed > mmc0: Current OCR: 0x00000000 > mmc0: No compatible cards found on bus > a10_mmc0: timeout updating clock > Release APs >=20 > Kernel is built using ALLWINNER configuration, I just commented out >=20 > makeoptions WITH_CTF=3D1 >=20 > in sys/arm/conf/std.armv6 (last line). >=20 > Milan same here. danny
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0F8AAA97-99E7-4378-B6AB-F81EF45EAAC5>