Date: Sat, 23 Dec 2006 23:26:12 +0300 From: "Abdullah Al-Marrie" <almarrie@gmail.com> To: freebsd-multimedia@freebsd.org Subject: Latest snd Patchset for i386 RELENG_6 didn't work with Acer Aspire 5102 WLMi Message-ID: <499c70c0612231226v43aa86ew23ef31647fa7dde5@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello Ariff, I tried your latest snd Patchset my laptop but it didn't work. :( # uname -a FreeBSD 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: Sat Dec 23 22:06:33 AST 2006 arabian@:/usr/obj/usr/src/sys/ARABIAN i386 # pciconf -lv | grep -B 4 audio # dmesg | grep ^pcm , or grep ^pcm /var/run/dmesg.boot grep: ,: No such file or directory grep: or: No such file or directory grep: grep: No such file or directory grep: ^pcm: No such file or directory # sysctl hw.snd.verbose=2 ; cat /dev/sndstat sysctl: unknown oid 'hw.snd.verbose' cat: /dev/sndstat: No such file or directory # sysctl hw.snd sysctl: unknown oid 'hw.snd' none2@pci0:20:2: class=0x040300 card=0x009f1025 chip=0x437b1002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' class = multimedia # sysctl hw hw.machine: i386 hw.model: AMD Turion(tm) 64 X2 Mobile Technology TL-50 hw.ncpu: 2 hw.byteorder: 1234 hw.physmem: 1465925632 hw.usermem: 1364754432 hw.pagesize: 4096 hw.floatingpoint: 1 hw.machine_arch: i386 hw.realmem: 1474887680 hw.ata.ata_dma: 1 hw.ata.atapi_dma: 1 hw.ata.wc: 1 hw.cardbus.debug: 0 hw.cardbus.cis_debug: 0 hw.cs.debug: 0 hw.cs.ignore_checksum_failure: 0 hw.cs.recv_delay: 570 hw.firewire.try_bmr: 1 hw.firewire.hold_count: 3 hw.firewire.fwmem.eui64_hi: 0 hw.firewire.fwmem.eui64_lo: 0 hw.firewire.fwmem.speed: 2 hw.firewire.fwe.stream_ch: 1 hw.firewire.fwe.tx_speed: 2 hw.firewire.fwe.rx_queue_len: 128 hw.firewire.sbp.auto_login: 1 hw.firewire.sbp.max_speed: -1 hw.firewire.sbp.exclusive_login: 1 hw.firewire.sbp.login_delay: 1000 hw.firewire.sbp.scan_delay: 500 hw.firewire.sbp.use_doorbell: 0 hw.firewire.sbp.tags: 0 hw.pccard.debug: 0 hw.pccard.cis_debug: 0 hw.cbb.start_memory: 2281701376 hw.cbb.start_16_io: 256 hw.cbb.start_32_io: 4096 hw.cbb.debug: 0 hw.pcic.intr_mask: 57016 hw.pci.enable_io_modes: 1 hw.pci.do_power_nodriver: 0 hw.pci.do_power_resume: 1 hw.pci.host_mem_start: 2147483648 hw.pci.irq_override_mask: 57080 hw.intr_storm_threshold: 500 hw.availpages: 357892 hw.bus.devctl_disable: 0 hw.psm.tap_threshold: 25 hw.psm.tap_timeout: 125000 hw.kbd.keymap_restrict_change: 0 hw.syscons.saver.keybonly: 1 hw.syscons.bell: 1 hw.syscons.kbd_reboot: 1 hw.syscons.kbd_debug: 1 hw.syscons.sc_no_suspend_vtswitch: 0 hw.busdma.total_bpages: 545 hw.busdma.zone0.total_bpages: 512 hw.busdma.zone0.free_bpages: 512 hw.busdma.zone0.reserved_bpages: 0 hw.busdma.zone0.active_bpages: 0 hw.busdma.zone0.total_bounced: 0 hw.busdma.zone0.total_deferred: 0 hw.busdma.zone0.lowaddr: 0xffffffff hw.busdma.zone0.alignment: 256 hw.busdma.zone0.boundary: 0 hw.busdma.zone1.total_bpages: 32 hw.busdma.zone1.free_bpages: 32 hw.busdma.zone1.reserved_bpages: 0 hw.busdma.zone1.active_bpages: 0 hw.busdma.zone1.total_bounced: 0 hw.busdma.zone1.total_deferred: 0 hw.busdma.zone1.lowaddr: 0xffffffff hw.busdma.zone1.alignment: 2 hw.busdma.zone1.boundary: 65536 hw.busdma.zone2.total_bpages: 1 hw.busdma.zone2.free_bpages: 1 hw.busdma.zone2.reserved_bpages: 0 hw.busdma.zone2.active_bpages: 0 hw.busdma.zone2.total_bounced: 0 hw.busdma.zone2.total_deferred: 0 hw.busdma.zone2.lowaddr: 0x3e7fffff hw.busdma.zone2.alignment: 64 hw.busdma.zone2.boundary: 0 hw.clockrate: 1596 hw.instruction_sse: 1 hw.via_feature_rng: 0 hw.via_feature_xcrypt: 0 hw.apic.enable_extint: 0 hw.ndis_filepath: /compat/ndis hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 1 hw.acpi.cpu.cx_supported: C1/0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 45.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 78.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 95.0C hw.acpi.thermal.tz0._ACx: 50.0C -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 dmesg -v output: # dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #1: Sat Dec 23 22:06:33 AST 2006 arabian@:/usr/obj/usr/src/sys/ARABIAN Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a92000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a921c4. Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc0a92270. Preloaded elf module "/boot/modules/bcmwl5_sys.ko" at 0xc0a9231c. Preloaded elf module "/boot/kernel/ndis.ko" at 0xc0a923cc. Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc0a92478. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a92524. Calibrating clock(s) ... i8254 clock: 1193222 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1596015284 Hz CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.02-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> HTT bit cleared - FreeBSD does not have licensing issues requiring it. Cores per package: 2 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1474887680 (1406 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000005658afff, 1435906048 bytes (350563 pages) avail memory = 1435627520 (1369 MB) MP Configuration Table version 1.4 found at 0xc009e171 Table 'FACP' at 0x57e99c04 Table 'SLIC' at 0x57e99c78 Table 'SSDT' at 0x57e99dee Table 'APIC' at 0x57e99f70 MADT: Found table at 0x57e99f70 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) INTR: Adding local APIC 0 as a target ACPI APIC Table: <PTLTD APIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f80c0 bios32: Entry = 0xfd954 (c00fd954) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd950+0x0 pnpbios: Found PnP BIOS data at 0xc00f8120 pnpbios: Entry = e4cf:a1e8 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ACPI: Overriding _OS definition with "Windows 2006" MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 01 00 01 1e 01 00 01 34 01 00 01 39 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 60 mode(s) found VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc08a2e42 (1000022) VESA: ATI RADEON XPRESS 200M Series VESA: ATI Technologies Inc. MS48 01.00 null: <null device, zero device> npx0: INT 16 interface acpi0: <ACRSYS RSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=59501002) pcibios: BIOS_PRESENT call failed AcpiOsDerivePciId: bus 0 dev 18 func 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 AcpiOsDerivePciId: bus 0 dev 20 func 1 AcpiOsDerivePciId: bus 0 dev 20 func 3 AcpiOsDerivePciId: bus 6 dev 2 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd93ea000 pa 0x9c000 AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 Validation 0 255 N 0 3 4 5 7 After Disable 0 255 N 0 3 4 5 7 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1002, dev=0x5950, revid=0x10 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x5a3f, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x5a36, revid=0x00 bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x5a37, revid=0x00 bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x4374, revid=0x80 bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 MSI supports 1 message map[10]: type 1, range 32, base c0004000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4375, revid=0x80 bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 MSI supports 1 message map[10]: type 1, range 32, base c0005000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4373, revid=0x80 bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base c0006000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4372, revid=0x83 bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00008400, size 4, enabled map[14]: type 1, range 32, base fed00000, size 10, enabled found-> vendor=0x1002, dev=0x4376, revid=0x80 bus=0, slot=20, func=1 class=01-01-82, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 MSI supports 1 message map[20]: type 4, range 32, base 00008410, size 4, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x437b, revid=0x01 bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base c0000000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4377, revid=0x80 bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4371, revid=0x80 bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xc8000000-0xcfffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5975, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base c8000000, size 27, enabled pcib1: requested memory range 0xc8000000-0xcfffffff: good map[14]: type 4, range 32, base 00009000, size 8, enabled pcib1: requested I/O range 0x9000-0x90ff: in range map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: requested memory range 0xc0100000-0xc010ffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 17 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0x0-0x0 pcib2: prefetched decode 0x0-0x0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pcib3: secondary bus 4 pcib3: subordinate bus 5 pcib3: I/O decode 0x0-0x0 pcib3: memory decode 0x0-0x0 pcib3: prefetched decode 0x0-0x0 pci4: <ACPI PCI bus> on pcib3 pci4: physical bus=4 ohci0: <ATI SB400 USB Controller> mem 0xc0004000-0xc0004fff irq 19 at device 19.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0004000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0005000-0xc0005fff irq 19 at device 19.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0005000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered pci0: <serial bus, USB> at device 19.2 (no driver attached) pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8410 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: secondary bus 6 pcib4: subordinate bus 8 pcib4: I/O decode 0xa000-0xafff pcib4: memory decode 0xc0200000-0xc02fffff pcib4: prefetched decode 0xfff00000-0xfffff pcib4: Subtractively decoded bridge. pci6: <ACPI PCI bus> on pcib4 pci6: physical bus=6 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=6, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000a000, size 8, enabled pcib4: requested I/O range 0xa000-0xa0ff: in range map[14]: type 1, range 32, base c0202000, size 8, enabled pcib4: requested memory range 0xc0202000-0xc02020ff: good pcib4: matched entry for 6.1.INTA pcib4: slot 1 INTA hardwired to IRQ 21 found-> vendor=0x14e4, dev=0x4318, revid=0x02 bus=6, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base c0200000, size 13, enabled pcib4: requested memory range 0xc0200000-0xc0201fff: good pcib4: matched entry for 6.2.INTA pcib4: slot 2 INTA hardwired to IRQ 22 found-> vendor=0x1524, dev=0x1412, revid=0x10 bus=6, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x44 (17000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0203000, size 12, enabled pcib4: requested memory range 0xc0203000-0xc0203fff: good pcib4: matched entry for 6.4.INTA pcib4: slot 4 INTA hardwired to IRQ 20 found-> vendor=0x1524, dev=0x0530, revid=0x01 bus=6, slot=4, func=1 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202400, size 7, enabled pcib4: requested memory range 0xc0202400-0xc020247f: good pcib4: matched entry for 6.4.INTB pcib4: slot 4 INTB hardwired to IRQ 23 found-> vendor=0x1524, dev=0x0550, revid=0x01 bus=6, slot=4, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202800, size 8, enabled pcib4: requested memory range 0xc0202800-0xc02028ff: good pcib4: matched entry for 6.4.INTB pcib4: slot 4 INTB hardwired to IRQ 23 found-> vendor=0x1524, dev=0x0520, revid=0x01 bus=6, slot=4, func=3 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202c00, size 7, enabled pcib4: requested memory range 0xc0202c00-0xc0202c7f: good pcib4: matched entry for 6.4.INTB pcib4: slot 4 INTB hardwired to IRQ 23 found-> vendor=0x1524, dev=0x0551, revid=0x01 bus=6, slot=4, func=4 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 8, memory disabled rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000 pcib4: rl0 requested I/O range 0xa000-0xa0ff: in range rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0202000-0xc02020ff irq 21 at device 1.0 on pci6 pcib4: rl0 requested I/O range 0xa000-0xa0ff: in range miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:16:d4:1c:30:be ioapic0: routing intpin 21 (PCI IRQ 21) to vector 52 rl0: [MPSAFE] ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem 0xc0200000-0xc0201fff irq 22 at device 2.0 on pci6 ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xc0200000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ndis0: [MPSAFE] ndis0: NDIS API version: 5.1 ndis0: bpf attached ndis0: Ethernet address: 00:16:cf:57:a3:7f ndis0: bpf attached cbb0: <PCI-CardBus Bridge> mem 0xc0203000-0xc0203fff irq 20 at device 4.0 on pci6 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0203000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x14121524 0x02100007 0x06070010 0x00824008 0x10: 0xc0203000 0x020000a0 0x20070706 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440114 0x40: 0x009f1025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x4060d021 0x00000000 0x00000000 0x90501212 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe010001 0x00c00000 0x00000012 0x0000000d 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00001003 0x00800080 0x10080400 0x000007fe 0xd0: 0x00e00000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci6: <memory, flash> at device 4.1 (no driver attached) pci6: <base peripheral> at device 4.2 (no driver attached) pci6: <memory, flash> at device 4.3 (no driver attached) pci6: <memory, flash> at device 4.4 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00003000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen0: vendor 0x0402 USB2.0 Camera, rev 2.00/1.00, addr 2 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99750416 hz Timecounter "TSC" frequency 1596015284 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached battery0: battery initialization start acpi_acad0: acline initialization start ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on IXP400 chip ad0: setting UDMA100 on IXP400 chip ad0: 76319MB <HTS541080G9AT00 MB4OA60A> at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on IXP400 chip acpi_tz0: _AC0: temperature 50.0 >= setpoint 50.0 acpi_tz0: switched from NONE to _AC0: 50.0C acd0: setting UDMA33 on IXP400 chip acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acd0: <Slimtype DVDRW SSM-8515S/GRS6> DVDR drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm photo disc SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 22 to local APIC 1 battery0: battery initialization done, tried 1 times Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init acpi_tz0: switched from _AC0 to NONE: 43.0C atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa acpi_lid0: Lid closed acpi_lid0: Lid opened # dmesg | grep pcm timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 # pkg_add oss-freebsd-v4.0rc2-179-i386.tbz Build Open Sound System for FreeBSD-i386 6.2-PRERELEASE Compiling module osscore Compiling module ali5455 Compiling module allegro Compiling module als300 Compiling module als4000 Compiling module apci97 Compiling module atiaudio Compiling module audigyls Compiling module audioloop Compiling module audiopci Compiling module cmi8788 Compiling module cmpci Compiling module cs4280 Compiling module cs4281 Compiling module digi32 Compiling module digi96 Compiling module emu10k1x Compiling module envy24 Compiling module envy24ht Compiling module fm801 Compiling module geode Compiling module hdaudio Compiling module ich Compiling module imux Compiling module lynxone Compiling module maestro Compiling module midiloop Compiling module midimix Compiling module neomagic Compiling module s3vibes Compiling module sblive Compiling module softoss Compiling module solo Compiling module sonorus Compiling module trident Compiling module via8233 Compiling module via97 Compiling module vmix Compiling module vortex Compiling module ymf7xx ----------------------------- Detected ATI High Definition Audio (SB450) Detected OSS Virtual mixer/synth driver ----------------------------- Starting Open Sound System Dec 23 23:05:54 kernel: hdaudio0: [MPSAFE] Dec 23 23:05:54 kernel: hdaudio: hdaudio: RIRB timeout (cad=3, nid=0, d=0, verb=f00, parm=0) Dec 23 23:05:54 kernel: hdaudio: hdaudio_mixer_attach: Codec #3 is not responding Dec 23 23:05:54 kernel: hdaudio: hdaudio: Codec attach failed (-5) Dec 23 23:05:54 kernel: pci1: driver added Dec 23 23:05:54 kernel: found-> vendor=0x1002, dev=0x5975, revid=0x00 Dec 23 23:05:54 kernel: bus=1, slot=5, func=0 Dec 23 23:05:54 kernel: class=03-00-00, hdrtype=0x00, mfdev=0 Dec 23 23:05:54 kernel: cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) Dec 23 23:05:54 kernel: lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) Dec 23 23:05:54 kernel: intpin=a, irq=17 Dec 23 23:05:54 kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Dec 23 23:05:54 kernel: pci1:5:0: reprobing on driver added Dec 23 23:05:54 kernel: pci2: driver added Dec 23 23:05:54 kernel: pci4: driver added Dec 23 23:05:54 kernel: pci6: driver added Dec 23 23:05:54 kernel: found-> vendor=0x1524, dev=0x0530, revid=0x01 Dec 23 23:05:54 kernel: bus=6, slot=4, func=1 Dec 23 23:05:54 kernel: class=05-01-00, hdrtype=0x00, mfdev=1 Dec 23 23:05:54 kernel: cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) Dec 23 23:05:54 kernel: lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) Dec 23 23:05:54 kernel: intpin=b, irq=23 Dec 23 23:05:54 kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Dec 23 23:05:54 kernel: pci6:4:1: reprobing on driver added Dec 23 23:05:54 kernel: found-> vendor=0x1524, dev=0x0550, revid=0x01 Dec 23 23:05:54 kernel: bus=6, slot=4, func=2 Dec 23 23:05:54 kernel: class=08-05-01, hdrtype=0x00, mfdev=1 Dec 23 23:05:54 kernel: cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) Dec 23 23:05:54 kernel: lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) Dec 23 23:05:54 kernel: intpin=b, irq=23 Dec 23 23:05:54 kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Dec 23 23:05:54 kernel: pci6:4:2: reprobing on driver added Dec 23 23:05:54 kernel: found-> vendor=0x1524, dev=0x0520, revid=0x01 Dec 23 23:05:54 kernel: bus=6, slot=4, func=3 Dec 23 23:05:54 kernel: class=05-01-00, hdrtype=0x00, mfdev=1 Dec 23 23:05:54 kernel: cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) Dec 23 23:05:54 kernel: lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) Dec 23 23:05:54 kernel: intpin=b, irq=23 Dec 23 23:05:54 kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Dec 23 23:05:54 kernel: pci6:4:3: reprobing on driver added Dec 23 23:05:54 kernel: found-> vendor=0x1524, dev=0x0551, revid=0x01 Dec 23 23:05:54 kernel: bus=6, slot=4, func=4 Dec 23 23:05:54 kernel: class=05-01-00, hdrtype=0x00, mfdev=1 Dec 23 23:05:54 kernel: cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) Dec 23 23:05:54 kernel: lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) Dec 23 23:05:54 kernel: intpin=b, irq=255 Dec 23 23:05:54 kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Dec 23 23:05:54 kernel: pci6:4:4: reprobing on driver added Dec 23 23:15:24 reboot: rebooted by arabian Rebooted the box but still didn't work. -- Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?499c70c0612231226v43aa86ew23ef31647fa7dde5>