Date: Wed, 7 Nov 2012 02:32:40 -0800 (PST) From: Jack Mc Lauren <jack.mclauren@yahoo.com> To: Paul Schenkeveld <freebsd@psconsult.nl>, "freebsd-embedded@freebsd.org" <freebsd-embedded@freebsd.org> Subject: nanobsd boot problem Message-ID: <1352284360.76432.YahooMailNeo@web126003.mail.ne1.yahoo.com> In-Reply-To: <20121030145024.GA16785@psconsult.nl> References: <1351605941.79450.YahooMailNeo@web126002.mail.ne1.yahoo.com> <20121030145024.GA16785@psconsult.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello friends=0AThanks for helping me building a nanobsd image. I did build= =0Aan image with no problems ( special thanks to=A0Paul Schenkeveld=A0=A0).= =0ABut I have some problems in the second phase of running a=0Adevice from = a nanobsd image. =0AAfter copying the image on a flash memory, and after I = set=0Athe system to boot up from flash memory, I just see a black screen an= d a=0Ablinking cursor ! looks like the boot device ( flash memory ) is not = recognized=0Aby the system.=0AHere are my debugging information , if they a= re not enough,=0Atell me please to send you necessary informations :=0Admes= g output :=0Ada0 at umass-sim0 bus 0 scbus0=0Atarget 0 lun 0=0Ada0: <UFD 2.= 0 Silicon-Power8G=0APMAP> Removable Direct Access SCSI-4 device=0Ada0: 40.0= 00MB/s transfers=0Ada0: 7388MB (15130624 512 byte=0Asectors: 255H 63S/T 941= C) =A0=A0=0Aaccording to the last line, I change the NANO_SECTS to 63=0Aand= NANO_HEADS to 255. (in nanobsd.sh).=0Als /dev output :=0A=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0 da0s1=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 da0s1a=A0=A0=A0=A0 ad6s= 1b=A0=A0=A0=A0=A0=A0=A0=A0=A0 da0s3=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ad6s1d=A0= =A0=A0=A0=A0=A0=A0=A0=A0 da0s4=0Aaccording to the first column , I set NANO= _DRIVE to da0. (in=0Ananobsd.sh)=0Aand here are the contents of the flash m= emory :=0A=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ls /mnt=0A.cshrc=A0= =A0=A0=A0=A0=A0=A0=A0=A0 boot=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 lib=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0 rescue=A0=A0=A0=A0=A0=A0=A0=A0=A0 usr=0A.profil= e=A0=A0=A0=A0=A0=A0=A0 cfg=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 libexec=A0= =A0=A0=A0=A0=A0=A0=A0 root=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 var=0A.snap=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0 conf=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 media=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0 sbin=0ACOPYRIGHT=A0=A0 =A0=A0=A0=A0dev=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0 mnt=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 sys=0Ab= in=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 etc=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 proc=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 tmp=0AAm I missing something ?? c= ould you please me please ? From owner-freebsd-embedded@FreeBSD.ORG Wed Nov 7 12:02:12 2012 Return-Path: <owner-freebsd-embedded@FreeBSD.ORG> Delivered-To: freebsd-embedded@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E09C8967 for <freebsd-embedded@freebsd.org>; Wed, 7 Nov 2012 12:02:12 +0000 (UTC) (envelope-from freebsd@psconsult.nl) Received: from mx1.psconsult.nl (unknown [IPv6:2001:7b8:30f:e0::5059:ee8a]) by mx1.freebsd.org (Postfix) with ESMTP id 8B0928FC0A for <freebsd-embedded@freebsd.org>; Wed, 7 Nov 2012 12:02:12 +0000 (UTC) Received: from mx1.psconsult.nl (mx1.hvnu.psconsult.nl [46.44.189.154]) by mx1.psconsult.nl (8.14.5/8.14.4) with ESMTP id qA7C24hX057066 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for <freebsd-embedded@freebsd.org>; Wed, 7 Nov 2012 13:02:10 +0100 (CET) (envelope-from freebsd@psconsult.nl) Received: (from paul@localhost) by mx1.psconsult.nl (8.14.5/8.14.4/Submit) id qA7C24T5057065 for freebsd-embedded@freebsd.org; Wed, 7 Nov 2012 13:02:04 +0100 (CET) (envelope-from freebsd@psconsult.nl) X-Authentication-Warning: mx1.psconsult.nl: paul set sender to freebsd@psconsult.nl using -f Date: Wed, 7 Nov 2012 13:02:04 +0100 From: Paul Schenkeveld <freebsd@psconsult.nl> To: freebsd-embedded@freebsd.org Subject: Re: nanobsd boot problem Message-ID: <20121107120204.GA51120@psconsult.nl> References: <1351605941.79450.YahooMailNeo@web126002.mail.ne1.yahoo.com> <20121030145024.GA16785@psconsult.nl> <1352284360.76432.YahooMailNeo@web126003.mail.ne1.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1352284360.76432.YahooMailNeo@web126003.mail.ne1.yahoo.com> User-Agent: Mutt/1.5.21 (2010-09-15) X-BeenThere: freebsd-embedded@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Dedicated and Embedded Systems <freebsd-embedded.freebsd.org> List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-embedded>, <mailto:freebsd-embedded-request@freebsd.org?subject=unsubscribe> List-Archive: <http://lists.freebsd.org/pipermail/freebsd-embedded>; List-Post: <mailto:freebsd-embedded@freebsd.org> List-Help: <mailto:freebsd-embedded-request@freebsd.org?subject=help> List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-embedded>, <mailto:freebsd-embedded-request@freebsd.org?subject=subscribe> X-List-Received-Date: Wed, 07 Nov 2012 12:02:12 -0000 Hi, On Wed, Nov 07, 2012 at 02:32:40AM -0800, Jack Mc Lauren wrote: > Hello friends > Thanks for helping me building a nanobsd image. I did build > an image with no problems ( special thanks to Paul Schenkeveld ). > But I have some problems in the second phase of running a > device from a nanobsd image. > After copying the image on a flash memory, and after I set > the system to boot up from flash memory, I just see a black screen and a > blinking cursor ! looks like the boot device ( flash memory ) is not recognized > by the system. Sounds like you've built a nanobsd image for serial console and try to run it on a system with [vga] console. Pls. confirm whether you have a vga console and PS/2 (or USB) keyboard or serial console. Pls. post the .conf file you used to build NanoBSD. > Here are my debugging information , if they are not enough, > tell me please to send you necessary informations : > dmesg output : > da0 at umass-sim0 bus 0 scbus0 > target 0 lun 0 > da0: <UFD 2.0 Silicon-Power8G > PMAP> Removable Direct Access SCSI-4 device > da0: 40.000MB/s transfers > da0: 7388MB (15130624 512 byte > sectors: 255H 63S/T 941C) > according to the last line, I change the NANO_SECTS to 63 > and NANO_HEADS to 255. (in nanobsd.sh). Never change variables inside nanobsd.sh, create a config file instead and the run "sh nanobsd.sh -c configfile.conf" > ls /dev output : > da0s1 da0s1a ad6s1b da0s3 ad6s1d da0s4 > according to the first column , I set NANO_DRIVE to da0. (in > nanobsd.sh) > and here are the contents of the flash memory : > ls /mnt > .cshrc boot lib rescue usr > .profile cfg libexec root var > .snap conf media sbin > COPYRIGHT dev mnt sys > bin etc proc tmp > Am I missing something ?? could you please me please ? Kind regards, Paul Schenkeveld
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1352284360.76432.YahooMailNeo>