Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Nov 99 08:25:17 +0100
From:      David Wetzel <dave@turbocat.de>
To:        ISDN-List <freebsd-isdn@FreeBSD.ORG>
Subject:   configuring @$%-Teles S0/16.3?
Message-ID:  <199911290725.IAA00526@cat.turbocat.de>

next in thread | raw e-mail | index | archive | help
hi,

I tried to configure a S0/16.3 in this computer, but no success. I tried  
0xd80, 0xe80 or 0xf80 with various IRQs but failed.

It is Revision 1.0 if that matters.

Thanks in advance for any hints.

orange# dmesg
NetBSD 1.4.1 (ORANGE) #10: Fri Nov 19 01:30:04 CET 1999
    root@orange:/usr/src/sys/arch/i386/compile/ORANGE
cpu0: family 5 model 1 step 5
cpu0: Intel Pentium (586-class)
real mem  = 66715648
avail mem = 60026880
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 2
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82434LX/NX PCI, Cache and Memory Controller (PCMC) (rev. 0x03)
pcib0 at pci0 dev 2 function 0
pcib0: Intel 82378ZB System I/O (SIO) (rev. 0x03)
ahc0 at pci0 dev 6 function 0
ahc0: interrupting at irq 10
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc0 channel 0: 8 targets, 8 luns per target
ahc0: target 0 synchronous at 5.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, M2694ES-512, 8134> SCSI1 0/direct fixed
sd0: 1033MB, 1819 cyl, 15 head, 77 sec, 512 bytes/sect x 2117025 sectors
ahc0: target 2 synchronous at 5.0MHz, offset = 0xc
scsibus0 targ 2 lun 0: <NEC, CD-ROM DRIVE:211, 1.0> SCSI2 5/cdrom removable  
not configured
ne2 at pci0 dev 7 function 0: RealTek 8029 Ethernet
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default auto
ne2: Ethernet address 00:e0:7d:72:43:7d
ne2: interrupting at irq 10
S3 86C928 (VGA prehistoric) at pci0 dev 8 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
npx0 at isa0 port 0xf0-0xff: using exception 16
WARNING: Pentium FDIV bug detected!
pcprobe: reset error 1
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 440 netmask 440 ttymask 442
i4b: ISDN call control device attached
i4btrc: 2 ISDN trace device(s) attached
i4bctl: ISDN system control port attached
i4brbch: 4 raw B channel access device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4bipr: 2 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bisppp: 2 ISDN SyncPPP device(s) attached
boot device: sd0
root on sd0a dumps on sd0b
pc: timeout updating leds


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199911290725.IAA00526>