Date: Wed, 8 Dec 2004 13:25:42 +0100 From: Michael Schuh <michael.schuh@gmail.com> To: freebsd-stable@freebsd.org Subject: vinum crashes the Box by using more then ten disks on RELENG_4 Message-ID: <1dbad31504120804251d841790@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
Ihas following System dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #1: Tue Nov 30 14:26:29 CET 2004
root@pdc.sarcom.de:/usr/obj/usr/src/sys/MYGENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (993.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1342169088 (1310712K bytes)
config> en apm0
config> q
avail memory = 1299566592 (1269108K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0564000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc056409c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fc320
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 15 -> irq 2
IOAPIC #1 intpin 1 -> irq 10
IOAPIC #1 intpin 0 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci0
IOAPIC #1 intpin 14 -> irq 13
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem
0xfcfff000-0xf
cffffff irq 13 at device 6.0 on pci1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xfcfff000-0xf
cffffff irq 13 at device 6.0 on pci1
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
aac0: <Dell PERC 2/Si> mem 0xf4000000-0xf7ffffff irq 2 at device 2.1 on pci0
aac0: i960RX 100MHz, 54MB cache memory, no battery support
aac0: Kernel 2.8-0, Build 6089, S/N c10d0
aac0: Supported Options=2558<DATA64,HOSTTIME,WINDOW4GB,SOFTERR,SGMAP64>
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec80-0xecff mem
0xfe103000-0xfe10
307f irq 10 at device 4.0 on pci0
xl0: Ethernet address: 00:10:5a:d0:09:69
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xec40-0xec7f mem
0xfe000000-0xfe0ffff
f,0xfe102000-0xfe102fff irq 11 at device 8.0 on pci0
fxp0: Ethernet address 00:b0:d0:ab:58:dd
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI model 4759 graphics accelerator> at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff
irq 5 at device
15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 12 -> irq 14
IOAPIC #1 intpin 8 -> irq 16
IOAPIC #1 intpin 4 -> irq 17
pci2: <PCI bus> on pcib2
isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0xdc00-0xdcff mem
0xef000000-0xef
000fff irq 14 at device 6.0 on pci2
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xd880-0xd8ff mem
0xef001400-0xef00
147f irq 16 at device 10.0 on pci2
xl1: Ethernet address: 00:50:04:ed:af:2f
miibus2: <MII bus> on xl1
xlphy1: <3Com internal media interface> on miibus2
miibus2: <MII bus> on xl1
xlphy1: <3Com internal media interface> on miibus2
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl2: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem
0xef001000-0xef00
107f irq 17 at device 14.0 on pci2
xl2: Ethernet address: 00:50:04:53:9e:63
miibus3: <MII bus> on xl2
xlphy2: <3Com internal media interface> on miibus3
xlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc9000-0xccfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Waiting 15 seconds for SCSI devices to settle
aacd0: <RAID 0/1> on aac0
aacd0: 17354MB (35542272 sectors)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/aacd0s1a
da0 at isp0 bus 0 target 0 lun 0
da0: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da0: 100.000MB/s transfers, Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at isp0 bus 0 target 1 lun 0
da1: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da1: 100.000MB/s transfers, Tagged Queueing Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at isp0 bus 0 target 2 lun 0
da2: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da2: 100.000MB/s transfers, Tagged Queueing Enabled
da2: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da3 at isp0 bus 0 target 3 lun 0
da3: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da3: 100.000MB/s transfers, Tagged Queueing Enabled
da3: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da4 at isp0 bus 0 target 4 lun 0
da4: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da4: 100.000MB/s transfers, Tagged Queueing Enabled
da4: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da5 at isp0 bus 0 target 5 lun 0
da5: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da5: 100.000MB/s transfers, Tagged Queueing Enabled
da5: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da6 at isp0 bus 0 target 6 lun 0
da6: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da6: 100.000MB/s transfers, Tagged Queueing Enabled
da6: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da7 at isp0 bus 0 target 7 lun 0
da7: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da7: 100.000MB/s transfers, Tagged Queueing Enabled
da7: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da8 at isp0 bus 0 target 8 lun 0
da8: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da8: 100.000MB/s transfers, Tagged Queueing Enabled
da8: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da9 at isp0 bus 0 target 9 lun 0
da9: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da9: 100.000MB/s transfers, Tagged Queueing Enabled
da9: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da10 at isp0 bus 0 target 10 lun 0
da10: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da10: 100.000MB/s transfers, Tagged Queueing Enabled
da10: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da11 at isp0 bus 0 target 11 lun 0
da11: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da11: 100.000MB/s transfers, Tagged Queueing Enabled
da11: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da12 at isp0 bus 0 target 12 lun 0
da12: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da12: 100.000MB/s transfers, Tagged Queueing Enabled
da12: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da13 at isp0 bus 0 target 13 lun 0
da13: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da13: 100.000MB/s transfers, Tagged Queueing Enabled
da13: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da14 at isp0 bus 0 target 14 lun 0
da14: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da14: 100.000MB/s transfers, Tagged Queueing Enabled
da14: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da15 at isp0 bus 0 target 15 lun 0
da15: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da15: 100.000MB/s transfers, Tagged Queueing Enabled
da15: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da16 at isp0 bus 0 target 16 lun 0
da16: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da16: 100.000MB/s transfers, Tagged Queueing Enabled
da16: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da17 at isp0 bus 0 target 17 lun 0
da17: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da17: 100.000MB/s transfers, Tagged Queueing Enabled
da17: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da18 at isp0 bus 0 target 18 lun 0
da18: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da18: 100.000MB/s transfers, Tagged Queueing Enabled
da18: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da19 at isp0 bus 0 target 19 lun 0
da19: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da19: 100.000MB/s transfers, Tagged Queueing Enabled
da19: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da20 at isp0 bus 0 target 20 lun 0
da20: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da20: 100.000MB/s transfers, Tagged Queueing Enabled
da20: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da21 at isp0 bus 0 target 21 lun 0
da21: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da21: 100.000MB/s transfers, Tagged Queueing Enabled
da21: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da22 at isp0 bus 0 target 22 lun 0
da22: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da22: 100.000MB/s transfers, Tagged Queueing Enabled
da22: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da23 at isp0 bus 0 target 23 lun 0
da23: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da23: 100.000MB/s transfers, Tagged Queueing Enabled
da23: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da24 at isp0 bus 0 target 24 lun 0
da24: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da24: 100.000MB/s transfers, Tagged Queueing Enabled
da24: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da25 at isp0 bus 0 target 25 lun 0
da25: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da25: 100.000MB/s transfers, Tagged Queueing Enabled
da25: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da26 at isp0 bus 0 target 26 lun 0
da26: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da26: 100.000MB/s transfers, Tagged Queueing Enabled
da26: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da27 at isp0 bus 0 target 27 lun 0
da27: <SEAGATE ST336704FC FA55> Fixed Direct Access SCSI-3 device
da27: 100.000MB/s transfers, Tagged Queueing Enabled
da27: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
WARNING: / was not properly dismounted
aac0: **Monitor** ID(0:01:0) Timeout detected on cmd[0x2a]
aac0: **Monitor** SCSI Channel[0]: Timeout Detected On 1 Command(s)
My vinum.conf
#first7
drive disk0 device /dev/da0s1h
drive disk1 device /dev/da2s1h
drive disk2 device /dev/da4s1h
drive disk3 device /dev/da6s1h
drive disk4 device /dev/da8s1h
drive disk5 device /dev/da10s1h
drive disk6 device /dev/da12s1h
#next 7
drive disk7 device /dev/da1s1h
drive disk8 device /dev/da3s1h
drive disk9 device /dev/da5s1h
drive disk10 device /dev/da7s1h
drive disk11 device /dev/da9s1h
drive disk12 device /dev/da11s1h
drive disk13 device /dev/da13s1h
volume big
plex name big.p0 org striped 512k
sd name big.p0.sd0 drive drive0 size 0
sd name big.p0.sd1 drive drive1 size 0
sd name big.p1.sd2 drive drive9 size 0
sd name big.p1.sd3 drive drive10 size 0
sd name big.p1.sd4 drive drive11 size 0
sd name big.p1.sd5 drive drive12 size 0
sd name big.p1.sd6 drive drive13 size 0
With this configuration vinum crashes the Machine with this Message:
15: drive disk12 device /dev/da11s1h
** 15 : Invalid argument
If i let the last 4 disks out of my Configuration so vinum makes
all right. It sounds like vinum cannot right use more devices as 10
da[0-9]s1h is ok
da[1-2][0-9]s1h is not.
Ah, my Target is to build a RAID10 Mirror of Stripes
might be a count problem?
Sorry thats are all error-messages that i can see.
thanks for your interest and help
michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1dbad31504120804251d841790>