Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 03 Nov 2005 00:08:24 +0900 (JST)
From:      Munehiro Matsuda <haro@h4.dion.ne.jp>
To:        jkim@FreeBSD.org
Cc:        freebsd-acpi@FreeBSD.org, freebsd-current@FreeBSD.org
Subject:   Panic on boot with new ACPI-CA (Re: [HEADSUP] ACPI-CA 20051021 import)
Message-ID:  <20051103.000824.74756516.haro@h4.dion.ne.jp>
In-Reply-To: <200511011749.46273.jkim@FreeBSD.org>
References:  <200511011701.31444.jkim@FreeBSD.org> <200511011749.46273.jkim@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
From: Jung-uk Kim <jkim@FreeBSD.org>
Date: Tue, 1 Nov 2005 17:49:44 -0500
::On Tuesday 01 November 2005 05:01 pm, Jung-uk Kim wrote:
::> ACPI-CA 20051021 will be imported any minute now.  I will let you
::> know when completed.
::
::ACPI-CA 20051021 import is completed.
::
::Thanks!
::
::Jung-uk Kim

Hi,

After the import of new ACPI-CA code, I get system panic on boot,
where I used to get "can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ - AE_BAD_DATA" message.

If you need more info, please let me know.

Here's hand written down panic messages.
=--------------------------------------------------------------------------
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
Memory modified after free 0xc1ee1600(124) val=c @ 0xc1ee1600
panic: Most recently used by acpica

cpuid = 0
KDB: enter: panic
[thread pid 0 tid 0]
Stopped at   kbt_enter+0x2b: nop
db> bt
Tracing pid 0 tid 0 td 0xc0736780
kdb_enter(c06cc93e) at kdb_enter+0x2b
panic(c06e42e7,c089c1a8,c06e42b8,c1ee1600,8c) at panic+0x127
mtrash_ctor(c1ee1600,80,0,1) at mtrash_ctor+0x4d
uma_zalloc_arg(c104a1e0,0,1) at uma_zalloc_arg+0x10f
malloc(68,c089ef00,1,c0c20bb4,c087e562) at malloc+0xb2
AcpiOsAllocate(68,0,c1ece1e0,4,c0c20be0) at AcpiOsAllocate+0x12
AcpiUtCallocate(68,10,c089b337,157,c0c20bec) at AcpiUtCallocate+0x16
AcpiGetObjectInfo(c1ece1e0,c0c20bf8,0,c1ece1e0,ffffffff) at AcpiGetObjectInfo+0x5b
acpi_MatchHid(0,c089f740,6,c1ece1e0,0) at acpi_MatchHid+0x32
acpi_probe_child(c1ece1e0,4,c1e9c800,0,0) at acpi_probe_child+0x94
AcpiNsWalkNamespace(0,ffffffff,64,1,c0883c98) at AcpiNsWalkNamespace+0xa1
AcpiWalkNamespace(0,ffffffff,64,c0883c98,c1e9c800) at AcpiWalkNamespace+0x3b
acpi_attach(c1e9c800) at acpi_attach+0x4ff
device_attach(c1e9c800,0,c1e9c800,c1e9d300,0) at device_attach+0x58
device_probe_and attach(c1e9c800) at device_probe_and_attach+0xe0
bus_generic_attach(c1e9d300,c1e9d300,c1e9d300,c0c20d40,c0529340) at bus_generic_attach+0x16
nexus_attach(c1e9d300) at nexus_attach+0x13
device_attach(c1e9d300,c0533914,c1e9d300,c0721bb0,c28000) at device_attach+0x58
device_probe_and_attach(c1e9d300) at device_probe_and_attach+0xe0
root_bus_configure(c0c20d88,c04eb592,0,c1ec00,c1e000) at root_bus_configure+0x16configure(0,c1ec00,c1e000,0,c04392f5) at configure+0x9
mi_startup() at mi_startup+0x96
begin() at begine+0x2c
=--------------------------------------------------------------------------

Following is boot message from the last kernel, just before the
import of new code.
=--------------------------------------------------------------------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #135: Mon Oct 31 21:33:52 JST 2005
    haro@legacy.ttr.kubota.co.jp:/home/haro/tmp/sys-7/i386/compile/LEGACY
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.10GHz (1097.26-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 787808256 (751 MB)
avail memory = 761475072 (726 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ - AE_BAD_DATA
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xeff8-0xefff mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 10 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xcfe0-0xcfff irq 10 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xcf80-0xcf9f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xcf60-0xcf7f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xcffffc00-0xcfffffff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xcfeff000-0xcfefffff irq 11 at device 5.0 on pci1
iwi0: Ethernet address: 00:0e:35:c2:a2:7b
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xcf00-0xcf3f mem 0xcfefe000-0xcfefefff irq 11 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7b:eb:71:23
cbb0: <TI6411 PCI-CardBus Bridge> at device 11.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI6411 PCI-CardBus Bridge> at device 11.1 on pci1
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <1394 Open Host Controller Interface> mem 0xcfefd800-0xcfefdfff,0xcfef8000-0xcfefbfff irq 11 at device 11.2 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:39:00:00:72:41:eb
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:72:41:eb
fwe0: Ethernet address: 02:00:39:72:41:eb
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci1: <base peripheral> at device 11.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbe00-0xbeff,0xbdc0-0xbdff mem 0xcfdffe00-0xcfdfffff,0xcfdffd00-0xcfdffdff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_toshiba0: <Toshiba HCI Extras> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1097256406 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <HTS541060G9AT00 MB3WA5EJ> at ata0-master UDMA100
acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.00> at ata1-master UDMA33
pccard1: Allocation failed for cfe 1
sio4: <KDDI W01K> at port 0x2f8-0x2ff irq 11 function 0 config 2 on pccard1
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
Trying to mount root from ufs:/dev/ad0s4a
=--------------------------------------------------------------------------

Thanks in advance,
  Haro
=------------------------------------------------------------------------------
           _ _    Munehiro (haro) Matsuda
 -|- /_\  |_|_|   Internet Solution Dept., Kubota Graphics Technologies Inc.
 /|\ |_|  |_|_|   2-8-8 Shinjuku Shinjuku-ku Tokyo 160-0022, Japan
                  Tel: +81-3-3225-0767  Fax: +81-3-3225-0740





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051103.000824.74756516.haro>