Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Sep 1995 13:23:18 -0700 (PDT)
From:      Julian Elischer <julian@ref.tfs.com>
To:        ugen@latte.worldbank.org (Ugen J.S.Antsilevich)
Cc:        freebsd-questions@FreeBSD.org
Subject:   Re: DOS partitition can't be seen...
Message-ID:  <199509142023.NAA03650@ref.tfs.com>
In-Reply-To: <Chameleon.4.00.4.950914151739.ugen@ugen> from "Ugen J.S.Antsilevich" at Sep 14, 95 03:16:00 pm

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
you are looking at the wrong device..look at /dev/rwd0

> 
> Hi...
> 
> Below is the output of fdisk when i run it on
> my brand-new-out-of CDROM 2.0.5 system..Same happaned
> on -current as long as i was able to run it - the 1st partittion 
> which supposed to be the dos one is not in the list. I can't see
> or mount it...Any suggestions on what to do????
> Thanx
> -------------------
> 
> ******* Working on device /dev/rwd0d ******* 
> parameters extracted from in-core disklabel are: 
> cylinders=412 heads=64 sectors/track=63 (4032 blks/cyl) 
> 
> parameters to be used for BIOS calculations are: 
> cylinders=412 heads=64 sectors/track=63 (4032 blks/cyl) 
> 
> fdisk: Invalid fdisk partition table found 
> Warning: BIOS sector numbering starts with sector 1 
> Information from DOS bootblock is: 
> The data for partition 0 is: 
> <UNUSED> 
> The data for partition 1 is: 
> <UNUSED> 
> The data for partition 2 is: 
> <UNUSED> 
> The data for partition 3 is: 
> sysid 165,(FreeBSD/NetBSD/386BSD) 
>     start 1, size 1661183 (811 Meg), flag 80 
>         beg: cyl 0/ sector 2/ head 0; 
>         end: cyl 412/ sector 1/ head 0 
> --Ugen
> 
> 




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?199509142023.NAA03650>