Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 6 Dec 1995 04:58:16 -0500 (EST)
From:      Peter Dufault <dufault@hda.com>
To:        richard@thehub.com.au (Richard J Uren)
Cc:        freebsd-questions@FreeBSD.org
Subject:   Re: SCSI disk not identifying properly.
Message-ID:  <199512060958.EAA08432@hda.com>
In-Reply-To: <Pine.BSF.3.91.951204140011.313A-100000@smople.thehub.com.au> from "Richard J Uren" at Dec 4, 95 02:07:51 pm

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
> So I just got a new Conner CFP4207S out of the box & plugged it in to my
> adaptec 2940 SCSI card and behold the Conner identifies itself 
> as SCSI ID 0,1,2,3,4,5 & 6 on the bus. But the card gets its own ID (7) 
> correct.

The firmware is probably smart enough not to probe its own ID.

> 
> Other devices are : Seagate SCSI ID 2.

I assume this doesn't show up since the Conner showed up as ID 2?

> This is before FreeBSD even boots - at the BIOS SCSI id inquiry phase.

Does it have an external ID selector switch installed upside down?

--

Peter Dufault               Real Time Machine Control and Simulation
HD Associates, Inc.         Voice: 508 433 6936
dufault@hda.com             Fax:   508 433 5267



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?199512060958.EAA08432>