Date: Mon, 23 Dec 2002 12:08:33 +0200 From: Danny Braniss <danny@cs.huji.ac.il> To: freebsd-hackers@FreeBSD.ORG Subject: Compaq-prolient ML370/smp problem Message-ID: <E18QPVh-0006Jg-00@cs.huji.ac.il>
next in thread | raw e-mail | index | archive | help
hi, this box works ok with non SMP kernel, but the SMP gets stuck in APIC_IO: Testing 8254 interrupt delivery the kernel is 4.7-stable - cvsuped today. im including a dmesg output from a non-SMP kernel Happy holidays danny Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #7: Thu Dec 12 10:54:17 IST 2002 danny@dev:/r+d/obj/r+d/4.7/src/sys/HUJI Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (2387.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC,<b31>> real memory = 1073717248 (1048552K bytes) avail memory = 1039552512 (1015188K bytes) Preloaded elf kernel "kernel" at 0xc056a000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <ATI Mach64-GR graphics accelerator> at 3.0 pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 4.0 irq 5 pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 4.2 irq 10 isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 11 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <Host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x3000-0x30ff mem 0xf7ff0000-0xf7ff0fff irq 15 at device 3.0 on pci1 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x3400-0x34ff mem 0xf7fe0000-0xf7fe0fff irq 15 at device 3.1 on pci1 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs bge0: <Broadcom BCM5703X Gigabit Ethernet> mem 0xf7fd0000-0xf7fdffff irq 11 at device 4.0 on pci1 bge0: Ethernet address: 00:08:02:de:1b:99 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib2: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib3: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci6: <PCI bus> on pcib6 pcib10: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci10: <PCI bus> on pcib10 pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci4: <PCI bus> on pcib4 pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci5: <PCI bus> on pcib5 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0726 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xee000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IPsec: Initialized Security Association Processing. acd0: CDROM <COMPAQ CD-ROM SC-148C> at ata0-master PIO4 Waiting 5 seconds for SCSI devices to settle pass1 at ahc0 bus 0 target 15 lun 0 pass1: <COMPAQ PROLIANT 4L6I 1.78> Fixed Processor SCSI-2 device pass1: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: <COMPAQ BD036659CC 3B00> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) Mounting root from nfs: NFS ROOT: 132.65.16.100:/d/2 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E18QPVh-0006Jg-00>