Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 24 Feb 2003 22:09:06 +0100
From:      Richard Nyberg <rnyberg@it.su.se>
To:        freebsd-current@freebsd.org
Subject:   problems with umass device
Message-ID:  <20030224210906.GA35883@murmeldjur.it.su.se>

next in thread | raw e-mail | index | archive | help
Hello current-users!

I'm not having any luck getting my USB flash drive to work.
The machine runs current as of today (24:th feb).
Below is the output I get when I connect the drive.
Does anyone have any ideas?

	-Richard

----
usbd_new_device bus=0xc404a000 port=2 depth=1 speed=2
usbd_new_device: adding unit addr=2, rev=110, class=0, subclass=0, protocol=0, maxpacket=64, len=18, speed=2
usbd_new_device: new dev (addr 2), dev=0xc4178d80, parent=0xc4059f00
usbd_probe_and_attach: trying device specific drivers
usbd_probe_and_attach: no device specific driver found
usbd_probe_and_attach: looping over 1 configurations
usbd_set_config_index: status=0x0001, error=NORMAL_COMPLETION
usbd_set_config_index: (addr 1) cno=2 attr=0xc0, selfpowered=1, power=100
usbd_set_config_index: set config 1
umass0: Creative Tech NOMAD MuVo, rev 1.10/0.01, addr 2
umass0: SCSI over Bulk-Only; quirks = 0x000
umass0: Get Max Lun not supported (IOERROR)
umass0:0:0:-1: Attached to scbus0 as device 0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <CREATIVE NOMAD_MUVO 0001> Removable Direct Access SCSI-4 device 
da0: 1.000MB/s transfers
da0: 125MB (256001 512 byte sectors: 64H 32S/T 125C)
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
[	Many repetitions of the umass0: triplet above...	]
Opened disk da0 -> 5

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030224210906.GA35883>