Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 18 Feb 2010 22:21:11 -0500
From:      Chris <behrnetworks@gmail.com>
To:        Matt Reimer <mattjreimer@gmail.com>
Cc:        Scot Hetzel <swhetzel@gmail.com>, Pegasus Mc Cleaft <ken@mthelicon.com>, freebsd-current@freebsd.org
Subject:   Re: Seeing the dreaded "ZFS: i/o error - all block copies  unavailable" on 9.0-CURRENT
Message-ID:  <64aa03031002181921m2d00966cx6a3bb2c6e761970d@mail.gmail.com>
In-Reply-To: <f383264b1002180950t51ddb421i51b36886e7da6295@mail.gmail.com>
References:  <64aa03031002161803h667734cal4d668b9eb9c0a1a8@mail.gmail.com> <790a9fff1002161842g17de8ecfvf2cfa8c77f03c32@mail.gmail.com> <64aa03031002161849s7b66b9e3l727aafd2afd3d596@mail.gmail.com> <201002171840.41088.ken@mthelicon.com> <790a9fff1002171303u4b40a90cr626ef856efee473b@mail.gmail.com> <64aa03031002171416s128ff196y92a5be5a6abadeb@mail.gmail.com> <64aa03031002171949gdfbd99ci8eab7f29399cc011@mail.gmail.com> <f383264b1002172226s9a76ae6sac55dca22dface77@mail.gmail.com> <64aa03031002180531n5e07e3bcj455ba09bdf5e293e@mail.gmail.com> <f383264b1002180950t51ddb421i51b36886e7da6295@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
> I think you're probably right about this being a BIOS problem.
> Does the gptzfsboot 'status' command show the same output when you run it
> with and without the F12 workaround? Here's what I see from FreeBSD and f=
rom
> gptzfsboot:
> [root ~]# zpool status
> =A0=A0pool: glamdring
> =A0state: ONLINE
> =A0scrub: none requested
> config:
>
> =A0=A0 =A0 =A0 =A0NAME =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 STATE =A0 =A0 =
READ WRITE CKSUM
> =A0=A0 =A0 =A0 =A0glamdring =A0 =A0 =A0 =A0 =A0 =A0 =A0ONLINE =A0 =A0 =A0=
 0 =A0 =A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0raidz2 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ONLINE =A0 =A0 =
=A0 0 =A0 =A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-0 =A0ONLINE =A0 =A0 =A0 0 =A0 =
=A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-1 =A0ONLINE =A0 =A0 =A0 0 =A0 =
=A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-2 =A0ONLINE =A0 =A0 =A0 0 =A0 =
=A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-3 =A0ONLINE =A0 =A0 =A0 0 =A0 =
=A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-4 =A0ONLINE =A0 =A0 =A0 0 =A0 =
=A0 0 =A0 =A0 0
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-5 =A0ONLINE =A0 =A0 =A0 0 =A0 =
=A0 0 =A0 =A0 0
>
> errors: No known data errors
> ...
>
> /boot.config: -Dh
> Default: glamdring:/boot/zfsloader
> boot: status =A0pool: glamdring
> config:
>
> =A0=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0NAME =A0 =A0 =A0STATE
> =A0=A0 =A0 =A0 =A0 =A0 =A0 =A0 glamdring =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0raidz2 =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-0 =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-1 =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-2 =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-3 =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-4 =A0 =A0 ONLINE
> =A0=A0 =A0 =A0 =A0 =A0 =A0label/glamdring-5 =A0 =A0 ONLINE
> Matt


I'm seeing some difference in the bootloader output between using the
F12 workaround or not:

F12 workaround mode:

FreeBSD/i386 boot
Default: zroot:/boot/zfsloader
boot: status
config:

             NAME     STATE
             zroot    ONLINE
        gpt/disk0   ONLINE


No F12 key pressed:

FreeBSD/i386 boot
Default: zroot:/boot/kernel/kernel
config:

              NAME     STATE
               zroot    ONLINE
          gpt/disk0   ONLINE


What's up with the differences between the Default boot setting?



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64aa03031002181921m2d00966cx6a3bb2c6e761970d>