Date: Mon, 17 Oct 2005 16:06:14 -0600 (MDT) From: "M. Warner Losh" <imp@bsdimp.com> To: freebsd@psam.se Cc: freebsd-current@freebsd.org Subject: Re: Thoshiba Tecra 8000 with 3com 3CXFE575CT Message-ID: <20051017.160614.96601900.imp@bsdimp.com> In-Reply-To: <43541A46.2050705@psam.se> References: <4353F3D5.6060309@psam.se> <20051017.130631.73017921.imp@bsdimp.com> <43541A46.2050705@psam.se>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <43541A46.2050705@psam.se>
Psadi <freebsd@psam.se> writes:
: M. Warner Losh skrev:
:
: >: When I start it outside and then connect the card it will detect and
: >: configure it correctly.
: >
: >OK. This is a HUGE clue. One that shouldn't be overlooked :-). What
: >it is telling me is that FUNCTION interrupts aren't getting through,
: >but STATUS interrupts ARE getting through. I'll have to go re-read my
: >two TOPIC data sheets to make sure, but I think that the TOPIC chips,
: >especially the older ones, have a number of knobs for function
: >interrupts that are not in the standard bridge chipset.
: >
: >Please refresh my recollection: Did this used to work with 5.4? IIRC,
: >I did some work to fix o2 micro hangs that disabled the function
: >interrupts during card insertion by routing them via IRQ 1 (which the
: >o2micro actually doesn't route, so they just disappear). Maybe that
: >work around had bad effects for the TOPIC95B that you have?
: >
: >Warner
: >
: >
: >
: >
: I have no problem with the network when I run FreeBSD 5.4. I have no
: watchdog timeouts. And I can cvsup the source and ports without any problem.
:
: As a side not ACPI was disable when I tested if it detected the network
: card or not when I inserted it. Though since I didnt notice any diffrent
: when it was on or off I dont think it has any impact. I did do this test
: earlier before you asked but then I just didnt think it was relevant. Of
: this I know it works with ACPI on also since I was running with ACPI
: when I tried it.
Do you have a second network card, 32- or 16-bits, that you can test
this with also? We need to preclude xl driver bustage in general, or
specific to your submodel as well.
Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051017.160614.96601900.imp>