Date: Sun, 25 Dec 2005 23:00:45 +0200 From: Vaida Bogdan <vaida.bogdan@gmail.com> To: freebsd-acpi@freebsd.org Subject: Re: fujitsu notebook and acpi resume from sleep Message-ID: <12848a3b0512251300y4e932bafofdcd9896abe73990@mail.gmail.com> In-Reply-To: <12848a3b0512251121j2b8e87caid3bf74ec8b275da0@mail.gmail.com> References: <12848a3b0512230717uf7d9513rfcdf8904aab498ba@mail.gmail.com> <12848a3b0512251121j2b8e87caid3bf74ec8b275da0@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Note that I also tried using apm (http://www.freebsdforums.org/forums/showthread.php?s=3D&threadid=3D18153): 1) Kernel config has: "device apm" 2) Load kernel module at boot: apm_load=3D"YES" to /boot/loader.conf 3) Hint.apm.0.disabled=3D"0" in /boot/device.hints 4) Start apm automatically at boot: apm_enable=3D"YES" in /etc/rc.conf 5) Enable APM daemon: apmd_enable=3D"YES" to /etc/rc.conf and I get the followin error when starting apm: apm: can't open /dev/apm: no such file or directory /etc/rc: WARNING: /dev/apmctl not found; kernel is missing apm (4) (kldstat shows no acpi loaded, I also tried using apm and pmtimer in my kernel config file) On 12/25/05, Vaida Bogdan <vaida.bogdan@gmail.com> wrote: > I run 6.0-RELEASE > > It seems the hdd doesn't "wake up" after a resume with apic disabled: > > fwohci0:fwohci_pci_suspend > fwohci0: device physically ejected? > fw0hci0: suspend request ignored (not ready yet) > fwohci0: Phy 1394a available S400, 2 ports > fwohci0: Link S400, max_rec 2048 bytes > fwohci0: Initiate bus reset > fwohci0: Bus reset > fwohci0: node_id=3D0xc800ffc0 gen=3D0 CYCLEMASTER MODE > firewire0: 1 nodes maxhop <=3D0, cable IRM=3D0 (me) > firewire0: bus manager 0 (me) > fwohci0: phy int > ad4 detached > g_vfs_done() ad4s1a [READ(offset=3D53...,length=3D2048)] error=3D6 > g_vfs_done()... > vnode_pager_getpages: I/O read error > g_vfs_done... > [ seems I can run bash builtin commands =3D> memory was restored ok ] > [ it also seems ad4 remains detached ] > cd /bin > ./ls > g_vfs_done() ... > vnode_pager_getpages: I/O read error > ./ls: Input/Output error > > On 12/23/05, Vaida Bogdan <vaida.bogdan@gmail.com> wrote: > > I have a Fujitsu Siemens AMILO Pro V2040 notebook and when I try to > > resume an acpi sleep command it freezes: > > > > If I power on after a sleep (acpiconf -s 3): > > > > ioapic_suspend: not_implemented! > > ioapic_suspend: not_implemented! > > [...] > > fwohci0: Phy 1394a available S400, 2 ports > > fwohci0: Link S400, max_rec 2048 bytes > > fwohci0: Initiate bus reset > > [ Freezes ] > > > > acpiconf -s 5 - poweroff > > acpiconf -s 4 - poweroff > > acpiconf -s 2 - sleep state S2 not supported by bios > > acpiconf -s 1 - sleep state S1 not supported by bios > > > > Attached: dmesg_acpi.txt (dmesg|grep acpi) and fujitsu_siemens.asl > > (acpidump -t -d) > > > > Any ideeas on how to solve this? > > > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?12848a3b0512251300y4e932bafofdcd9896abe73990>