Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 Apr 2006 15:28:45 +0200 (CEST)
From:      Emil Thelin <emil@hostname.nu>
To:        freebsd-questions@freebsd.org
Subject:   Re: DL320 G3 Adaptec or Intel RAID?
Message-ID:  <20060410151614.Y88998@erika.hostname.nu>
In-Reply-To: <010701c65c9b$add39a10$0a86a8c0@avalon.lan>
References:  <010701c65c9b$add39a10$0a86a8c0@avalon.lan>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 10 Apr 2006, No@SPAM@mgEDV.net wrote:

> we've got an hp proliant dl320 g3 with an embedded SATA-150
> raid controller. loading 6.1B4 shows ad4 and ad6 as normal
> disks but the RAID controller or the configured array is not
> shown at all.
>
> during POST the raid bios announces as:
> "Adaptec Embedded SATA HostRAID BIOS V3.0-1 1255"
>
> the embedded controller shows as:
> "Controller #00: ICH6R HostRAID at PCI Bus: 00, Dev: 1F, Func: 02"
>
> the configured array drive is shown something like:
> "Array 0 - RAID 1: 76GB optimal"
>
> can anyone tell if this adaptec/intel combination is supported
> by freebsd in any way? the ICH6R is listed in the hw-section,
> but the os doesn't find this special one.

Feel free to correct me if I'm wrong here, the ICH6R is a software raid 
controller and its not supported in FreeBSD. Atleast not in 5.X.

However, if you can live without its raid-function the card itself works 
fine in FreeBSD.

/e



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060410151614.Y88998>