From owner-freebsd-current Wed Feb 3 09:01:30 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA10724 for freebsd-current-outgoing; Wed, 3 Feb 1999 09:01:30 -0800 (PST) (envelope-from owner-freebsd-current@FreeBSD.ORG) Received: from genius.cirx.org (r00t.m1.ntu.edu.tw [140.112.240.59]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA10712 for ; Wed, 3 Feb 1999 09:01:23 -0800 (PST) (envelope-from clkao@CirX.ORG) Received: (from clkao@localhost) by genius.cirx.org (8.9.2/8.9.1) id AAA43583; Thu, 4 Feb 1999 00:23:47 +0800 (CST) (envelope-from clkao@CirX.ORG) Date: Thu, 4 Feb 1999 00:23:47 +0800 (CST) Message-Id: <199902031623.AAA43583@genius.cirx.org> X-Authentication-Warning: genius.cirx.org: clkao set sender to clkao@CirX.ORG using -f From: Chia-liang Kao To: wpaul@skynet.ctr.columbia.edu CC: current@FreeBSD.ORG In-reply-to: <199902031613.LAA06847@skynet.ctr.columbia.edu> (message from Bill Paul on Wed, 3 Feb 1999 11:12:59 -0500 (EST)) Subject: Re: problem with vr0 References: <199902031613.LAA06847@skynet.ctr.columbia.edu> Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG * From: Bill Paul * Date: Wed, 3 Feb 1999 11:12:59 -0500 (EST) * * What kind of machine/CPU does your friend have? my friend's: CPU: Pentium II (233.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping=4 Features=0x80f9ff chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x01 on pci0.4.0 ide_pci0: rev 0x01 on pci0.4.1 chip3: rev 0x01 on pci0.4.3 vr0: rev 0x06 int a irq 10 on pci0.11.0 vr0: Ethernet address: 00:80:c8:ef:3c:3f vr0: autoneg complete, link status good (half-duplex, 10Mbps) Mine: CPU: Pentium/P54C (133.64-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf chip0: rev 0x01 on pci0.0.0 chip1: rev 0x01 on pci0.7.0 ide_pci0: rev 0x00 on pci0.7.1 vr0: rev 0x06 int a irq 12 on pci0.19.0 vr0: Ethernet address: 00:80:c8:ef:82:09 vr0: autoneg complete, link status good (half-duplex, 10Mbps) * Hm. I have some more questions: * * - In your first posting, you mentioned this: * vr0: rev 0x06 int a irq 12 on pci0.19.0 * IRQ 12 is normally used by the mouse (if you have a PS/2 mouse). Do you * have a mouse or PS/2 mouse port on this machine? (I suspect you don't but * I have to ask.) No, I use a mouse connected to com port. Actually we thought of the problem caused by irq conflicts, and we made sure it wasn't happening. It is very strange that when I used the incorporated diagnose program, I can connect to my friend's dfe530, running the same program. * - How many PCI bus slots does your machine have? I have 3 PCI bus slots. It's quite an old machine. * - Have you tried putting the vr0 card in a different slot? Have you tried * putting it in the slot where the de0 card is now? Yes, I had previously done exactly the same test you mentioned. * - What PCI chipset do you have? The test machine in which I currently have * my sample VIA Rhine card installed is an Intel Pentium 200 system that * says the following: As you can see in the top of this mail, my chipset configuration seemed to be identical as yours. * - Can you show me the output of the following: * * pciconf -r pci0:19:0 0xc * * I want to see what the latency timer setting looks like. It shows `0x00002008' To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message