Date: Mon, 22 Dec 2003 17:49:16 -0600 From: Peter Schultz <pmes@bis.midco.net> To: John Baldwin <jhb@FreeBSD.org> Cc: freebsd-current@freebsd.org Subject: Re: new interrupts not working for me Message-ID: <3FE782FC.5040408@bis.midco.net> In-Reply-To: <XFMail.20031222134012.jhb@FreeBSD.org> References: <XFMail.20031222134012.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
John Baldwin wrote: > On 22-Dec-2003 Peter Schultz wrote: > >>John Baldwin wrote: >> >>>On 05-Nov-2003 Peter Schultz wrote: >>> >>> >>>>I have a Tyan S1832DL w/dual pii 350s and it's not able to boot. Seems >>>>to be having trouble with my adaptec scsi controller, I get a whole >>>>bunch of output like this hand transcribed bit, it comes after "waiting >>>>15 seconds for scsi devices to settle": >>>> >>>>ahc0 timeout SCB already complete interrupts may not be functioning >>>>Infinite interrupt loop INTSTAT=0(probe3:ahc0:0:3:0): SCB 0x6 - timed out >>>> >>>>Anyone else seeing this? There are probably 100+ related lines of >>>>output, I'll have to configure serial debugging if you need to see it. >>> >>> >>>The dmesg output excluding all the ahc0 errors would help figure out >>>why your interrupts aren't working. However, I just committed a patch >>>that might fix your problem. >>> >> >>Here is the output I was able to capture: > > > Disable ACPI for now. It looks like you have a buggy BIOS. > Can you put your ASL up at a URL somewhere? > http://bis.midco.net/pmes/tyan_s1832dl.asl Pete...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FE782FC.5040408>