Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 16 Oct 2002 10:21:26 +0200
From:      Kent Palmkvist <Kent.Palmkvist@home.se>
To:        Alex <freebsd-reply@akruijff.dds.nl>, freebsd-stable@FreeBSD.ORG
Subject:   Re: ata problem on old P60
Message-ID:  <5.1.1.5.0.20021015155825.03769a60@garm.isy.liu.se>
In-Reply-To: <14451851178.20021015000644@dds.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello,

Your problem seems more related to the way the RZ1000 chip is handled. In 
the bootup text you can see that the primary ata controller is not found. I 
have had a similar problem with a Pentium 75 board, and I ended up 
disabling the RZ1000 chip in BIOS, using only an already existing isa bus 
ATA interface on the motherboard.

There has already been a small discussion on this around 27 Sept 2002 on 
the stable list. The subject line was "setrootbyname error upon 
install/upgrade". There seemed to be no good conclusion on what to do to 
solve the problem.


Best regards

/Kent



At 00:06 2002-10-15 +0200, Alex wrote:

>Hello FreeBSD users,
>
>I've just installed FreeBSD 4.7 via FTP. The install went perfect only
>after this is has trouble during the boot. I have a Pentium 60 MHz
>with 32M of memory and 96M of swap. I had FreeBSD on this computer
>before and there where no problem until the new ata kernel. (FreeBSD
>4.5+). I read something for a workaround for ata cdrom players. Is
>there something like this i can try for other ata hardware? I included
>the entire bootup text.
>
> > CPU: Pentium/P5 60Mhz 586-CUP class
> > Origin = "GenuineINtel" Id = 0x517 Stepping = 7
> > Features = 0x1bf<FPU, VME, DE, PSE, TSC, MSR, MCE, CX8>
> > real memory = 32M
> > avail = 27M
> > Preload elf kernel "kernel" at 0xc050f000
> > INtel Pentium detected, installing workaround for F00F bug
> > md0 Mallock disk
> > npx0: <math processor> on motherboeard
> > npx0: INT 16 interface
> > pcib0: <Host to PCI bridge> on motherboeard
> > pci0: PCI bus on pcib0
> > atapci0: <RZ 100? ATA controller !warning~ buggy chip data loss 
> possible> port 0x3f4-0x3f7,0x1f0-0x1f7 at device 1.0 on pci0
> > atapci0: busmastering DMA not supported
> > atapci0: busmastering DMA disabled
> > ata2: at 0x1f0 on atapci0
> > ata2 unable to allocate interrupt
> > device_probe_and _attach ata2 attach returned 6
> > isab0 <INtel 82378IB PCI to ISA bride> at device 2.0 on pci0
> > isa0 ISA BUS on isab0
> > xl0 Thernet address ----
> > miibus0: MII BUS on xl0
> > xlphy0 <3c905c, 10/100 internal PHY> on miibus0
> > xlphy0: ----
> > pci0: <ATA mach64-CT graphics accelerator at 12.0
> > ed0 --
> > ed0 ---
> > orm0: option roms at iomem 
> 0xc00000xc7fff,0xc80000-0xc87ff,0xed000-0xedfff on isa0
> > fdc0: NEC 72065B or clone at port 0x3f00x3f5, 0x3f7 irq 6 drq 2 on isa0
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0 1440-KB 3.5 drive on fdc0 drive 0
> > ata at port 0x170-0x177,0x376 irq 15 on isa0
> > atkbd0 |AT keybord flags 0x1 irq 1 on atkbdc0
> > kbd0 at atkbd0
> > vga0 Generic ISA VGA at port 0x3c0-0x3df iomem oxa0000-0xbffff on isa0
> > sc0 System console at flags 0x100 on isao
> > sc0 VGA 16 virtuals consoles flags=0x300
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 8250
> > sio1: configures irq 3 not in bitmap of probed irqs 0
> > ppc0: parallel port not found
> > acd0: CDROM <GDC-R542B> at ata1-master BIOSPIO
> > MOunt root from ufs:/dev/ad0s1a
> > no such device 'ad'
> > setrootbyname failed
> > ffs_mountroot can't fine rootvp
> > root mount failed: 6
> >
> > mountroot> ....
>
>
>--
>Tanks in advance for answering me,
>Alex
>
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-stable" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.1.5.0.20021015155825.03769a60>