Date: Tue, 26 Nov 2002 08:21:40 -0700 From: "Michael Blood" <Michael@matraex.com> To: <freebsd-smp@freebsd.org> Subject: RE: Adaptec ultra320, FreeBSD 4.7, SMP hang at boot Message-ID: <010e01c2955f$882c46b0$0200a8c0@boxwood> In-Reply-To: <142339311406.20021126142653@netasq.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is the exact same problem that I had (and still have ) a few weeks ago on 4.5. My calls with Adaptec place the problem with how the driver handles the "apic"? Any way they had no resolution other than to say. "we have had some of the same problems with Linux but we have resolved them by passing certain parameters to the kernel at boot up". I don't know what the parameters are only that they worked for linux. From what I understand there are no parameters that can be passed into the FreeBSD kernel for the Adaptec driver. Sorry that this email is inconclusive but just so you know it is not just you who has this problem with SuperMicro SMP. I will try 5.0 just to see if I can get it to work on my system. Thanks Michael Blood -----Original Message----- From: owner-freebsd-smp@FreeBSD.ORG [mailto:owner-freebsd-smp@FreeBSD.ORG] On Behalf Of Fabien THOMAS Sent: Tuesday, November 26, 2002 6:27 AM To: freebsd-smp@freebsd.org Subject: Adaptec ultra320, FreeBSD 4.7, SMP hang at boot Actually i'm trying to run an embedded controller (7901A Ultra320) on a Supermicro motherboard (PDDP8-G2) under FreeBSD 4.7 using the ahd driver. With the GENERIC kernel the card seem to work fine but each time i run an SMP kernel the system lock up before init and after one or two minute the system dump the card state. the funny things is that under FreeBSD 5.0 DP2 the system is working fine. can you help me ? fabien here the associated dmesg (with AHD_DEBUG and AHD_DEBUG_FLAGS=0xFFFF for the SMP dump) BAD (SMP): >> >> Copyright (c) 1992-2002 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, >> 1993, 1994 >> The Regents of the University of California. All >> rights reserved. >> FreeBSD 4.7-RELEASE #4: Wed Jan 2 02:38:30 GMT 2002 >> root@:/usr/src/sys/compile/SMP >> Timecounter "i8254" frequency 1193182 Hz >> CPU: Pentium 4 (1999.79-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 >> >> Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE >> P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS >> E2,SS,<b28>,ACC> >> real memory = 536346624 (523776K bytes) >> avail memory = 517337088 (505212K bytes) >> Programming 24 pins in IOAPIC #0 >> IOAPIC #0 intpin 2 -> irq 0 >> Programming 24 pins in IOAPIC #1 >> Programming 24 pins in IOAPIC #2 >> Programming 24 pins in IOAPIC #3 >> Programming 24 pins in IOAPIC #4 >> FreeBSD/SMP: Multiprocessor motherboard >> cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 >> (AP): apic id: 6, version: 0x00050014, at 0xfee00000 io0 (APIC): >> apic id: 2, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: >> 3, version: 0x00178020, at 0xfec80000 io2 (APIC): apic id: 4, >> version: 0x00178020, at 0xfec80400 io3 (APIC): apic id: 5, version: >> 0x00178020, at 0xfec81000 io4 (APIC): apic id: 8, version: >> 0x00178020, at 0xfec81400 Preloaded elf kernel "kernel" at >> 0xc0466000. Pentium Pro MTRR support enabled >> md0: Malloc disk >> Using $PIR table, 29 entries at 0xc00fddf0 >> npx0: <math processor> on motherboard >> npx0: INT 16 interface >> pcib0: <Host to PCI bridge> on motherboard >> IOAPIC #0 intpin 16 -> irq 2 >> IOAPIC #0 intpin 19 -> irq 10 >> IOAPIC #0 intpin 18 -> irq 11 >> pci0: <PCI bus> on pcib0 >> pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 >> pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at >> device 2.0 on pci0 >> pci1: <PCI bus> on pcib1 >> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 >> pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 29.0 on pci1 >> IOAPIC #2 intpin 0 -> irq 16 >> IOAPIC #2 intpin 1 -> irq 17 >> pci2: <PCI bus> on pcib2 >> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 16 at device >> 1.0 on pci2 >> em0: Speed:1000 Mbps Duplex:Full >> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 17 at device >> 1.1 on pci2 >> em1: Speed:N/A Duplex:N/A >> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 >> pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 31.0 on pci1 >> IOAPIC #1 intpin 0 -> irq 18 >> IOAPIC #1 intpin 1 -> irq 19 >> IOAPIC #1 intpin 4 -> irq 20 >> IOAPIC #1 intpin 5 -> irq 21 >> pci3: <PCI bus> on pcib3 >> em2: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x4000-0x403f mem 0xfc300000-0xfc31ffff irq 18 at device >> 1.0 on pci3 >> em2: Speed:N/A Duplex:N/A >> em3: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x4040-0x407f mem 0xfc320000-0xfc33ffff irq 19 at device >> 1.1 on pci3 >> em3: Speed:N/A Duplex:N/A >> em4: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x4080-0x40bf mem 0xfc340000-0xfc35ffff irq 20 at device >> 2.0 on pci3 >> em4: Speed:N/A Duplex:N/A >> em5: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x40c0-0x40ff mem 0xfc360000-0xfc37ffff irq 21 at device >> 2.1 on pci3 >> em5: Speed:N/A Duplex:N/A >> pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at >> device 3.0 on pci0 >> pci4: <PCI bus> on pcib4 >> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 >> pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 29.0 on pci4 >> IOAPIC #4 intpin 0 -> irq 22 >> IOAPIC #4 intpin 1 -> irq 23 >> pci5: <PCI bus> on pcib5 >> em6: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x5000-0x503f mem 0xfc500000-0xfc51ffff irq 22 at device >> 1.0 on pci5 >> em6: Speed:N/A Duplex:N/A >> em7: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x5040-0x507f mem 0xfc520000-0xfc53ffff irq 23 at device >> 1.1 on pci5 >> em7: Speed:N/A Duplex:N/A >> em8: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x5080-0x50bf mem 0xfc540000-0xfc55ffff irq 11 at device >> 2.0 on pci5 >> em8: Speed:N/A Duplex:N/A >> em9: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x50c0-0x50ff mem 0xfc560000-0xfc57ffff irq 11 at device >> 2.1 on pci5 >> em9: Speed:N/A Duplex:N/A >> em10: <Intel(R) PRO/1000 Network Connection, Version - >> 1.3.14> port 0x5400-0x543f mem 0xfc580000-0xfc59ffff irq 11 >> at device 3.0 on pci5 >> em10: Speed:N/A Duplex:N/A >> em11: <Intel(R) PRO/1000 Network Connection, Version - >> 1.3.14> port 0x5440-0x547f mem 0xfc5a0000-0xfc5bffff irq 11 >> at device 3.1 on pci5 >> em11: Speed:N/A Duplex:N/A >> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 >> pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 31.0 on pci4 >> pci6: <PCI bus> on pcib6 >> ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port >> 0x6000-0x60ff,0x6400-0x64ff mem 0xfc600000-0xfc601fff irq 11 >> at device 2.0 on pci6 >> ahd0: scb size = 0x4c, hscb size - 0x40 >> ahd0: Seeprom Contents: >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x9f4 >> 0x146 >> 0x2807 >> 0x10 >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0x400 >> 0xb3c7 >> (0): 1:8:fe:3f >> (1): 1:8:fe:3f >> (2): 1:8:fe:3f >> (3): 1:8:fe:3f >> (4): 1:8:fe:3f >> (5): 1:8:fe:3f >> (6): 1:8:fe:3f >> (7): 1:8:fe:3f >> (8): 1:8:fe:3f >> (9): 1:8:fe:3f >> (10): 1:8:fe:3f >> (11): 1:8:fe:3f >> (12): 1:8:fe:3f >> (13): 1:8:fe:3f >> (14): 1:8:fe:3f >> (15): 1:8:fe:3f >> ahd0: ahd_sglist_allocsize = 0x3000 >> Mapped SG data >> Mapped sense data >> Setting mode 0x0 >> Setting mode 0x11 >> Setting mode 0x44 >> ahd0: Setting up iocell workaround >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or >> 66Mhz, 512 SCBs >> ahd1: <Adaptec 7901A Ultra320 SCSI adapter> port >> 0x6800-0x68ff,0x6c00-0x6cff mem 0xfc602000-0xfc603fff irq 11 >> at device 2.1 on pci6 >> ahd1: scb size = 0x4c, hscb size - 0x40 >> ahd1: Seeprom Contents: >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x17c8 >> 0x9f4 >> 0x146 >> 0x2807 >> 0x10 >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0xffff >> 0x400 >> 0xb3c7 >> (0): 1:8:fe:3f >> (1): 1:8:fe:3f >> (2): 1:8:fe:3f >> (3): 1:8:fe:3f >> (4): 1:8:fe:3f >> (5): 1:8:fe:3f >> (6): 1:8:fe:3f >> (7): 1:8:fe:3f >> (8): 1:8:fe:3f >> (9): 1:8:fe:3f >> (10): 1:8:fe:3f >> (11): 1:8:fe:3f >> (12): 1:8:fe:3f >> (13): 1:8:fe:3f >> (14): 1:8:fe:3f >> (15): 1:8:fe:3f >> ahd1: ahd_sglist_allocsize = 0x3000 >> Mapped SG data >> Mapped sense data >> Setting mode 0x0 >> Setting mode 0x11 >> Setting mode 0x44 >> ahd1: Setting up iocell workaround >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> aic7901A: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or >> 66Mhz, 512 SCBs >> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port >> 0x2000-0x201f irq 2 at device 29.0 on pci0 >> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 >> usb0: USB revision 1.0 >> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub0: 2 ports with 2 removable, self powered >> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port >> 0x2020-0x203f irq 10 at device 29.1 on pci0 >> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 >> usb1: USB revision 1.0 >> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub1: 2 ports with 2 removable, self powered >> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port >> 0x2040-0x205f irq 11 at device 29.2 on pci0 >> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 >> usb2: USB revision 1.0 >> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub2: 2 ports with 2 removable, self powered >> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device >> 30.0 on pci0 >> pci7: <PCI bus> on pcib7 >> pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2 >> isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at >> device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel ICH3 ATA100 controller> port >> 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 >> mem 0xfc000000-0xfc0003ff irq 0 at device 31.1 on pci0 >> ata0: at 0x1f0 irq 14 on atapci0 >> ata1: at 0x170 irq 15 on atapci0 >> pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 >> orm0: <Option ROMs> at iomem >> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcaff >> f,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xce >> fff on isa0 >> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 >> drq 2 on isa0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >> kbd0 at atkbd0 >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem >> 0xa0000-0xbffff on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >> sio0: type 16550A >> sio1 at port 0x2f8-0x2ff irq 3 on isa0 >> sio1: type 16550A >> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >> ppc0: FIFO with 16/16/9 bytes threshold >> lpt0: <Printer> on ppbus0 >> lpt0: Interrupt-driven port >> ppi0: <Parallel I/O> on ppbus0 >> plip0: <PLIP network interface> on ppbus0 >> APIC_IO: Testing 8254 interrupt delivery >> APIC_IO: routing 8254 via IOAPIC #0 intpin 2 >> SMP: AP CPU #1 Launched! >> acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata0-master PIO4 >> Waiting 15 seconds for SCSI devices to settle >> Reading mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Setting mode 0x11 >> Setting mode 0x33 >> Setting mode 0x0 >> Setting mode 0x33 >> Setting mode 0x0 >> Setting mode 0x11 >> Setting mode 0x44 >> ahd0: Setting up iocell workaround >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> ahd0: Clearing FIFO 0 >> Setting mode 0x0 >> Setting mode 0x33 >> ahd0: Clearing FIFO 1 >> Setting mode 0x11 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Reading mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Setting mode 0x11 >> Setting mode 0x33 >> Setting mode 0x0 >> Setting mode 0x33 >> Setting mode 0x0 >> Setting mode 0x11 >> Setting mode 0x44 >> ahd1: Setting up iocell workaround >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> ahd1: Clearing FIFO 0 >> Setting mode 0x0 >> Setting mode 0x33 >> ahd1: Clearing FIFO 1 >> Setting mode 0x11 >> Setting mode 0x33 >> Setting mode 0x22 >> Setting mode 0x33 >> Reading mode 0x33 >> Reading mode 0x22 >> Setting mode 0x33 >> Setting mode 0x22 >> ------------------------------------------------------------------------ ------------------------- GOOD (GENERIC) >> >> >> Copyright (c) 1992-2002 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, >> 1993, 1994 >> The Regents of the University of California. All >> rights reserved. >> FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 >> root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC >> Timecounter "i8254" frequency 1193182 Hz >> CPU: Pentium 4 (1999.79-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 >> >> Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE >> P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS >> E2,SS,<b28>,ACC> >> real memory = 536346624 (523776K bytes) >> avail memory = 516665344 (504556K bytes) >> Pentium Pro MTRR support enabled >> md0: Malloc disk >> Using $PIR table, 29 entries at 0xc00fddf0 >> npx0: <math processor> on motherboard >> npx0: INT 16 interface >> pcib0: <Host to PCI bridge> on motherboard >> pci0: <PCI bus> on pcib0 >> pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 >> pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at >> device 2.0 on pci0 >> pci1: <PCI bus> on pcib1 >> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 >> pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 29.0 on pci1 >> pci2: <PCI bus> on pcib2 >> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 12 at device >> 1.0 on pci2 >> em0: Speed:1000 Mbps Duplex:Full >> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 12 at device >> 1.1 on pci2 >> em1: Speed:N/A Duplex:N/A >> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 >> pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 31.0 on pci1 >> pci3: <PCI bus> on pcib3 >> em2: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x4000-0x403f mem 0xfc300000-0xfc31ffff irq 12 at device >> 1.0 on pci3 >> em2: Speed:N/A Duplex:N/A >> em3: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x4040-0x407f mem 0xfc320000-0xfc33ffff irq 12 at device >> 1.1 on pci3 >> em3: Speed:N/A Duplex:N/A >> em4: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x4080-0x40bf mem 0xfc340000-0xfc35ffff irq 12 at device >> 2.0 on pci3 >> em4: Speed:N/A Duplex:N/A >> em5: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x40c0-0x40ff mem 0xfc360000-0xfc37ffff irq 12 at device >> 2.1 on pci3 >> em5: Speed:N/A Duplex:N/A >> pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at >> device 3.0 on pci0 >> pci4: <PCI bus> on pcib4 >> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 >> pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 29.0 on pci4 >> pci5: <PCI bus> on pcib5 >> em6: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x5000-0x503f mem 0xfc500000-0xfc51ffff irq 11 at device >> 1.0 on pci5 >> em6: Speed:N/A Duplex:N/A >> em7: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x5040-0x507f mem 0xfc520000-0xfc53ffff irq 11 at device >> 1.1 on pci5 >> em7: Speed:N/A Duplex:N/A >> em8: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x5080-0x50bf mem 0xfc540000-0xfc55ffff irq 11 at device >> 2.0 on pci5 >> em8: Speed:N/A Duplex:N/A >> em9: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> >> port 0x50c0-0x50ff mem 0xfc560000-0xfc57ffff irq 11 at device >> 2.1 on pci5 >> em9: Speed:N/A Duplex:N/A >> em10: <Intel(R) PRO/1000 Network Connection, Version - >> 1.3.14> port 0x5400-0x543f mem 0xfc580000-0xfc59ffff irq 11 >> at device 3.0 on pci5 >> em10: Speed:N/A Duplex:N/A >> em11: <Intel(R) PRO/1000 Network Connection, Version - >> 1.3.14> port 0x5440-0x547f mem 0xfc5a0000-0xfc5bffff irq 11 >> at device 3.1 on pci5 >> em11: Speed:N/A Duplex:N/A >> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 >> pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at >> device 31.0 on pci4 >> pci6: <PCI bus> on pcib6 >> ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port >> 0x6000-0x60ff,0x6400-0x64ff mem 0xfc600000-0xfc601fff irq 11 >> at device 2.0 on pci6 >> aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or >> 66Mhz, 512 SCBs >> ahd1: <Adaptec 7901A Ultra320 SCSI adapter> port >> 0x6800-0x68ff,0x6c00-0x6cff mem 0xfc602000-0xfc603fff irq 11 >> at device 2.1 on pci6 >> aic7901A: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or >> 66Mhz, 512 SCBs >> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port >> 0x2000-0x201f irq 11 at device 29.0 on pci0 >> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 >> usb0: USB revision 1.0 >> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub0: 2 ports with 2 removable, self powered >> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port >> 0x2020-0x203f irq 10 at device 29.1 on pci0 >> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 >> usb1: USB revision 1.0 >> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub1: 2 ports with 2 removable, self powered >> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port >> 0x2040-0x205f irq 5 at device 29.2 on pci0 >> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 >> usb2: USB revision 1.0 >> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub2: 2 ports with 2 removable, self powered >> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device >> 30.0 on pci0 >> pci7: <PCI bus> on pcib7 >> pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11 >> isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at >> device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel ICH3 ATA100 controller> port >> 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 >> mem 0xfc000000-0xfc0003ff irq 0 at device 31.1 on pci0 >> ata0: at 0x1f0 irq 14 on atapci0 >> ata1: at 0x170 irq 15 on atapci0 >> pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 >> orm0: <Option ROMs> at iomem >> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcaff >> f,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xce >> fff on isa0 >> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 >> drq 2 on isa0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >> kbd0 at atkbd0 >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem >> 0xa0000-0xbffff on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >> sio0: type 16550A >> sio1 at port 0x2f8-0x2ff irq 3 on isa0 >> sio1: type 16550A >> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >> ppc0: FIFO with 16/16/9 bytes threshold >> plip0: <PLIP network interface> on ppbus0 >> lpt0: <Printer> on ppbus0 >> lpt0: Interrupt-driven port >> ppi0: <Parallel I/O> on ppbus0 >> acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata0-master PIO4 >> Waiting 15 seconds for SCSI devices to settle >> Mounting root from ufs:da0s1a >> da0 at ahd0 bus 0 target 0 lun 0 >> da0: <SEAGATE ST336737LW 0105> Fixed Direct Access SCSI-3 device >> da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), >> Tagged Queueing Enabled >> da0: 35242MB (72176566 512 byte sectors: 255H 63S/T 4492C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?010e01c2955f$882c46b0$0200a8c0>