Date: Thu, 15 Jan 2004 21:44:16 +0100 From: Andre Oppermann <andre@freebsd.org> To: David Gilbert <dgilbert@dclg.ca> Cc: freebsd-current@freebsd.org Subject: Re: kern/61215: off-by-one error likely in ip_fragment() Message-ID: <4006FBA0.F2057876@freebsd.org> References: <40055744.5030607@freebsd.org> <16390.61995.829098.247043@canoe.dclg.ca> <16390.63251.901089.277458@canoe.dclg.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
David Gilbert wrote:
>
> >>>>> "Andre" == Andre Oppermann <andre@freebsd.org> writes:
>
> >> I'm not sure what's up. Your patch wouldn't apply to v1.17 of my
> >> if_gre.c, so something's wrong with the patch. Regardless, I
> >> applied the patch by hand and things didn't work yet.
>
> Andre> Didn't it apply because of patch complaining or because it
> Andre> didn't match at all?
>
> It looked like it was mostly whitespace errors or somesuch. The patch
> algorythm couldn't find the are to patch.
>
> ... however, as I said... I was able to patch it by hand.
Ok.
> >> The kernel didn't crash, but packets routed into the tunnel didn't
> >> show up on the outbound interface. I my case, the machine has
> >> three ethernet-like interfaces and the gre.
> >>
> >> wi0 and sis0 are internal networks. dc0 is the external network
> >> interface. A /32 route for the far end of the tunnel exists (and
> >> works on the new kernel ... it pings), but pings into the tunnel
> >> don't generate traffic on dc0 (at least according to tcpdump).
>
> Andre> Do you enable "link1" on your GRE interface?
>
> What does link1 do to gre? It hasn't been necessary before.
>
> Andre> What does ifconfig -a show?
>
> Ifconfig -a output was normal. I didn't save the new output, but the
> old output is the same ... save the fact that the new output prints
> the tunnel endpoints.
>
> gre0: flags=9011<UP,POINTOPOINT,LINK0,MULTICAST> mtu 1476
> inet6 fe80::2d0:9ff:fee4:bbc2%gre0 prefixlen 64 scopeid 0x5
> inet 66.246.133.114 --> 66.246.133.113 netmask 0xfffffffc
Where are the outer addresses?
It should look like this (at least I was able to get correct packets
out of it this way):
gre0: flags=b051<UP,POINTOPOINT,RUNNING,LINK0,LINK1,MULTICAST> mtu 1476
tunnel inet 62.48.0.50 --> 62.48.0.47
inet 192.168.1.1 --> 192.168.1.2 netmask 0xffffff00
I get to this by configuring the following:
ifconfig gre0 create # create gre0 interface
ifconfig gre0 tunnel 62.48.0.50 62.48.0.47 # outer addresses
ifconfig gre0 192.168.1.1 192.168.1.2 # inner addresses
ifconfig gre0 link1 # chose nexthop computation method
ifconfig gre0 up # enable gre tunnel
--
Andre
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4006FBA0.F2057876>