Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 4 Dec 2002 18:53:51 +0200
From:      Karo Salminen <karo@karo.kaista.com>
To:        freebsd-mobile@freebsd.org
Cc:        freebsd-stable@freebsd.org
Subject:   USB mouse problem (kernel)
Message-ID:  <20021204185351.79b90c22.karo@karo.kaista.com>
In-Reply-To: <20021203231106.18b5fbb9.karo@karo.kaista.com>
References:  <20021203102856.21259da9.karo@karo.kaista.com> <1038932129.21052.6.camel@natewks2.ad.newisys.com> <20021203193952.706c2f58.karo@karo.kaista.com> <20021203231106.18b5fbb9.karo@karo.kaista.com>

next in thread | previous in thread | raw e-mail | index | archive | help
--=.30).kZGV?ONWrP
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hello,

the problem is that I can't get USB Mouse to work. At boot it wakes up,
but in
uhub kernel is idling and then reports of device problem:

uhub0: 2 ports with 2 removable, self powered
uhub0: device problem, disabling port 1

Tried with GENERIC, same symptom appears.

dmesg:
FreeBSD 4.7-STABLE #1: Thu Nov 28 20:45:17 EET 2002
    root@yabba.kortex.jyu.fi:/usr/obj/annex/src/sys/YABBA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 125763584 (122816K bytes)
avail memory = 118411264 (115636K bytes)
Preloaded elf kernel "kernel" at 0xc03e0000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc0366be0 (1000040)
VESA: Trident CYBER 8620
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: No call entry point
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8620 VGA-compatible display device> at 0.0 irq 11
pcm0: <Acer Labs M5451> port 0x8000-0x80ff mem 0x81a00000-0x81a00fff irq
10 at device 6.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin ATA66 controller> port 0x7050-0x705f irq 15
at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 11 at device 19.0 on
pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card 16-bit bus (classic)> on pcic0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x81c00000-0x81c00fff irq 11 at device 20.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: device problem, disabling port 1
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
pccard: card inserted, slot 0
pccard: card removed, slot 0
ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-7002Bc> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
ed1 at port 0x300-0x31f irq 11 slot 0 on pccard0
ed1: address 00:20:cb:82:09:32, type NE2000 (16 bit) 
-- 
E-mail: karo@karo.kaista.com 
GSM: +358 45 6728280

--=.30).kZGV?ONWrP
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iD8DBQE97jMlvt6lNXuj7xcRAqFuAJ94r14+5dDF2mGMtbulcSQQif9m9gCeJbv3
qvUbYkchgpHQh73Y5Dtx33c=
=924f
-----END PGP SIGNATURE-----

--=.30).kZGV?ONWrP--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021204185351.79b90c22.karo>