From owner-freebsd-questions Sun Mar 3 15:54:22 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id PAA21326 for questions-outgoing; Sun, 3 Mar 1996 15:54:22 -0800 (PST) Received: from DGS.dgsys.com (root@dgs.dgsys.com [204.97.64.1]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id PAA21321 for ; Sun, 3 Mar 1996 15:54:20 -0800 (PST) Received: from steffi.dgsys.com by DGS.dgsys.com (5.0/SMI-SVR4) id AA00770; Sun, 3 Mar 1996 18:54:03 -0500 Received: (from robert@localhost) by steffi.dgsys.com (8.7.4/8.7.3) id XAA00384; Sun, 3 Mar 1996 23:53:10 -0500 (EST) Date: Sun, 3 Mar 1996 23:53:10 -0500 (EST) From: Robert Nicholson Message-Id: <199603040453.XAA00384@steffi.dgsys.com> To: questions@freebsd.org Subject: more on the 1 second of sound only problem Sender: owner-questions@freebsd.org Precedence: bulk I thought it might be wise to mention my configuration.. FreeBSD 2.1.0-RELEASE #0: Sun Mar 3 20:17:51 EST 1996 root@steffi.dgsys.com:/usr/src/sys/compile/STEFFI CPU: 133-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x52b Stepping=11 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 30781440 (30060K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A psm0 at 0x60-0x63 irq 12 on motherboard fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 7 drq 1 on isa sb0: Probing for devices on the PCI bus: chip0 rev 2 on pci0:0 chip1 rev 2 on pci0:7 de0 rev 35 int a irq 9 on pci0:10 de0: DC21040 [10Mb/s] pass 2.3 Ethernet address 00:00:92:90:a0:7d de0: enabling Thinwire/AUI port vga0 rev 1 int a irq 10 on pci0:11 ncr0 rev 3 int a irq 11 on pci0:12 ncr0 waiting for scsi devices to settle (ncr0:1:0): "QUANTUM XP34300 581H" type 0 fixed SCSI 2 sd0(ncr0:1:0): Direct-Access sd0(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 4101MB (8399520 512 byte sectors) (ncr0:2:0): 200ns (5 Mb/sec) offset 8. (ncr0:2:0): "IBM DPES-31080 S31K" type 0 fixed SCSI 2 sd1(ncr0:2:0): Direct-Access sd1(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1034MB (2118144 512 byte sectors) (ncr0:3:0): "HP C1533A 9503" type 1 removable SCSI 2 st0(ncr0:3:0): Sequential-Access st0(ncr0:3:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. density code 0x13, variable blocks, write-enabled (ncr0:4:0): "TOSHIBA CD-ROM XM-3701TA 2965" type 5 removable SCSI 2 cd0(ncr0:4:0): CD-ROM cd0(ncr0:4:0): asynchronous. cd0(ncr0:4:0): NOT READY asc:4,1 cd0(ncr0:4:0): Logical unit is in process of becoming ready can't get the size ------------------------------------------------------------------------------- plus my kernel # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $ # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" ident GENERIC maxusers 10 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options COMPAT_LINUX #options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=05" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options SYSVSHM options SYSVSEM options SYSVMSG config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 #controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #device wcd0 #IDE CD-ROM controller ncr0 #controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller ahc1 at isa? bio irq ? vector ahcintr #controller ahb0 at isa? bio irq ? vector ahbintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 device st0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr #device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device lpt2 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Options for psm: # options PSM_NO_RESET for the `psm' driver # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 #device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's controller snd0 # SoundBlaster DSP driver - for SB, SB Pro, SB16, PAS(emulating SB) device sb0 at isa? port 0x220 irq 7 drq 1 vector sbintr #device sbxvi0 at isa? drq 5