From owner-freebsd-questions Fri May 5 22:25:51 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA22894 for questions-outgoing; Fri, 5 May 1995 22:25:51 -0700 Received: from icus.com (icus.com [198.252.182.104]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id WAA22888 for ; Fri, 5 May 1995 22:25:48 -0700 Received: (from Ufrshair@localhost) by icus.com (8.6.9/8.6.9-noident) with UUCP id AAA06802 for questions@FreeBSD.org; Sat, 6 May 1995 00:22:41 -0500 Received: (from Ucactus@localhost) by frshaire.wiz.com (8.6.11/8.6.11) with UUCP id XAA19571 for questions@FreeBSD.org; Fri, 5 May 1995 23:48:19 -0500 Received: (from jeff@localhost) by tenforwd.wiz.com (8.6.9/8.6.9) id XAA00245 for questions@FreeBSD.org; Fri, 5 May 1995 23:44:42 -0500 From: Jeff Haynes Message-Id: <199505060444.XAA00245@tenforwd.wiz.com> Subject: Driver for SMC Ultra ethernet card. To: questions@FreeBSD.org Date: Fri, 5 May 1995 23:44:42 -0500 (CDT) X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 512 Sender: questions-owner@FreeBSD.org Precedence: bulk I am trying to get an SMC elite ultra working in FreeBSD. I assumed that I am supposed to use the ed0 driver, but upon boot up I get a message that says "failed to clear shared memory at c8000 - check configuration". I have the config on the card set to irq 10 io base 280 iomem c8000. The SMC "ezstart" utility shows the adapter type as 8216T. What driver do I use for this card? If it is ed0, any suggestions on what might be wrong? Thanks -- Jeff Haynes jeff@tenforwd.wiz.com http:/www.cactus.org/~jhaynes/