Date: Tue, 15 Aug 2017 09:57:32 +0000 From: Yoshiro MIHIRA <sanpei.ml@gmail.com> To: Boris Samorodov <bsam@passap.ru>, freebsd-arm@freebsd.org Subject: Re: boot.ini file for Odroid-C1 on FreeBSD wiki page Message-ID: <CALwmBx1Vv6_tZFtg7AzmJSBL4-HS8VzyncNo34HbBc_wJf66NQ@mail.gmail.com> In-Reply-To: <26c67e40-8b90-57f1-de32-e60d1cffe1b9@passap.ru> References: <CALwmBx0zjVpUNK3oYjkzEVxxLkz3FqTOprS4quXvTv-Eu7fBVg@mail.gmail.com> <26c67e40-8b90-57f1-de32-e60d1cffe1b9@passap.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi. Currently I could not test something with ODROID-C1(because I use it as my parent's home VPN router). 1. add boot.ini and fix gpart block size I updated wiki page https://wiki.freebsd.org/action/diff/FreeBSD/arm/Odroid-C1?action=3Ddiff&re= v1=3D9&rev2=3D10 2. growfs I think growfs command is for freebsd partition(mmcsd0s2). So growfs /dev/mmcsd0s2? 3. serial console is need to boot or not? Next September I will try to boot ODROID-C1 without serial console cable, if I have a time. 2017=E5=B9=B48=E6=9C=887=E6=97=A5(=E6=9C=88) 6:19 Boris Samorodov <bsam@pas= sap.ru>: > 04.08.2017 09:15, Yoshiro MIHIRA =D0=BF=D0=B8=D1=88=D0=B5=D1=82: > > > I will add boot.ini information to FreeBSD wiki page(1), if no one repl= y > my > > email until 10/Aug. > > That will be great. > > I have some more questions/fixes to "Steps to prepare SD card". > > 1. There are two commands: > --- > gpart add -t fat16 -b 1134 -s 64M mmcsd0 > gpart add -t freebsd -b 132174 mmcsd0 > --- > > I doubt the second command is precise. 64M is 131072 blocks, > 131072 + 1134 =3D 132206. > > If I use those commands I get the error after the second one: > --- > gpart: autofill: No space left on device > --- > > The value 132206 has a success. So the second command should be: > --- > gpart add -t freebsd -b 132206 mmcsd0 > --- > > 2. Since we prepare the final disk, I'd add a growfs command at the > end of those steps: > --- > growfs /dev/mmcsd0 > --- > > HTH & WBR > -- > bsam > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALwmBx1Vv6_tZFtg7AzmJSBL4-HS8VzyncNo34HbBc_wJf66NQ>