Date: Wed, 18 Jan 2006 15:53:23 +0000 From: Francois Kritzinger <francoisk777@gmail.com> To: Sam Leffler <sam@errno.com> Cc: freebsd-mobile@freebsd.org Subject: Re: DWL-G520 rev. b3 (AR5213 chipset) Message-ID: <3cc1a1cc0601180753s3808a3b0g@mail.gmail.com> In-Reply-To: <3cc1a1cc0601180207l795883e7l@mail.gmail.com> References: <3cc1a1cc0601170605k77dc519cp@mail.gmail.com> <43CD4E26.1000402@errno.com> <3cc1a1cc0601180207l795883e7l@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
No worries, forgot to have a look at those posts of yours you mentioned. Thanks :) On 18/01/06, Francois Kritzinger <francoisk777@gmail.com> wrote: > Cool, but will this patch work against 6.0-RELEASE? > > On 17/01/06, Sam Leffler <sam@errno.com> wrote: > > Francois Kritzinger wrote: > > > Hi > > > > > > Is this card (DWL-G520 rev. b3 with the AR5213 chipset ) supported i= n > > > 6.0 yet? Because it doesn't appear to be: > > > > > > ---------------------------------------------- > > > pciconf -lv: > > > ath0@pci0:6:0: class=3D0x020000 card=3D0x3a131186 chip=3D0x001= 3168c rev=3D0x01 hdr=3D0x00 > > > vendor =3D 'Atheros Communications Inc.' > > > device =3D 'AR5213 802.11a/b/g Wireless Adapter' > > > class =3D network > > > subclass =3D ethernet > > > > > > dmesg: > > > ath0: <Atheros 5212> mem 0xdffe0000-0xdffeffff irq 17 at device 6.0 o= n pci0 > > > ath0: unable to attach hardware; HAL status 13 > > > device_attach: ath0 attach returned 6 > > > ---------------------------------------------- > > > > > > If not, will it be sometime soon? > > > > > > Also, the reason I bought this card was because ath(4) explicitly say= s > > > that the DWL-G520 rev. b works in 5.4 and 6.0, which is a lie in the > > > case of rev. b3, so someone should update this manpage. Of course, > > > this was probably before D-LInk decided to upgrade this card's chipse= t > > > to the AR5213 (the manpage thinks this card has the AR5212 chipset). > > > > There's a hal out for test at www.freebsd.org/~sam; it should handle th= e > > part. See previous postings from me to current@. > > > > Sam > > > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3cc1a1cc0601180753s3808a3b0g>