Date: Tue, 24 Jan 2006 23:13:53 +0900 From: Norikatsu Shigemura <nork@FreeBSD.org> To: Andre Oppermann <andre@FreeBSD.org> Cc: current@FreeBSD.org, net@FreeBSD.org Subject: Re: Marvell/SysKonnect YukonII source code available Message-ID: <20060124231353.c0554f76.nork@FreeBSD.org> In-Reply-To: <43D5FF19.7090903@freebsd.org> References: <43D5FF19.7090903@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 24 Jan 2006 11:19:05 +0100 Andre Oppermann <andre@freebsd.org> wrote: > Marvell/SysKonnect made the source code to the YukonII chips available > today under a BSD license: > http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz > I haven't tested the driver yet and I don't know if it available directly > from the their website already. > Many thanks to Gerald and Frank at SysKonnect for working with us and > making this possible! Good works!! I confirmed it on 6.0R-p2, but I didn't test. # mkdir /usr/src/sys/dev/myk # cd /usr/src/sys/dev/myk # tar xvf mykbsd60x86-8.12.1.3-src.tgz # make clean all : # kldload ./if_myk.ko # dmesg : myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.12.1.3> port 0xa800-0xa8ff mem 0xff720000-0xff723fff irq 17 at device 0.0 on pci4 myk0: Ethernet address: 00:13:20:b4:85:66 # ifconfig myk0 myk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU> ether 00:13:20:b4:85:66 media: Ethernet autoselect status: no carrier
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060124231353.c0554f76.nork>