Date: Tue, 19 Sep 2000 17:55:25 -0500 (CDT) From: BSD <bsd@shell-server.com> To: bugs@freebsd.org, stable@freebsd.org Subject: Constant panics on 4.1-STABLE! Message-ID: <Pine.BSF.4.10.10009181841480.65514-100000@marvin.shell-server.com>
next in thread | raw e-mail | index | archive | help
I'm running 4.1-STABLE on a 700MHz Athlon with a 300W power supply (only recently did I learn that 250W wasn't enough), a single Maxtor 40.9GB hard drive (UDMA/66, 7200RPM), an Abit KA7 motherboard, with normally 768MBs of PC133 RAM (non-ECC). An fxp0 device, and a generic PCI video card. pci0: <Trident model 9660 VGA-compatible display device> at 13.0 irq 10. There's a floppy drive, and a 2-fan hard drive cooling unit that mounts in the front of 5.25" slot which houses the maxtor via mounting brackets. Even though 300W is considered the "minimum" by some for Athlon supplies, I think my minimal hardware should make it a stable option. The multiple panics were in the following sequence: 1) Server is booted with all DIMMs, on a BP6. PANIC. 2) Server is booted with all DIMMS, on a KA7. PANIC. 3) Server is booted with DIMMs #2 and #1. PANIC. 4) Server is booted with DIMM #1. PANIC. 5) Server is booted with DIMM #2. PANIC. 6) Server is booted with DIMM #3. PANIC. Anyone interested in helping me out here, can see the panic messages at the following url. I'll post further panic captures there too, if they happen. Panics 2-6 are listed in sequence on the website. http://24.108.110.119/~eo/panics/ Thanks for any help! Oh, and these panics can be as close as 12 minutes and as far apart as 8 days (not the documented ones, but the ones I have had up to this point, with all 3 DIMMs in place). You can see the uptimes for the documented panics at the bottom of the JPEGs. --Bart To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10009181841480.65514-100000>