Date: Sat, 6 Jan 2007 08:39:32 +1100 (EST) From: Peter Jeremy <peterjeremy@optushome.com.au> To: FreeBSD-gnats-submit@FreeBSD.org Subject: www/107588: AMD64 Motherboard Page Update - HP Compaq nx6125 laptop Message-ID: <200701052139.l05LdWdS011316@turion.vk2pj.dyndns.org> Resent-Message-ID: <200701052220.l05MKPBW037182@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 107588 >Category: www >Synopsis: AMD64 Motherboard Page Update - HP Compaq nx6125 laptop >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Fri Jan 05 22:20:24 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Peter Jeremy >Release: FreeBSD 6.2-PRERELEASE amd64 >Organization: n/a >Environment: System: FreeBSD turion.vk2pj.dyndns.org 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #23: Fri Oct 27 09:36:46 EST 2006 root@turion.vk2pj.dyndns.org:/usr/obj/usr/src/sys/turion amd64 >Description: Manufacturer: HP Model: Compaq nx6125 (EJ884PA#ABG) (discontined but some details available via http://h20331.www2.hp.com/hpsub/cache/328381-0-0-225-121.html ) Chipset/Socket: ATI Technologies Inc BIOS: 68DTT Ver. F.07 Tested FreeBSD Versions: 6.1-RELEASE thru 6.2-PRERELEASE, 7.0-CURRENT Broadcom WLAN works via NDIS (not in following dmesg): ndis0: <Broadcom 802.11g Network Adapter> mem 0xd0010000-0xd0011fff irq 22 at device 2.0 on pci2 ndis0: NDIS API version: 5.1 Firewire probes but untested (and not in following dmesg): fwohci0: <1394 Open Host Controller Interface> mem 0xd0013000-0xd00137ff,0xd0014000-0xd0017fff irq 21 at device 4.2 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:99:29:99:44:0a fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:99:44:0a fwe0: Ethernet address: 02:02:3f:99:44:0a fwe0: if_start running deferred for Giant fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) Bluetooth works: ubt0: Broadcom HP integrated Bluetooth module, rev 1.10/0.17, addr 2 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320 Unsupported devices: WinModem, Flash card-reader, Fingerprint scanner: none1@pci0:20:6: class=0x070300 card=0x308b103c chip=0x43781002 rev=0x02 hdr=0x00 vendor = 'ATI Technologies Inc' class = simple comms subclass = generic modem none5@pci2:4:3: class=0x018000 card=0x308b103c chip=0x8033104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'PCIxx21 Integrated FlashMedia Controller' class = mass storage Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint Sensor(0x2580), vendor 0x08ff(0x08ff), rev 6.21 X.org does not have accelerated support for the ATI Radeon XPRESS 200M 5955. Switching between X and VTYs occasionally produces a corrupt display but closing and opening the lid almost always fixes this. DVD does not appear to work in DMA mode. powerd causes random hard lockups (there is a problem with speed changing under load) Suspend doesn't work (either spins or panics) Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #23: Fri Oct 27 09:36:46 EST 2006 root@turion.vk2pj.dyndns.org:/usr/obj/usr/src/sys/turion ACPI APIC Table: <HP 0944 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 Mobile ML-40 (2194.52-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 939327488 (895 MB) avail memory = 898609152 (856 MB) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.1> irqs 0-23 on motherboard acpi0: <HP 0944> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 acpi0: Power Button (fixed) unknown: I/O range not supported Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 powernow0: <PowerNow! K8> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci16: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci32: <ACPI PCI bus> on pcib3 ohci0: <ATI SB400 USB Controller> mem 0xd0800000-0xd0800fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xd0801000-0xd0801fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> mem 0xd0802000-0xd0802fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3010-0x301f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 0xd0000000-0xd000ffff irq 23 at device 1.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0f:b0:b9:6a:45 pci2: <network> at device 2.0 (no driver attached) cbb0: <PCI-CardBus Bridge> mem 0xd0012000-0xd0012fff irq 20 at device 4.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci2: <serial bus, FireWire> at device 4.2 (no driver attached) pci2: <mass storage> at device 4.3 (no driver attached) pci2: <base peripheral> at device 4.4 (no driver attached) pcm0: <ATI IXP 400> mem 0xd0804000-0xd08040ff irq 17 at device 20.5 on pci0 pci0: <simple comms, generic modem> at device 20.6 (no driver attached) battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2 Timecounter "TSC" frequency 2194517593 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <FUJITSU MHV2080AH 00830096> at ata0-master UDMA100 acd0: DVDR <TSSTcorpCD/DVDW TS-L532M/HR08> at ata1-master PIO4 pcm0: <Conexant CX20468-21 AC97 Codec> bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly. hwpmc: TSC/1/0x20<REA> K8/4/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA> Trying to mount root from ufs:/dev/ad0s2a cd0 at ata1 bus 0 target 0 lun 0 cd0: <TSSTcorp CD/DVDW TS-L532M HR08> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Incompatible medium installed >How-To-Repeat: n/a >Fix: n/a >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200701052139.l05LdWdS011316>