Date: Mon, 13 Mar 2006 11:19:29 -0700 (MST) From: "M. Warner Losh" <imp@bsdimp.com> To: tarkhil@webmail.sub.ru Cc: freebsd-usb@freebsd.org, freebsd-mobile@freebsd.org Subject: Re: USB-to-IDE problem Message-ID: <20060313.111929.29516162.imp@bsdimp.com> In-Reply-To: <4415B5D7.6080401@webmail.sub.ru> References: <4415B5D7.6080401@webmail.sub.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <4415B5D7.6080401@webmail.sub.ru>
Alex Povolotsky <tarkhil@webmail.sub.ru> writes:
: Hello!
:
: I've bought NEC DVD/CD-RW drive and some cheap aluminium external USB
: 2.0 case, put them together and prepared to be happy.
:
: It wrote to disks without a problem, but next day it failed 5 times of
: 5. I've connected it to annother FreeBSD box (server this time), and it
: works.
:
: On both computer, kernel issues warnings
:
: Mar 13 21:01:26 tarkhil kernel: umass0: Unsupported ATAPI command 0x46
:
: but it doesn't seem to have much value.
:
: Kernel identifies the drive as
:
: Mar 13 21:00:01 tarkhil kernel: umass0: Genesys Logic USB TO IDE, rev
: 2.00/0.33, addr 2
: Mar 13 21:00:01 tarkhil root: Unknown device: uhub3
: Mar 13 21:00:01 tarkhil root: Attached: umass0
: Mar 13 21:00:04 tarkhil kernel: cd0 at umass-sim0 bus 0 target 0 lun 0
: Mar 13 21:00:04 tarkhil kernel: cd0: <_NEC CDRW/DVD CB1100B NS00>
: Removable CD-ROM SCSI-0 device
: Mar 13 21:00:04 tarkhil kernel: cd0: 1.000MB/s transfers
:
: However, on server identification is slightly different
:
: Mar 13 20:40:57 tarkhil-test2 kernel: umass0: vendor 0x05e3 USB TO IDE,
: rev 2.00/0.33, addr 2
: Mar 13 20:41:06 tarkhil-test2 kernel: cd0 at umass-sim0 bus 0 target 0 lun 0
: Mar 13 20:41:06 tarkhil-test2 kernel: cd0: <_NEC CDRW/DVD CB1100B NS00>
: Removable CD-ROM SCSI-0 device
: Mar 13 20:41:06 tarkhil-test2 kernel: cd0: 40.000MB/s transfers
:
: So, on notebook every attempt to write disk sooner or later results in
: Track 01: 35 of 331 MB written (fifo 100%) [buf 99%]
: 10.2x.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
: CDB: 2A 00 00 00 46 3C 00 00 1F 00
: status: 0x0 (GOOD STATUS)
: resid: 63488
: cmd finished after 0.041s timeout 40s
:
: write track data: error after 36823040 bytes
: cdrecord: A write error occured.
: cdrecord: Please properly read the error message above.
: cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
: CDB: 00 00 00 00 00 00
: status: 0x0 (GOOD STATUS)
: cmd finished after 45.003s timeout 40s
: cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
: CDB: 35 00 00 00 00 00 00 00 00 00
: status: 0x0 (GOOD STATUS)
: cmd finished after 250.003s timeout 120s
: Trouble flushing the cache
:
:
: usbdevs -v shows
:
: Controller /dev/usb3:
: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
: NEC(0x0000), rev 1.00
: port 1 powered
: port 2 addr 2: high speed, self powered, config 1, USB TO IDE(0x0701),
: Genesys Logic(0x05e3), rev 0.33
:
: USB controller is cardbus
:
: Mar 13 20:29:02 tarkhil kernel: ohci1: <NEC uPD 9210 USB controller> mem
: 0x88001000-0x88001fff irq 11 at device 0.1 on cardbus1
: Mar 13 20:29:02 tarkhil kernel: ohci1: [GIANT-LOCKED]
: Mar 13 20:29:02 tarkhil kernel: usb2: OHCI version 1.0
: Mar 13 20:29:02 tarkhil kernel: usb2: <NEC uPD 9210 USB controller> on ohci1
: Mar 13 20:29:02 tarkhil kernel: usb2: USB revision 1.0
: Mar 13 20:29:02 tarkhil kernel: uhub2: NEC OHCI root hub, class 9/0, rev
: 1.00/1.00, addr 1
: Mar 13 20:29:02 tarkhil kernel: uhub2: 2 ports with 2 removable, self
: powered
: Mar 13 20:29:02 tarkhil kernel: cardbus1: Resource not specified in CIS:
: id=10,
: size=100
: Mar 13 20:29:02 tarkhil kernel: ehci0: <NEC uPD 720100 USB 2.0
: controller> mem 0x88002000-0x880020ff irq 11 at device 0.2 on cardbus1
: Mar 13 20:29:02 tarkhil kernel: ehci0: [GIANT-LOCKED]
: Mar 13 20:29:02 tarkhil kernel: ehci_pci_attach: companion usb1
: Mar 13 20:29:02 tarkhil kernel: ehci_pci_attach: companion usb2
: Mar 13 20:29:02 tarkhil kernel: usb3: EHCI version 1.0
: Mar 13 20:29:02 tarkhil kernel: usb3: companion controllers, 3 ports
: each: usb1
: usb2
: Mar 13 20:29:02 tarkhil kernel: usb3: <NEC uPD 720100 USB 2.0
: controller> on ehci0
: Mar 13 20:29:02 tarkhil kernel: usb3: USB revision 2.0
: Mar 13 20:29:02 tarkhil kernel: uhub3: NEC EHCI root hub, class 9/0, rev
: 2.00/1.00, addr 1
: Mar 13 20:29:02 tarkhil kernel: uhub3: 5 ports with 5 removable, self
: powered
:
: Notebook is 5.3-RELEASE, server is 6.0-RELEASE. Maybe I should upgrade
: noteook to 6.0?
6.1 will have a bunch of improvements in this area.
Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060313.111929.29516162.imp>