Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Jun 2004 12:35:18 -0400
From:      Bill Moran <wmoran@potentialtech.com>
To:        kaging@access4less.net
Cc:        questions@freebsd.org
Subject:   Re: Hard Drive going bad? (hard error reading fsbn)
Message-ID:  <20040614123518.7c0802c5.wmoran@potentialtech.com>
In-Reply-To: <40cd9c6f.25d.45d3.1305745607@access4less.net>
References:  <40cd9c6f.25d.45d3.1305745607@access4less.net>

next in thread | previous in thread | raw e-mail | index | archive | help
"Kevin Greenidge" <kaging@access4less.net> wrote:

Has it been doing this since you installed?  Or was it working before?

Looks like a failed HDD from here.

> Here is the /etc/fstab and my dmesg output:
> 
> # Device		Mountpoint	FStype	Options		Dump	Pass#
> /dev/ad0s1b		none		swap	sw		0	0
> /dev/ad0s1a		/		ufs	rw		1	1
> /dev/ad0s1f		/home		ufs	rw,userquota,groupquota	2	2
> /dev/ad0s1g		/tmp		ufs	rw,noexec,nosuid		2	2
> /dev/ad0s1e		/usr		ufs	rw		2	2
> /dev/ad0s1h		/var		ufs	rw,userquota,groupquota	2	2
> /dev/acd0c		/cdrom		cd9660	ro,noauto	0	0
> proc			/proc		procfs	rw		0	0
> 
> -----------------------------
> 
> 2.2 irq 5
> pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at
> device 8.0 on pci0
> pci1: <PCI bus> on pcib1
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem
> 0xe5000000-0xe50fffff,0xe5110000-0xe5110fff irq 11 at device
> 6.0 on pci1
> fxp0: Ethernet address 00:90:27:a9:71:66
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> auto
> pci1: <SiS 6326 SVGA controller> at 9.0 irq 12
> atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f at
> device 9.0 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pcib2: <PCI to PCI bridge (vendor=10de device=01e8)> at
> device 30.0 on pci0
> pci2: <PCI bus> on pcib2
> orm0: <Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6
> drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
> isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> plip0: <PLIP network interface> on ppbus0
> IP Filter: v3.4.31 initialized.  Default = pass all, Logging
> = enabled
> ata1-slave: ATA identify retries exceeded
> ad0: 88350MB <IC35L090AVV207-0> [179505/16/63] at
> ata0-master BIOSDMA
> acd0: CDROM <Compaq CRD-8322B> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a
> ad0s1h: hard error reading fsbn 197442815 of
> 26369632-26369887 (ad0s1 bn 197442815; cn 12290 tn 62 sn 59)
> trying PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0: DMA problem fallback to PIO mode
> ad0s1h: hard error reading fsbn 197442991 of
> 26369632-26369887 (ad0s1 bn 197442991; cn 12290 tn 65 sn 46)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443023 of
> 26369664-26369887 (ad0s1 bn 197443023; cn 12290 tn 66 sn 15)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443055 of
> 26369696-26369887 (ad0s1 bn 197443055; cn 12290 tn 66 sn 47)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443087 of
> 26369728-26369887 (ad0s1 bn 197443087; cn 12290 tn 67 sn 16)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443119 of
> 26369760-26369887 (ad0s1 bn 197443119; cn 12290 tn 67 sn 48)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443151 of
> 26369792-26369887 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443151 of
> 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443151 of
> 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443151 of
> 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17)
> status=59 error=40
> ad0s1h: hard error reading fsbn 197443151 of
> 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17)
> status=59 error=40

-- 
Bill Moran
Potential Technologies
http://www.potentialtech.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040614123518.7c0802c5.wmoran>