Date: Tue, 24 Jan 2006 15:54:14 +0100 From: =?windows-1252?Q?Uro=9A_Gruber?= <uros.gruber@sir-mag.com> To: Norikatsu Shigemura <nork@FreeBSD.org>, Andre Oppermann <andre@FreeBSD.org> Cc: current@FreeBSD.org, net@FreeBSD.org Subject: Re: Marvell/SysKonnect YukonII source code available Message-ID: <43D63F96.1050908@sir-mag.com> In-Reply-To: <20060124231353.c0554f76.nork@FreeBSD.org> References: <43D5FF19.7090903@freebsd.org> <20060124231353.c0554f76.nork@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Norikatsu Shigemura wrote: > On Tue, 24 Jan 2006 11:19:05 +0100 > Andre Oppermann <andre@freebsd.org> wrote: > >> Marvell/SysKonnect made the source code to the YukonII chips available >> today under a BSD license: >> http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz >> I haven't tested the driver yet and I don't know if it available directly >> from the their website already. >> Many thanks to Gerald and Frank at SysKonnect for working with us and >> making this possible! >> > > Good works!! I confirmed it on 6.0R-p2, but I didn't test. > > # mkdir /usr/src/sys/dev/myk > # cd /usr/src/sys/dev/myk > # tar xvf mykbsd60x86-8.12.1.3-src.tgz > # make clean all > : > # kldload ./if_myk.ko > # dmesg > : > myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.12.1.3> port 0xa800-0xa8ff mem 0xff720000-0xff723fff irq 17 at device 0.0 on pci4 > myk0: Ethernet address: 00:13:20:b4:85:66 > # ifconfig myk0 > myk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU> > ether 00:13:20:b4:85:66 > media: Ethernet autoselect > status: no carrier > 5.4-RELEASE-p8 I get this sky2.c: In function `Yk2IntServiceRoutine': sky2.c:1478: warning: dereferencing `void *' pointer sky2.c:1478: error: request for member `Arpcom' in something not a structure or union *** Error code 1 Stop in /usr/src/sys/dev/myk. regards Uros > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43D63F96.1050908>