Date: Mon, 21 Jul 2003 22:00:24 +0900 From: KATO Tsuguru <tkato@prontomail.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: ports/54707: Update port: print/ghostscript-afpl Message-ID: <20030721220024.66c17f2b.tkato@prontomail.com> Resent-Message-ID: <200307211310.h6LDAM6L020346@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 54707
>Category: ports
>Synopsis: Update port: print/ghostscript-afpl
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-ports-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Mon Jul 21 06:10:18 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: KATO Tsuguru
>Release: FreeBSD 4.8-RELEASE i386
>Organization:
>Environment:
>Description:
- Take measures to cope with too frequent update (without version numbering)
of Samsung-SmartGDI driver
- Remove needless @'s before ECHO_MSG
>How-To-Repeat:
>Fix:
diff -urN /usr/ports/print/ghostscript-afpl/Makefile print/ghostscript-afpl/Makefile
--- /usr/ports/print/ghostscript-afpl/Makefile Mon Jul 21 21:44:17 2003
+++ print/ghostscript-afpl/Makefile Mon Jul 21 21:45:54 2003
@@ -7,7 +7,7 @@
PORTNAME= ghostscript
PORTVERSION= ${GS_VERSION}
-PORTREVISION= 1
+PORTREVISION= 2
PORTEPOCH= 1
CATEGORIES= print
MASTER_SITES= ${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs,gs_fonts,bjc250/} \
@@ -199,7 +199,7 @@
# GDI - additional driver for Samsung SmartGDI laser printers
GDI= gdi
GDI_NAME= Samsung-SmartGDI-all-GS
-GDI_SRCS= ${GDI_NAME}.tar.gz
+GDI_SRCS= ${GDI_NAME}.orig.tar.gz
# LXM3200 - additional driver for Lexmark 3200/Z12/Z22/Z31/Z32
LXM3200= lxm3200
@@ -226,77 +226,77 @@
pre-everything::
.if !defined(A4)
- @${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation."
+ ${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation."
.else
- @${ECHO_MSG} "Using -DA4 for compilation."
+ ${ECHO_MSG} "Using -DA4 for compilation."
.endif
post-extract:
- @${ECHO_MSG} ">>> in post-extract ..."
+ ${ECHO_MSG} ">>> in post-extract ..."
# ** 3rd party driver **
# Note: don't forget to add those devices in scripts/configure and
# configure.batch, which update unix-gcc.mak to build gs with these
# new devices !
#
# for HP2200 driver
- @${ECHO_MSG} ">>> extracting ${HP2200_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${HP2200_SRCS} ..."
${MKDIR} ${WRKSRC}/${HP2200}
${TAR} -C ${WRKSRC}/${HP2200} -xzf ${DISTDIR}/${DIST_SUBDIR}/${HP2200_SRCS}
# for DJ970 driver
- @${ECHO_MSG} ">>> extracting ${DJ970_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${DJ970_SRCS} ..."
${CP} ${DISTDIR}/${DIST_SUBDIR}/${DJ970_SRCS} ${WRKSRC}/src
${GUNZIP_CMD} ${WRKSRC}/src/${DJ970_SRCS}
# for MD2K driver
- @${ECHO_MSG} ">>> extracting ${MD2K_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${MD2K_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${MD2K_SRCS}
${LN} -sf ${MD2K_NAME} ${WRKSRC}/${MD2K}
# for ALPS driver
- @${ECHO_MSG} ">>> extracting ${ALPS_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${ALPS_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${ALPS_SRCS}
${LN} -sf ${ALPS_NAME} ${WRKSRC}/${ALPS}
# for BJ10V driver
- @${ECHO_MSG} ">>> extracting ${BJ10V_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${BJ10V_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${BJ10V_SRCS}
# for BJC250 driver
- @${ECHO_MSG} ">>> extracting ${BJC250_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${BJC250_SRCS} ..."
${MKDIR} ${WRKSRC}/${BJC250_NAME}/src
${GZCAT} ${DISTDIR}/${DIST_SUBDIR}/${BJC250_SRCS} | \
${PATCH} -d ${WRKSRC}/${BJC250_NAME} -f -s -N -E -p1 \
2>/dev/null || ${TRUE}
${LN} -sf ${BJC250_NAME} ${WRKSRC}/${BJC250}
# for CPCA driver
- @${ECHO_MSG} ">>> extracting ${CPCA_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${CPCA_SRCS} ..."
${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${CPCA_SRCS}
# for LIPS driver
- @${ECHO_MSG} ">>> extracting ${LIPS_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${LIPS_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${LIPS_SRCS}
${LN} -sf ${LIPS_NAME} ${WRKSRC}/${LIPS}
# for DMPRT driver
- @${ECHO_MSG} ">>> extracting ${DMPRT_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${DMPRT_SRCS} ..."
${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${DMPRT_SRCS}
# for EPAG driver
- @${ECHO_MSG} ">>> extracting ${EPAG_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${EPAG_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS}
# for EPLASER driver
- @${ECHO_MSG} ">>> extracting ${EPLASER_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${EPLASER_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPLASER_SRCS}
${LN} -sf ${EPLASER_NAME} ${WRKSRC}/${EPLASER}
# for MJC driver
- @${ECHO_MSG} ">>> extracting ${MJC_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${MJC_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${MJC_SRCS}
${LN} -sf ${MJC_NAME} ${WRKSRC}/${MJC}
# for GDI driver
- @${ECHO_MSG} ">>> extracting ${GDI_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${GDI_SRCS} ..."
${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${GDI_SRCS}
# for LXM3200 driver
- @${ECHO_MSG} ">>> extracting ${LXM3200_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${LXM3200_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${LXM3200_SRCS}
${LN} -sf ${LXM3200_NAME} ${WRKSRC}/${LXM3200}
# for LX5000 driver
- @${ECHO_MSG} ">>> extracting ${LX5000_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${LX5000_SRCS} ..."
${CP} ${DISTDIR}/${DIST_SUBDIR}/${LX5000_SRCS} ${WRKSRC}/src
# for LEX7000 driver
- @${ECHO_MSG} ">>> extracting ${LEX7000_SRCS} ..."
+ ${ECHO_MSG} ">>> extracting ${LEX7000_SRCS} ..."
${MKDIR} ${WRKSRC}/${LEX7000}
${CAT} ${DISTDIR}/${DIST_SUBDIR}/${LEX7000_SRCS} | \
${PATCH} -d ${WRKSRC}/${LEX7000} -f -s -N -E -p1 \
@@ -317,152 +317,152 @@
# here we apply the modifications necessary to build the 3rd party drivers
# advantage: you see unmodified makefiles after a pure make extract
pre-configure:
- @${ECHO_MSG} ">>> in pre-configure ..."
+ ${ECHO_MSG} ">>> in pre-configure ..."
# for HP2200 driver
- @${ECHO_MSG} ">>> adding ${HP2200} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${HP2200} driver to contrib.mak ..."
${CAT} ${FILESDIR}/chp2200.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for DJ970 driver
- @${ECHO_MSG} ">>> adding ${DJ970} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${DJ970} driver to contrib.mak ..."
${CAT} ${FILESDIR}/dj970.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for MD2K driver
- @${ECHO_MSG} ">>> adding ${MD2K} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${MD2K} driver to contrib.mak ..."
${CAT} ${WRKSRC}/${MD2K_NAME}/gdevmd2k.mak-5.50 \
>> ${WRKSRC}/src/contrib.mak
# for ALPS driver
- @${ECHO_MSG} ">>> adding ${ALPS} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${ALPS} driver to contrib.mak ..."
${CAT} ${WRKSRC}/${ALPS_NAME}/gdevalps.mak-5.50 \
>> ${WRKSRC}/src/contrib.mak
# for BJ10V driver
- @${ECHO_MSG} ">>> adding ${BJ10V} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${BJ10V} driver to contrib.mak ..."
${CAT} ${WRKSRC}/${BJ10V_NAME}/gdev10v.mak \
>> ${WRKSRC}/src/contrib.mak
# for BJC250 driver
- @${ECHO_MSG} ">>> adding ${BJC250} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${BJC250} driver to contrib.mak ..."
${CAT} ${FILESDIR}/bjc250.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for CPCA driver
- @${ECHO_MSG} ">>> adding ${CPCA} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${CPCA} driver to contrib.mak ..."
${CAT} ${WRKSRC}/src/cpca_gdev.mak \
>> ${WRKSRC}/src/contrib.mak
# for LIPS driver
- @${ECHO_MSG} ">>> adding ${LIPS} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${LIPS} driver to contrib.mak ..."
${CAT} ${WRKSRC}/${LIPS_NAME}/gdevlips.mak \
>> ${WRKSRC}/src/contrib.mak
# for DMPRT driver
- @${ECHO_MSG} ">>> adding ${DMPRT} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${DMPRT} driver to contrib.mak ..."
${CAT} ${WRKSRC}/src/gdevdmpr.mak \
>> ${WRKSRC}/src/contrib.mak
# for EPAG driver
- @${ECHO_MSG} ">>> adding ${EPAG} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${EPAG} driver to contrib.mak ..."
${CAT} ${FILESDIR}/epag.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for EPLASER driver
- @${ECHO_MSG} ">>> adding ${EPLASER} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${EPLASER} driver to contrib.mak ..."
${CAT} ${WRKSRC}/${EPLASER_NAME}/gdevescv6.mak \
>> ${WRKSRC}/src/contrib.mak
${CAT} ${WRKSRC}/${EPLASER_NAME}/gdevesmv6.mak \
>> ${WRKSRC}/src/contrib.mak
# for MJC driver
- @${ECHO_MSG} ">>> adding ${MJC} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${MJC} driver to contrib.mak ..."
${CAT} ${WRKSRC}/${MJC_NAME}/gdevmjc.mak \
>> ${WRKSRC}/src/contrib.mak
# for GDI driver
- @${ECHO_MSG} ">>> adding ${GDI} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${GDI} driver to contrib.mak ..."
${CAT} ${WRKSRC}/src/smartgdi-contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for LXM3200 driver
- @${ECHO_MSG} ">>> adding ${LXM3200} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${LXM3200} driver to contrib.mak ..."
${CAT} ${FILESDIR}/lxm3200.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for LX5000 driver
- @${ECHO_MSG} ">>> adding ${LX5000} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${LX5000} driver to contrib.mak ..."
${CAT} ${FILESDIR}/lx5000.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for LEX7000 driver
- @${ECHO_MSG} ">>> adding ${LEX7000} driver to contrib.mak ..."
+ ${ECHO_MSG} ">>> adding ${LEX7000} driver to contrib.mak ..."
${CAT} ${FILESDIR}/lex7000.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
pre-build:
- @${ECHO_MSG} ">>> in pre-build ..."
- @${ECHO_MSG} ">>> creating directories for compilation ..."
+ ${ECHO_MSG} ">>> in pre-build ..."
+ ${ECHO_MSG} ">>> creating directories for compilation ..."
${MKDIR} ${WRKSRC}/obj
${MKDIR} ${WRKSRC}/bin
# for HP2200 driver
- @${ECHO_MSG} ">>> creating symlinks for ${HP2200} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${HP2200} ..."
.for i in gdevcd8.c
${LN} -sf ${WRKSRC}/${HP2200}/${i} ${WRKSRC}/src
.endfor
# for MD2K driver
- @${ECHO_MSG} ">>> creating symlinks for ${MD2K} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${MD2K} ..."
.for i in gdevmd2k.c
${LN} -sf ${WRKSRC}/${MD2K_NAME}/${i} ${WRKSRC}/src
.endfor
# for ALPS driver
- @${ECHO_MSG} ">>> creating symlinks for ${ALPS} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${ALPS} ..."
.for i in gdevalps.c
${LN} -sf ${WRKSRC}/${ALPS_NAME}/${i} ${WRKSRC}/src
.endfor
# for BJ10V driver
- @${ECHO_MSG} ">>> creating symlinks for ${BJ10V} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${BJ10V} ..."
.for i in gdev10v.c
${LN} -sf ${WRKSRC}/${BJ10V_NAME}/${i} ${WRKSRC}/src
.endfor
# for BJC250 driver
- @${ECHO_MSG} ">>> creating symlinks for ${BJC250} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${BJC250} ..."
.for i in gdevbjc_.[ch] gdevbjca.c
${LN} -sf ${WRKSRC}/${BJC250_NAME}/src/${i} ${WRKSRC}/src
.endfor
# for LIPS driver
- @${ECHO_MSG} ">>> creating symlinks for ${LIPS} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${LIPS} ..."
.for i in gdevlips.[ch] gdevlprn.[ch] gdevl4r.c gdevl4v.c gdevespg.c \
gdevnpdl.c gdevrpdl.c
${LN} -sf ${WRKSRC}/${LIPS_NAME}/${i} ${WRKSRC}/src
.endfor
# for EPAG driver
- @${ECHO_MSG} ">>> building ${EPAG} utility ..."
+ ${ECHO_MSG} ">>> building ${EPAG} utility ..."
cd ${WRKSRC}/${EPAG_NAME} ; \
${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile
- @${ECHO_MSG} ">>> creating symlinks for ${EPAG} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${EPAG} ..."
.for i in gdevepag.c
${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src
.endfor
# for EPLASER driver
- @${ECHO_MSG} ">>> creating symlinks for ${EPLASER} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${EPLASER} ..."
.for i in gdevescv.[ch] gdevesmv.c
${LN} -sf ${WRKSRC}/${EPLASER_NAME}/${i} ${WRKSRC}/src
.endfor
# for MJC driver
- @${ECHO_MSG} ">>> creating symlinks for ${MJC} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${MJC} ..."
.for i in gdevmjc.c mjbarrie.c mjbksep.c mjespdtc.c mjespdtm.c mjespdty.c \
mjgrnsp.c mjgrnsp2.c mjhtocmy.c mjmtx2.c mjvtbl.c
${LN} -sf ${WRKSRC}/${MJC_NAME}/${i} ${WRKSRC}/src
.endfor
# for LXM3200 driver
- @${ECHO_MSG} ">>> creating symlinks for ${LXM3200} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${LXM3200} ..."
.for i in gdevlx32.c
${LN} -sf ${WRKSRC}/${LXM3200_NAME}/${i} ${WRKSRC}/src
.endfor
# for LEX7000 driver
- @${ECHO_MSG} ">>> creating symlinks for ${LEX7000} ..."
+ ${ECHO_MSG} ">>> creating symlinks for ${LEX7000} ..."
.for i in gdevlx7.c
${LN} -sf ${WRKSRC}/${LEX7000}/src/${i} ${WRKSRC}/src
.endfor
pre-install:
- @${ECHO_MSG} ">>> in pre-install ..."
- @${ECHO_MSG} ">>> creating ghostscript destdir ..."
+ ${ECHO_MSG} ">>> in pre-install ..."
+ ${ECHO_MSG} ">>> creating ghostscript destdir ..."
${MKDIR} ${DATADIR}
- @${ECHO_MSG} ">>> extracting ghostscript fonts ..."
+ ${ECHO_MSG} ">>> extracting ghostscript fonts ..."
${TAR} -C ${DATADIR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GS_FONTS_STD}
${TAR} -C ${DATADIR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GS_FONTS_OTHER}
${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR}
post-install:
- @${ECHO_MSG} ">>> in post-install ..."
- @${ECHO_MSG} ">>> stripping gs ..."
+ ${ECHO_MSG} ">>> in post-install ..."
+ ${ECHO_MSG} ">>> stripping gs ..."
.if defined(WITH_SHLIB)
${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx
${LN} -sf gsc ${PREFIX}/bin/gs
@@ -470,16 +470,16 @@
${STRIP_CMD} ${PREFIX}/bin/gs
.endif
# for DMPRT driver
- @${ECHO_MSG} ">>> installing ${DMPRT} resources ..."
+ ${ECHO_MSG} ">>> installing ${DMPRT} resources ..."
.for i in dmp_init.ps dmp_site.ps escp_24.src
${INSTALL_DATA} ${WRKSRC}/src/${i} \
${DATADIR}/${GS_VERSION}/lib
.endfor
# for EPAG driver
- @${ECHO_MSG} ">>> installing ${EPAG} utility in bindir ..."
+ ${ECHO_MSG} ">>> installing ${EPAG} utility in bindir ..."
${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin
# contributed UPP driver
- @${ECHO_MSG} ">>> installing contributed UPP profiles ..."
+ ${ECHO_MSG} ">>> installing contributed UPP profiles ..."
.for i in ${CONTRIB_UPP}
${INSTALL_DATA} ${FILESDIR}/${i} \
${DATADIR}/${GS_VERSION}/lib
@@ -488,45 +488,45 @@
# now NOPORTDOCS dependend stuff
#
.if !defined(NOPORTDOCS)
- @${ECHO_MSG} ">>> installing PORTDOC stuff ..."
+ ${ECHO_MSG} ">>> installing PORTDOC stuff ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}
# for MD2K driver
- @${ECHO_MSG} ">>> installing ${MD2K} docs ..."
+ ${ECHO_MSG} ">>> installing ${MD2K} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${MD2K}
.for i in README.jis
${INSTALL_DATA} ${WRKSRC}/${MD2K_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${MD2K}
.endfor
# for ALPS driver
- @${ECHO_MSG} ">>> installing ${ALPS} docs ..."
+ ${ECHO_MSG} ">>> installing ${ALPS} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${ALPS}
.for i in README.gdevalps
${INSTALL_DATA} ${WRKSRC}/${ALPS_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${ALPS}
.endfor
# for BJ10V driver
- @${ECHO_MSG} ">>> installing ${BJ10V} docs ..."
+ ${ECHO_MSG} ">>> installing ${BJ10V} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${BJ10V}
.for i in gdev10v.jis
${INSTALL_DATA} ${WRKSRC}/${BJ10V_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${BJ10V}
.endfor
# for LIPS driver
- @${ECHO_MSG} ">>> installing ${LIPS} docs ..."
+ ${ECHO_MSG} ">>> installing ${LIPS} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${LIPS}
.for i in Gdevlips.htm
${INSTALL_DATA} ${WRKSRC}/${LIPS_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${LIPS}
.endfor
# for DMPRT driver
- @${ECHO_MSG} ">>> installing ${DMPRT} docs ..."
+ ${ECHO_MSG} ">>> installing ${DMPRT} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${DMPRT}
.for i in gdevdmpr.sj
${INSTALL_DATA} ${WRKSRC}/src/${i} \
${DOCSDIR}/${GS_VERSION}/${DMPRT}
.endfor
# for EPAG driver
- @${ECHO_MSG} ">>> installing ${EPAG} docs ..."
+ ${ECHO_MSG} ">>> installing ${EPAG} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG}
.for i in ert.txt gdevepag.txt ChangeLog
${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \
@@ -537,35 +537,35 @@
${DOCSDIR}/${GS_VERSION}/${EPAG}
.endfor
# for EPLASER driver
- @${ECHO_MSG} ">>> installing ${EPLASER} docs ..."
+ ${ECHO_MSG} ">>> installing ${EPLASER} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPLASER}
.for i in readme-eplaser-652.euc readme-eplaser-652-jp.euc
${INSTALL_DATA} ${WRKSRC}/${EPLASER_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${EPLASER}
.endfor
# for MJC driver
- @${ECHO_MSG} ">>> installing ${MJC} docs ..."
+ ${ECHO_MSG} ">>> installing ${MJC} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${MJC}
.for i in MJ700V2C.FAQ README.mjc README.mje README.noz cpem.doc
${INSTALL_DATA} ${WRKSRC}/${MJC_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${MJC}
.endfor
# for GDI driver
- @${ECHO_MSG} ">>> installing ${GDI} docs ..."
+ ${ECHO_MSG} ">>> installing ${GDI} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${GDI}
.for i in README
${INSTALL_DATA} ${WRKSRC}/src/${i} \
${DOCSDIR}/${GS_VERSION}/${GDI}
.endfor
# for LXM3200 driver
- @${ECHO_MSG} ">>> installing ${LXM3200} docs ..."
+ ${ECHO_MSG} ">>> installing ${LXM3200} docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${LXM3200}
.for i in README RELEASE_NOTES Z12-Z31-QuickSetup
${INSTALL_DATA} ${WRKSRC}/${LXM3200_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${LXM3200}
.endfor
.endif
- @${ECHO_MSG} "> post-installation tasks completed."
+ ${ECHO_MSG} "> post-installation tasks completed."
.include "Makefile.inc"
.include <bsd.port.post.mk>
diff -urN /usr/ports/print/ghostscript-afpl/distinfo print/ghostscript-afpl/distinfo
--- /usr/ports/print/ghostscript-afpl/distinfo Mon Jul 21 21:44:17 2003
+++ print/ghostscript-afpl/distinfo Mon Jul 21 13:25:50 2003
@@ -13,8 +13,7 @@
MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3
MD5 (ghostscript/eplaser-3.0.6-652.tgz) = a575b9f3424d0a9ab6fbb5619429a8fd
MD5 (ghostscript/gdevmjc-0.8.tar.gz) = 228f41c3cccce22c8f477c7a9407527c
-MD5 (ghostscript/Samsung-SmartGDI-all-GS.tar.gz) = 806c486599f91aef46270fde5504bc6f
+MD5 (ghostscript/Samsung-SmartGDI-all-GS.orig.tar.gz) = 61decc4e00a64271948cbb581876352b
MD5 (ghostscript/lxm3200-tweaked-20030501.tar.gz) = 0f88082030c6eb66a95804a6cc9b9e6b
MD5 (ghostscript/gdevlx50.c) = 081e355c866316a56fbbff5b59f2b7cf
MD5 (ghostscript/gs6.0.lexmark7000.patch) = fd5018c18351bf64805fe5727be196de
-MD5 (ghostscript/Samsung-SmartGDI-all-GS.tar.gz) = e6963f6c9460a964fe57d38479bbdd41
diff -urN /usr/ports/print/ghostscript-afpl/files/patch-src:gdevgdi.c print/ghostscript-afpl/files/patch-src:gdevgdi.c
--- /usr/ports/print/ghostscript-afpl/files/patch-src:gdevgdi.c Sat Jan 4 04:35:07 2003
+++ print/ghostscript-afpl/files/patch-src:gdevgdi.c Mon Jul 21 13:45:13 2003
@@ -1,15 +1,983 @@
--- src/gdevgdi.c.orig Wed Jun 19 19:32:49 2002
-+++ src/gdevgdi.c Sun Nov 10 22:37:00 2002
-@@ -86,9 +86,9 @@
++++ src/gdevgdi.c Mon Jul 21 13:44:41 2003
+@@ -60,8 +60,8 @@
+ #define GDI_REPEAT_LENGTH 2
+ #define GDI_BAND_HEIGHT 128
+ #define GDI_MAX_BAND 66
+-//#define GDI_BAND_WIDTH 4928
+-//#define GDI_BAND_WIDTH_BYTES (((GDI_BAND_WIDTH + 31)/32)*4)
++/*#define GDI_BAND_WIDTH 4928*/
++/*#define GDI_BAND_WIDTH_BYTES (((GDI_BAND_WIDTH + 31)/32)*4)*/
+
+ #define GDI_PRE_COMP 2
+ #define GDI_REAL_COMP 0
+@@ -74,8 +74,8 @@
+
+ #define GDI_MARGINS_A4 0.167, 0.167, 0.167, 0.167
+ #define GDI_MARGINS_LETTER 0.167, 0.167, 0.167, 0.167
+-//#define GDI_MARGINS_A4 0.0, 0.0, 0.0, 0.0
+-//#define GDI_MARGINS_LETTER 0.0, 0.0, 0.0, 0.0
++/*#define GDI_MARGINS_A4 0.0, 0.0, 0.0, 0.0*/
++/*#define GDI_MARGINS_LETTER 0.0, 0.0, 0.0, 0.0*/
+
+ /* The number of blank lines that make it worthwhile to reposition */
+ /* the cursor. */
+@@ -86,9 +86,15 @@
int GDI_BAND_WIDTH[] = {4768, 4928};
--private int gdi_print_page(P2(gx_device_printer *pdev, FILE *prn_stream));
--private int gdi_open(P1(gx_device *pdev));
--private int gdi_close(P1(gx_device *pdev));
++#if GS_VERSION_MAJOR >= 8
+private int gdi_print_page(gx_device_printer *pdev, FILE *prn_stream);
+private int gdi_open(gx_device *pdev);
+private int gdi_close(gx_device *pdev);
++#else
+ private int gdi_print_page(P2(gx_device_printer *pdev, FILE *prn_stream));
+ private int gdi_open(P1(gx_device *pdev));
+ private int gdi_close(P1(gx_device *pdev));
++#endif
/* The device descriptors */
private dev_proc_open_device(gdi_open);
+@@ -107,6 +113,14 @@
+ 1, /* color bit */
+ gdi_print_page);
+
++gx_device_printer far_data gs_samsunggdi_device =
++ prn_device(prn_gdi_procs, "samsunggdi",
++ DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS, /* paper size (unit : 10/72 inch size) */
++ X_DPI2, Y_DPI2,
++ 0.20, 0.25, 0.25, 0.25, /* margins filled in by gdi_open */
++ 1, /* color bit */
++ gdi_print_page);
++
+ private FILE *WritePJLHeaderData(gx_device_printer *pdev, FILE *fp);
+ private FILE *WriteBandHeader(FILE *fp, unsigned int usBandNo,
+ unsigned char ubCompMode, unsigned int usBandWidth,
+@@ -220,7 +234,7 @@
+ memset(obp, 0x00, ul_band_size*13/10);
+ for (j=0; j<band_height; j++) {
+ memset(tmp, 0x00, raster);
+- //code = gdev_prn_copy_scan_lines(pdev, i*band_height+j,
++ /*code = gdev_prn_copy_scan_lines(pdev, i*band_height+j, */
+ if (y == num_rows) break;
+ code = gdev_prn_copy_scan_lines(pdev, y++,
+ (byte*)tmp, raster);
+@@ -232,15 +246,71 @@
+
+ /* Write Band Data
+ Because of Scanline compression, extract Scanline compression mode */
+- //ul_tiff_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);
+- //ul_scan_size = (unsigned long)bmp2run(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);
+- //ul_min_size = (ul_scan_size > ul_tiff_size) ? ul_tiff_size : ul_scan_size;
++ /*ul_tiff_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);*/
++ /*ul_scan_size = (unsigned long)bmp2run(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);*/
++ /*ul_min_size = (ul_scan_size > ul_tiff_size) ? ul_tiff_size : ul_scan_size;*/
+ ul_min_size = ul_tiff_size;
+ compression_type = GDI_COMP_MODITIFF;
+- //compression_type = (ul_scan_size > ul_tiff_size) ? GDI_COMP_MODITIFF : GDI_COMP_SCANLINE;
++ /*compression_type = (ul_scan_size > ul_tiff_size) ? GDI_COMP_MODITIFF : GDI_COMP_SCANLINE;*/
+ switch (compression_type) {
+ case GDI_COMP_MODITIFF:
++#define FUDGE_BIG_BANDS
++#ifndef FUDGE_BIG_BANDS
+ ul_comp_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_REAL_COMP);
++#else
++ {
++ /* Very ugly. The printer will hose if the compressed
++ band size is over 65536, so we "fudge" the data in
++ this case repeatedly until we get what we want.
++
++ The fudge algorithm is simple, this is kinda-sorta
++ RLE, so we just round groups of bits in groups of
++ 2, then 3, then 4, etc until the thing works. */
++#define MAXBAND 0xffff
++#define ASSERT(x)
++ int fudge=0;
++ byte *use_band=ibp;
++ do {
++ ul_comp_size = FrameTiffComp(obp, use_band,
++ band_height, band_width_bytes,
++ GDI_REAL_COMP);
++ if (ul_comp_size > MAXBAND-8) {
++ int f, g, h;
++ if (!fudge) {
++ ASSERT(use_band == ibp);
++ use_band = (byte*)gs_malloc(ul_band_size, 1, "gdi_print_page/fudge");
++ fudge=1;
++ }
++ memcpy(use_band, ibp, ul_band_size);
++ fudge++;
++ ASSERT(fudge>=2);
++ {
++#define FUDGE2(x) ( (((((x)>>6)&0x3)?3:0)<<6) \
++ | (((((x)>>4)&0x3)?3:0)<<4) \
++ | (((((x)>>2)&0x3)?3:0)<<2) \
++ | (((((x)>>0)&0x3)?3:0)) )
++#define FUDGE4(x) ( (((((x)>>4)&0xf)?0xf:0)<<4) \
++ | (((((x)>>0)&0xf)?0xf:0)) )
++#define FUDGE8(x) ( (((((x)>>0)&0xff)?0xf:0)) )
++#define FUDGE(fudge, x) ( (fudge == 2 ? FUDGE2(x) \
++ : fudge == 3 ? FUDGE4(x) \
++ : fudge == 4 ? FUDGE8(x) \
++ : 0 ) )
++
++ for(f=0;f<ul_band_size; f++) {
++ use_band[f] = FUDGE(fudge, ibp[f]);
++ }
++ }
++ }
++ } while (ul_comp_size > MAXBAND-8);
++ oh_well:
++ if (fudge > 1) {
++ ASSERT(use_band != ibp);
++ gs_free(use_band, ul_band_size, 1, "gdi_print_page/fudge");
++ /*fprintf(stderr, "smartgdi: band %d fudge factor is %d\n", i, fudge);*/
++ }
++ }
++#endif
+ break;
+ case GDI_COMP_SCANLINE:
+ ul_comp_size = bmp2run(obp, ibp, band_height, band_width_bytes, GDI_REAL_COMP);
+@@ -253,7 +323,7 @@
+
+ prn_stream = WriteBandHeader(prn_stream, i, compression_type, (band_width_bytes * 8),
+ band_height, ul_comp_size);
+- //fprintf(prn_stream, "[%d] band, size : %d\n", i, ul_tiff_size);
++ /*fprintf(prn_stream, "[%d] band, size : %d\n", i, ul_tiff_size);*/
+ fwrite(obp, ul_comp_size, 1, prn_stream);
+ }
+
+@@ -271,50 +341,50 @@
+ unsigned char buffer[300];
+ int dots_per_inch = (int)pdev->y_pixels_per_inch;
+
+- strcpy(buffer, "\x1b%-12345X");
++ strcpy(buffer, "\033%-12345X");
+
+- // Paper Type
+- strcat(buffer, "@PJL SET PAPERTYPE = NORMAL ON\x0d\x0a");
+- //Density
+- strcat(buffer, "@PJL SET DENSITY = 1\x0d\x0a");
+- // Toner Save
+- strcat(buffer, "@PJL SET TONERSAVE = OFF\x0d\x0a");
+- // Enter Language SMART
+- strcat(buffer, "@PJL ENTER LANGUAGE = SMART\x0d\x0a");
+- // JobStart
+- strcat(buffer, "$PJL JOB START\x0d\x0a");
++ /* Paper Type*/
++ strcat(buffer, "@PJL SET PAPERTYPE = NORMAL ON\015\012");
++ /*Density*/
++ strcat(buffer, "@PJL SET DENSITY = 1\015\012");
++ /* Toner Save*/
++ strcat(buffer, "@PJL SET TONERSAVE = OFF\015\012");
++ /* Enter Language SMART*/
++ strcat(buffer, "@PJL ENTER LANGUAGE = SMART\015\012");
++ /* JobStart*/
++ strcat(buffer, "$PJL JOB START\015\012");
+
+- // Resolution
++ /* Resolution*/
+ if (dots_per_inch == 600)
+- strcat(buffer, "$PJL RESOLUTION = 600\x0d\x0a");
++ strcat(buffer, "$PJL RESOLUTION = 600\015\012");
+ else
+- strcat(buffer, "$PJL RESOLUTION = 300\x0d\x0a");
++ strcat(buffer, "$PJL RESOLUTION = 300\015\012");
+
+- // Copies
+- strcat(buffer, "$PJL COPIES = 1\x0d\x0a");
+- // Paper Size
++ /* Copies*/
++ strcat(buffer, "$PJL COPIES = 1\015\012");
++ /* Paper Size*/
+ switch (gdev_pcl_paper_size((gx_device*)pdev))
+ {
+ case PAPER_SIZE_A4:
+- strcat(buffer, "$PJL PAGE A4 AUTO\x0d\x0a");
++ strcat(buffer, "$PJL PAGE A4 AUTO\015\012");
+ break;
+ case PAPER_SIZE_LETTER:
+- strcat(buffer, "$PJL PAGE LETTER AUTO\x0d\x0a");
++ strcat(buffer, "$PJL PAGE LETTER AUTO\015\012");
+ break;
+ case PAPER_SIZE_LEGAL:
+- strcat(buffer, "$PJL PAGE LEGAL AUTO\x0d\x0a");
++ strcat(buffer, "$PJL PAGE LEGAL AUTO\015\012");
+ break;
+ default:
+- strcat(buffer, "$PJL PAGE LETTER AUTO\x0d\x0a");
++ strcat(buffer, "$PJL PAGE LETTER AUTO\015\012");
+ break;
+ }
+- // bitmap start
+- strcat(buffer, "$PJL BITMAP START\x0d\x0a");
+- // write buffer to file.
++ /* bitmap start*/
++ strcat(buffer, "$PJL BITMAP START\015\012");
++ /* write buffer to file.*/
+ ulSize = strlen(buffer);
+ fwrite(buffer, 1, ulSize, fp );
+ return(fp);
+-} // WritePJLHeaderData()
++} /* WritePJLHeaderData() */
+
+
+ FILE *WriteBandHeader
+@@ -335,33 +405,33 @@
+
+ ulBandSize += 8;
+
+- // bandsize
++ /* bandsize*/
+ buf[i++] = (unsigned char)((ulBandSize >> 24) & 0xff);
+ buf[i++] = (unsigned char)((ulBandSize >> 16) & 0xff);
+ buf[i++] = (unsigned char)((ulBandSize >> 8) & 0xff);
+ buf[i++] = (unsigned char)(ulBandSize & 0xff);
+
+- // id
++ /* id */
+ buf[i++] = (unsigned char)((usBandNo >> 8) & 0xff);
+ buf[i++] = (unsigned char)(usBandNo & 0xff);
+
+- // compress mode
++ /* compress mode */
+ buf[i++] = (unsigned char)(ubCompMode & 0xff);
+
+- // ubLeft
++ /* ubLeft */
+ buf[i++] = (unsigned char)(ubLeft & 0xff);
+
+- // height
++ /* height*/
+ buf[i++] = (unsigned char)((usBandHeight >> 8) & 0xff);
+ buf[i++] = (unsigned char)(usBandHeight & 0xff);
+
+- // width
++ /* width */
+ buf[i++] = (unsigned char)((usBandWidth >> 8) & 0xff);
+ buf[i++] = (unsigned char)(usBandWidth & 0xff);
+
+ fwrite(buf, 1, i, fp);
+ return(fp);
+-} // end of WriteBandHeader()
++} /* end of WriteBandHeader()*/
+
+ FILE *WriteTrailerData(FILE *fp)
+ {
+@@ -369,18 +439,18 @@
+ unsigned long buffer[200];
+
+ memset((char*)buffer, 0x00, 200);
+- strcpy((char*)buffer, "$PJL PRINT 4\x0d\x0a");
+- strcat((char*)buffer, "$PJL EOJ\x0d\x0a");
+- strcat((char*)buffer, "$PJL SYNC\x0d\x0a");
+- strcat((char*)buffer, "$PJL RELEASE 0 2047\x0d\x0a");
+- strcat((char*)buffer, "$PJL GARBAGE\x0d\x0a");
+- strcat((char*)buffer, "\x1b%-12345X\x0d\x0a");
++ strcpy((char*)buffer, "$PJL PRINT 4\015\012");
++ strcat((char*)buffer, "$PJL EOJ\015\012");
++ strcat((char*)buffer, "$PJL SYNC\015\012");
++ strcat((char*)buffer, "$PJL RELEASE 0 2047\015\012");
++ strcat((char*)buffer, "$PJL GARBAGE\015\012");
++ strcat((char*)buffer, "\033%-12345X\015\012");
+
+ ulSize = strlen((char*)buffer);
+ fwrite(buffer, 1, ulSize, fp);
+
+ return(fp);
+-} // WriteTrailerData()
++} /* WriteTrailerData()*/
+
+ unsigned long FrameTiffComp(unsigned char *pubDest,
+ unsigned char *pubSrc,
+@@ -399,7 +469,7 @@
+
+ for (i = 0; i < usTotalLines; i++)
+ {
+- if (!(ubMode & 0x02)) //
++ if (!(ubMode & 0x02))
+ {
+ usLineSize = FrameTiff_Comp(SrcPtr, TgtPtr, usBytesPerLine);
+ }
+@@ -416,7 +486,7 @@
+ ulret += usLineSize;
+ }
+
+- if (!(ubMode & 0x02)) //
++ if (!(ubMode & 0x02))
+ {
+ switch (ulret%4)
+ {
+@@ -448,7 +518,7 @@
+ }
+ }
+ return(ulret);
+-} // FrameTiffComp()
++} /* FrameTiffComp()*/
+
+ unsigned int FrameTiff_Comp(unsigned char *lpSrcBuf, unsigned char *lpTgtBuf, unsigned int nSrcBytes)
+ {
+@@ -528,13 +598,13 @@
+ usEndCnt = 16384;
+ }
+ usEndCnt = usCount - 2;
+- // usEndCnt = usCount - 2; original
+- // 19990824 by LSM : for end file while (usEndCnt--)
++ /* usEndCnt = usCount - 2; original*/
++ /* 19990824 by LSM : for end file while (usEndCnt--)*/
+ while (usEndCnt--)
+ {
+ /* read next data */
+ ubFirst = ubSecond;
+- ubSecond = *pubSrc++; // read 3rd Data
++ ubSecond = *pubSrc++; /* read 3rd Data*/
+ if (ubFirst == ubSecond)
+ {
+ if (usEndCnt <= 1)
+@@ -544,7 +614,7 @@
+ }
+ else
+ {
+- ubSecond = *pubSrc++; // read 4th Data
++ ubSecond = *pubSrc++; /* read 4th Data*/
+ usEndCnt--;
+ if (ubFirst == ubSecond)
+ {
+@@ -660,14 +730,14 @@
+ {
+ usEndCnt = 16384;
+ }
+- // usEndCnt = usCount - 2;
++ /* usEndCnt = usCount - 2;*/
+ usEndCnt = usCount - 2;
+- // 19990824 by LSM : for Last file while (usEndCnt--)
++ /* 19990824 by LSM : for Last file while (usEndCnt--)*/
+ while (usEndCnt--)
+ {
+ /* read next data */
+ ubFirst = ubSecond;
+- ubSecond = *pubSrc++; // read 3rd Data
++ ubSecond = *pubSrc++; /* read 3rd Data*/
+ if (ubFirst == ubSecond)
+ {
+ if (usEndCnt <= 1)
+@@ -677,8 +747,8 @@
+ }
+ else
+ {
+- ubSecond = *pubSrc++; // read 4th Data
+- usEndCnt--; // 19990824 by LSM
++ ubSecond = *pubSrc++; /* read 4th Data*/
++ usEndCnt--; /* 19990824 by LSM*/
+ if (ubFirst == ubSecond)
+ {
+ ubMisCnt = 3;
+@@ -691,7 +761,7 @@
+ /* save data */
+ usControl = (unsigned int) (pubSrc - pubOrg);
+ usControl -= ubMisCnt;
+- // 19990824 by LSM : for fixing GPF on Photoshop
++ /* 19990824 by LSM : for fixing GPF on Photoshop*/
+ if (usControl > usCount)
+ {
+ usControl = usCount;
+@@ -728,77 +798,77 @@
+ } sc_tbl;
+
+ static sc_tbl gdi_ScanTbl[256] = {
+-{ 8, 0, 0 }, { 7, 1, 1 }, { 6, 1, 0 }, { 6, 2, 1 }, // 0x00
++{ 8, 0, 0 }, { 7, 1, 1 }, { 6, 1, 0 }, { 6, 2, 1 }, /* 0x00*/
+ { 5, 1, 0 }, { 0, 0, 1 }, { 5, 2, 0 }, { 5, 3, 1 },
+ { 4, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 4, 2, 0 }, { 0, 0, 1 }, { 4, 3, 0 }, { 4, 4, 1 },
+-{ 3, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x10
++{ 3, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x10*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 3, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 3, 3, 0 }, { 0, 0, 1 }, { 3, 4, 0 }, { 3, 5, 1 },
+-{ 2, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x20
++{ 2, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x20*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 2, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x30
++{ 2, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x30*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 2, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 2, 4, 0 }, { 0, 0, 1 }, { 2, 5, 0 }, { 2, 6, 1 },
+-{ 1, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x40
++{ 1, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x40*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x50
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x50*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 1, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x60
++{ 1, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x60*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 1, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x70
++{ 1, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x70*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 1, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 1, 5, 0 }, { 0, 0, 1 }, { 1, 6, 0 }, { 1, 7, 1 },
+-{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x80
++{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x80*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x90
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x90*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xa0
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xa0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xb0
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xb0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xc0
++{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xc0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xd0
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xd0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xe0
++{ 0, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xe0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+-{ 0, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xf0
++{ 0, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xf0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 5, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },
+ { 0, 6, 0 }, { 0, 0, 1 }, { 0, 7, 0 }, { 0, 8, 1 },
+ };
+
+ static sc_tbl gdi_ScanTbl4[16] = {
+-{ 4, 0, 0 }, { 3, 1, 1 }, { 2, 1, 0 }, { 2, 2, 1 }, // 0x00
+-{ 1, 1, 0 }, { 0, 0, 1 }, { 1, 2, 0 }, { 1, 3, 1 }, // 0x04
+-{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x08
+-{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 3, 0 }, { 0, 4, 1 } // 0x0c
++{ 4, 0, 0 }, { 3, 1, 1 }, { 2, 1, 0 }, { 2, 2, 1 }, /* 0x00*/
++{ 1, 1, 0 }, { 0, 0, 1 }, { 1, 2, 0 }, { 1, 3, 1 }, /* 0x04*/
++{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x08*/
++{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 3, 0 }, { 0, 4, 1 } /* 0x0c*/
+ };
+
+ long SaveScanData( unsigned char *, unsigned short, unsigned short, unsigned short, unsigned short, unsigned short );
+@@ -816,32 +886,32 @@
+ lWarp = (long)(usWarp << 3);
+ lDis = ((long)usDy * lWarp) + (long)sDx;
+
+- // 1st, 2nd, 3rd & 4th byte
+- ultmp_dat = 0xc0000000;
++ /* 1st, 2nd, 3rd & 4th byte*/
++ ultmp_dat = 0xc0000000ul;
+ if (lDis < 0)
+ {
+- ultmp_dat |= 0x20000000;
++ ultmp_dat |= 0x20000000ul;
+ }
+- ultmp_dat |= (lDis & 0x1fffffff);
+- *out_buf++ = (unsigned char)((ultmp_dat & 0xff000000) >> 24);
+- *out_buf++ = (unsigned char)((ultmp_dat & 0xff0000) >> 16);
+- *out_buf++ = (unsigned char)((ultmp_dat & 0xff00) >> 8);
+- *out_buf++ = (unsigned char)(ultmp_dat & 0xff);
++ ultmp_dat |= (lDis & 0x1ffffffful);
++ *out_buf++ = (unsigned char)((ultmp_dat & 0xff000000ul) >> 24);
++ *out_buf++ = (unsigned char)((ultmp_dat & 0xff0000ul) >> 16);
++ *out_buf++ = (unsigned char)((ultmp_dat & 0xff00ul) >> 8);
++ *out_buf++ = (unsigned char)(ultmp_dat & 0xfful);
+
+- // 5th & 6th byte
++ /* 5th & 6th byte*/
+ ustmp_dat = 0xc000;
+ ustmp_dat |= (usRl & 0x3fff);
+ *out_buf++ = (unsigned char)((ustmp_dat & 0xff00) >> 8);
+ *out_buf++ = (unsigned char)(ustmp_dat & 0xff);
+
+ return(6);
+-} // Save6Bytes()
++} /* Save6Bytes()*/
+
+ long Save4Bytes(unsigned char *out_buf, unsigned short usDy, unsigned short usRl, short sDx)
+ {
+ unsigned short ustmp_dat;
+
+- // 1st & 2nd byte
++ /* 1st & 2nd byte*/
+ ustmp_dat = 0x8000;
+ if (sDx < 0)
+ {
+@@ -851,7 +921,7 @@
+ *out_buf++ = (unsigned char)((ustmp_dat & 0xff00) >> 8);
+ *out_buf++ = (unsigned char)(ustmp_dat & 0xff);
+
+- // 3rd & 4th byte
++ /* 3rd & 4th byte*/
+ ustmp_dat = 0x8000;
+ ustmp_dat |= ((usDy & 0x03) << 12);
+ ustmp_dat |= (usRl & 0xfff);
+@@ -859,13 +929,13 @@
+ *out_buf++ = (unsigned char)(ustmp_dat & 0xff);
+
+ return(4);
+-} // end of Save4Bytes()
++} /* end of Save4Bytes()*/
+
+ long Save2Bytes(unsigned char *out_buf, unsigned short usDy, unsigned short usRl, short sDx)
+ {
+ unsigned char ubtmp_dat;
+
+- // 1st byte
++ /* 1st byte*/
+ ubtmp_dat = 0x00;
+ if (usDy == 1)
+ {
+@@ -874,7 +944,7 @@
+ ubtmp_dat |= (usRl & 0x3f);
+ *out_buf++ = ubtmp_dat;
+
+- // 2nd byte
++ /* 2nd byte*/
+ if (sDx < 0)
+ {
+ ubtmp_dat = 0x80;
+@@ -886,7 +956,7 @@
+ ubtmp_dat |= ((unsigned char)sDx & 0x7f);
+ *out_buf++ = ubtmp_dat;
+ return(2);
+-} // end of Save2Bytes()
++} /* end of Save2Bytes()*/
+
+ long SaveScanData (unsigned char *out_buf,
+ unsigned short us1Cnt,
+@@ -900,26 +970,26 @@
+
+ sDisX = (int)usPosX01 - (int)usPosX10;
+
+- // 48 bit
++ /* 48 bit*/
+ if ( (usDy > 3) || (us1Cnt > 4095) )
+ {
+ Save6Bytes(out_buf, usDy, us1Cnt, sDisX, usWarp);
+ lRet = 6;
+ }
+- // 32 bit
++ /* 32 bit*/
+ else if ( (usDy > 1) || (us1Cnt > 63) || (sDisX > 127) || (sDisX < -128) )
+ {
+ Save4Bytes(out_buf, usDy, us1Cnt, sDisX);
+ lRet = 4;
+ }
+- // 16 bit
++ /* 16 bit*/
+ else
+ {
+ Save2Bytes(out_buf, usDy, us1Cnt, sDisX);
+ lRet = 2;
+ }
+ return(lRet);
+-} // end of SaveScanData()
++} /* end of SaveScanData()*/
+
+
+ long UpdateScanSize (unsigned char *out_buf,
+@@ -934,23 +1004,23 @@
+
+ sDisX = usPosX01 - usPosX10;
+
+- // 48 bit
++ /* 48 bit*/
+ if ( (usDy > 3) || (us1Cnt > 4095) )
+ {
+ lRet = 6;
+ }
+- // 32 bit
++ /* 32 bit*/
+ else if ( (usDy > 1) || (us1Cnt > 63) || (sDisX > 127) || (sDisX < -128) )
+ {
+ lRet = 4;
+ }
+- // 16 bit
++ /* 16 bit*/
+ else
+ {
+ lRet = 2;
+ }
+ return(lRet);
+-} // end of UpdateScanSize() by bglee 19981224
++} /* end of UpdateScanSize() by bglee 19981224*/
+
+ long GetSimpleScan(unsigned char *out_buf,
+ unsigned char ubSizeMode,
+@@ -983,10 +1053,10 @@
+ }
+
+
+- // 1 X 1 X
++ /* 1 X 1 X*/
+ if (ubPreBit)
+ {
+- // 1 0 1 X
++ /* 1 0 1 X*/
+ if (ubDx)
+ {
+ lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+@@ -994,23 +1064,23 @@
+ *usPosX01 = usBytePos + ubDx;
+ *us1Count = ubRl;
+ *usDy = 0;
+- // 1 0 1 0
++ /* 1 0 1 0*/
+ if (!ubLastBit)
+ {
+- // 19990330 by bglee
++ /* 19990330 by bglee*/
+ out_buf = out_buf + lScanSize;
+
+ lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+ *usPosX10 = *usPosX01 ;
+ *us1Count = 0;
+ }
+- // 1 0 1 1
++ /* 1 0 1 1*/
+ }
+- // 1 1 1 X
++ /* 1 1 1 X*/
+ else
+ {
+ *us1Count += ubRl;
+- // 1 1 1 0
++ /* 1 1 1 0*/
+ if (!ubLastBit)
+ {
+ lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+@@ -1018,16 +1088,16 @@
+ *us1Count = 0;
+ *usDy = 0;
+ }
+- // 1 1 1 1
++ /* 1 1 1 1*/
+ }
+ }
+- // 0 X 1 X
++ /* 0 X 1 X*/
+ else
+ {
+- // 0 X 1 X
++ /* 0 X 1 X*/
+ *usPosX01 = usBytePos + ubDx;
+ *us1Count += ubRl;
+- // 0 X 1 0
++ /* 0 X 1 0*/
+ if (!ubLastBit)
+ {
+ lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+@@ -1035,11 +1105,11 @@
+ *us1Count = 0;
+ *usDy = 0;
+ }
+- // 0 X 1 1
++ /* 0 X 1 1*/
+ }
+
+ return(lScanSize);
+-} // end of GetSimpleScan()
++} /* end of GetSimpleScan() */
+
+
+ long scan_map (unsigned char *in_buf,
+@@ -1049,7 +1119,7 @@
+ unsigned char ubMode)
+ {
+ unsigned int i, j, k;
+- unsigned char ubPreBit, ubCrtByte;//, ubLastBit;
++ unsigned char ubPreBit, ubCrtByte;/*, ubLastBit;*/
+ long lScanSize, lTmp;
+ long lCrtSize;
+ unsigned short us1Count;
+@@ -1078,7 +1148,7 @@
+ switch (ubCrtByte)
+ {
+ case 0x00:
+- // 1 0
++ /* 1 0 */
+ if (ubPreBit)
+ {
+ lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth);
+@@ -1088,16 +1158,16 @@
+ us1Count = 0;
+ usDy = 0;
+ }
+- // 0 0
++ /* 0 0*/
+ break;
+
+ case 0xff:
+- // 1 1
++ /* 1 1*/
+ if (ubPreBit)
+ {
+ us1Count += 8;
+ }
+- // 0 1
++ /* 0 1*/
+ else
+ {
+ us1Count = 8;
+@@ -1106,7 +1176,7 @@
+ break;
+
+ default:
+- // X X 1 X
++ /* X X 1 X*/
+ if (gdi_ScanTbl[ubCrtByte].ubRl)
+ {
+ usBytePos = (j << 3);
+@@ -1114,7 +1184,7 @@
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+ }
+- // complex pattern
++ /* complex pattern*/
+ else
+ {
+ for (k = 0; k < 2; k++)
+@@ -1124,7 +1194,7 @@
+ switch (ubTemp)
+ {
+ case 0x00:
+- // 1 0
++ /* 1 0*/
+ if (ubPreBit)
+ {
+ lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth);
+@@ -1134,16 +1204,16 @@
+ us1Count = 0;
+ usDy = 0;
+ }
+- // 0 0
++ /* 0 0*/
+ break;
+
+ case 0x0f:
+- // 1 1
++ /* 1 1*/
+ if (ubPreBit)
+ {
+ us1Count += 4;
+ }
+- // 0 1
++ /* 0 1*/
+ else
+ {
+ us1Count = 4;
+@@ -1152,7 +1222,7 @@
+ break;
+
+ case 0x05:
+- // 1 0101
++ /* 1 0101*/
+ if (ubPreBit)
+ {
+ lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth);
+@@ -1162,13 +1232,13 @@
+ usPosX10 = usBytePos - us1Count;
+ usDy = 0;
+ }
+- // 0 0101
++ /* 0 0101*/
+ usPosX01 = usBytePos + 1;
+ lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, 1, usDy, usPosX10, usPosX01, usWidth);
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+
+- // next
++ /* next*/
+ usPosX10 = 0;
+ usPosX01 = 2;
+ usDy = 0;
+@@ -1176,12 +1246,12 @@
+ break;
+
+ case 0x09:
+- // 1 1001
++ /* 1 1001*/
+ if (ubPreBit)
+ {
+ us1Count++;
+ }
+- // 0 1001
++ /* 0 1001*/
+ else
+ {
+ usPosX01 = usBytePos;
+@@ -1191,7 +1261,7 @@
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+
+- // next
++ /* next*/
+ if (ubPreBit)
+ {
+ usPosX10 = usBytePos - us1Count + 1;
+@@ -1207,12 +1277,12 @@
+ break;
+
+ case 0x0a:
+- // 1 1010
++ /* 1 1010*/
+ if (ubPreBit)
+ {
+ us1Count++;
+ }
+- // 0 1010
++ /* 0 1010*/
+ else
+ {
+ us1Count = 1;
+@@ -1222,25 +1292,25 @@
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+
+- // next
++ /* next*/
+ usPosX10 = usBytePos - us1Count + 1;
+ usPosX01 = usBytePos + 2;
+ lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, 1, 0, usPosX10, usPosX01, usWidth);
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+- // next
++ /* next*/
+ usPosX10 = usBytePos + 2;
+ usDy = 0;
+ us1Count = 0;
+ break;
+
+ case 0x0b:
+- // 1 1011
++ /* 1 1011*/
+ if (ubPreBit)
+ {
+ us1Count++;
+ }
+- // 0 1011
++ /* 0 1011*/
+ else
+ {
+ us1Count = 1;
+@@ -1250,7 +1320,7 @@
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+
+- // next
++ /* next*/
+ if (ubPreBit)
+ {
+ usPosX10 = usBytePos - us1Count + 1;
+@@ -1267,12 +1337,12 @@
+ break;
+
+ case 0x0d:
+- // 1 1101
++ /* 1 1101*/
+ if (ubPreBit)
+ {
+ us1Count += 2;
+ }
+- // 0 1101
++ /* 0 1101*/
+ else
+ {
+ us1Count = 2;
+@@ -1282,7 +1352,7 @@
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+
+- // next
++ /* next*/
+ if (ubPreBit)
+ {
+ usPosX10 = usBytePos - us1Count + 2;
+@@ -1298,17 +1368,17 @@
+ break;
+
+ default:
+- // X X 1 X
++ /* X X 1 X*/
+ lTmp = GetSimpleScan(out_buf, ubSizeMode, &us1Count, &usDy, &usPosX10, &usPosX01, usBytePos, ubTemp, 4, ubPreBit, usWidth);
+ out_buf = out_buf + lTmp;
+ lScanSize += lTmp;
+ break;
+- } // end of switch()
++ } /* end of switch()*/
+ ubPreBit = ubTemp & 0x01;
+- } // end of k-loop
++ } /* end of k-loop*/
+ }
+ break;
+- } // end of switch()
++ } /* end of switch()*/
+
+ ubPreBit = ubCrtByte & 0x01;
+ } /*for usWidth */
+@@ -1326,7 +1396,7 @@
+ }
+ usDy++;
+
+- // check size over
++ /* check size over*/
+ if ( (i % 5) == 4 )
+ {
+ lCrtSize = (long)((long)usWidth * (long)(i + 1));
+@@ -1342,7 +1412,7 @@
+ lScanSize = -1;
+ }
+ return(lScanSize);
+-} // end of scan_map()
++} /* end of scan_map() */
+
+ /*****************************************************************
+ * H : bmp2run
+@@ -1362,7 +1432,7 @@
+ unsigned char *tmp_buf1, *tmp_buf2;
+ long scan_size;
+
+- //return(-1); // 19990323 by bglee - request from SM Lee
++ /*return(-1);*/ /* 19990323 by bglee - request from SM Lee*/
+
+ tmp_buf1 = in_buf;
+ tmp_buf2 = out_buf;
+@@ -1372,7 +1442,7 @@
+ return(-1);
+ }
+
+- if ( !(ubMode & 0x02) ) // real compression //---
++ if ( !(ubMode & 0x02) ) /* real compression */
+ {
+ out_buf = tmp_buf2 + scan_size;
+ *out_buf++ = 0x00;
+@@ -1385,7 +1455,7 @@
+ scan_size += 2;
+ }
+ }
+- else // pre-compression
++ else /* pre-compression*/
+ {
+ scan_size += 2;
+ if (scan_size % 4)
diff -urN /usr/ports/print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak
--- /usr/ports/print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak Thu Jan 1 09:00:00 1970
+++ print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak Mon Jul 21 13:59:20 2003
@@ -0,0 +1,16 @@
+--- src/smartgdi-contrib.mak.orig Wed Jun 19 21:43:43 2002
++++ src/smartgdi-contrib.mak Mon Jul 21 13:59:00 2003
+@@ -3,10 +3,12 @@
+ ### Note : this driver is used by Samsung SmartGDI compatible printers. ###
+ ###
+
++gdi_opts=-DGS_VERSION_MAJOR=$(GS_VERSION_MAJOR)
++
+ GDIMONO=$(GLOBJ)gdevgdi.$(OBJ) $(HPPCL)
+
+ $(DD)gdi.dev: $(GDIMONO) $(DD)page.dev
+ $(SETPDEV) $(DD)gdi $(GDIMONO)
+
+ $(GLOBJ)gdevgdi.$(OBJ): $(GLSRC)gdevgdi.c $(PDEVH) $(gdevpcl_h)
+- $(GLCC) $(GLO_)gdevgdi.$(OBJ) $(C_) $(GLSRC)gdevgdi.c
++ $(GLCC) $(GLO_)gdevgdi.$(OBJ) $(C_) $(gdi_opts) $(GLSRC)gdevgdi.c
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030721220024.66c17f2b.tkato>