Date: Mon, 23 Nov 2015 13:45:34 +0100 From: Svatopluk Kraus <onwahe@gmail.com> To: =?UTF-8?B?Sm9zw6kgUMOpcmV6?= <fbl@aoek.com> Cc: "freebsd-current@freebsd.org" <freebsd-current@freebsd.org> Subject: Re: Aheros AR9565: buffer error messages from ath_edma_rxbuf_alloc and ath_edma_rxfifo_alloc Message-ID: <CAFHCsPU8SgyRE0=N0N=TAYXsB%2BsiKC0r5vYgHAv6LDSiz6_L2w@mail.gmail.com> In-Reply-To: <5725cee00ae81e93db6b0be560d10285@mail.yourbox.net> References: <5725cee00ae81e93db6b0be560d10285@mail.yourbox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 23, 2015 at 1:12 PM, Jos=C3=A9 P=C3=A9rez <fbl@aoek.com> wrote: > Hi, > I am the (happy?) owner of an Atheros AR9565 which used to work just fine= . > > I recently updated an old -current, and a flood of these messages bumped = up: > Nov 13 17:47:16 test kernel: ath0: ath_edma_rxbuf_alloc: nothing on rxbuf= ?! > Nov 13 17:47:16 test kernel: ath0: ath_edma_rxfifo_alloc: Q1: alloc faile= d: > i=3D24, nb > ufs=3D128? > > # pciconf -lv | relevant_part > ath0@pci0:1:0:0: class=3D0x028000 card=3D0x064211ad chip=3D0x00361= 68c > rev=3D0x01 hdr=3D0x00 > vendor =3D 'Qualcomm Atheros' > device =3D 'QCA9565 / AR9565 Wireless Network Adapter' > class =3D network > > # dmesg | relevant_part > ath0: <Qualcomm Atheros AR9565> mem 0xf0800000-0xf087ffff irq 32 at devic= e > 0.0 on pci1 > ath0: WB335 2-ANT card detected > ar9300_attach: calling ar9300_hw_attach > ar9300_hw_attach: calling ar9300_eeprom_attach > ar9300_flash_map: unimplemented for now > Restoring Cal data from DRAM > Restoring Cal data from EEPROM > Restoring Cal data from Flash > Restoring Cal data from Flash > Restoring Cal data from OTP > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 RX streams; 1 TX streams > ath0: AR9565 mac 704.1 RF5110 phy 2261.3 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > > # ifconfig | relevant_part > wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 > ether a4:db:30:ab:ad:ca > inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet MCS mode 11ng > status: associated > ssid myssid channel 6 (2437 MHz 11g ht/20) bssid de:ad:be:ee:ee:e= f > regdomain ETSI2 country ES indoor ecm authmode WPA2/802.11i > privacy ON deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit > txpower 30 bmiss 7 scanvalid 60 protmode CTS ampdulimit 64k > ampdudensity 4 shortgi wme burst roaming MANUAL > groups: wlan > > > > Is there anything I can help with to improve this? Thank you. > What revision do you use? If you use <r291142, r291192>, please, try to update to r291193 or higher. Svatopluk Kraus > Regards, > > -- > Jos=C3=A9 P=C3=A9rez > _______________________________________________ > freebsd-current@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org= "
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFHCsPU8SgyRE0=N0N=TAYXsB%2BsiKC0r5vYgHAv6LDSiz6_L2w>