Date: Wed, 20 Oct 2010 09:55:09 +0300 From: Andriy Gapon <avg@icyb.net.ua> To: Hans Petter Selasky <hselasky@c2i.net> Cc: "freebsd-acpi@freebsd.org" <freebsd-acpi@freebsd.org> Subject: Re: MacBookPro 5,1 Message-ID: <4CBE924D.6020306@icyb.net.ua> In-Reply-To: <201010200834.28444.hselasky@c2i.net> References: <201010121209.06397.hselasky@c2i.net> <201010182221.36745.hselasky@c2i.net> <1287467222.6530.3067.camel@minggr.sh.intel.com> <201010200834.28444.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
on 20/10/2010 09:34 Hans Petter Selasky said the following:
> On Tuesday 19 October 2010 07:47:02 Lin Ming wrote:
>> On Tue, 2010-10-19 at 04:21 +0800, Hans Petter Selasky wrote:
>>> On Monday 18 October 2010 02:01:09 Moore, Robert wrote:
>>>> Can you send us the acpidump for the machine?
>>>>
>>>> Also, tell us which control method is failing.
>>>>
>>>> Thanks
>>>
>>> Hi,
>>>
>>> Please find attached dump of ACPI tables.
>>>
>>> It is the function AcpiRsCreateAmlResources() which writes beyond the
>>> buffer it allocates.
>>
>> Could you enable AML debug output to get more info?
>> But I don't know how to enable it on FreeBSD.
>>
>> In Linux, the AML debug output is enabled with kernel boot parameters
>> like below.
>> acpi.debug_layer=0xffffffff acpi.debug_level=0xffffffff
>>
>> FreeBSD may have some similar boot parameters.
>
> I've enabled the debug prints just around the failing function. Here is the
> result:
>
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci_link32: Enter debugger
>
> **** Context Switch from TID 0xffffffffffffffff to TID 0x186a0 ****
>
> rscalc-0293 [0x186a0] [188762] RsGetAmlLength : ----Entry
> rscalc-0369 [0x186a0] [188762] RsGetAmlLength : ----Exit- AE_OK
> rslist-0225 [0x186a0] [188762] RsConvertResourcesToAm: ----Entry
> rsmisc-0437 [0x186a0] [188763] RsConvertResourceToAml: ----Entry
> rsmisc-0636 [0x186a0] [188763] RsConvertResourceToAml: ----Exit- AE_OK
> rsmisc-0437 [0x186a0] [188763] RsConvertResourceToAml: ----Entry
> rsmisc-0636 [0x186a0] [188763] RsConvertResourceToAml: ----Exit- AE_OK
> rslist-0273 [0x186a0] [188762] RsConvertResourcesToAm: ----Exit- AE_OK
> rscreate-0554 [0x186a0] [188761] RsCreateAmlResources : OutputBuffer
> 0xffffff00031f9000 Length D
> Dirty free 0xffffff00031f9000 13 at 13
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> AcpiOsFree() at AcpiOsFree+0x72
> AcpiUtDeleteInternalObj() at AcpiUtDeleteInternalObj+0x335
> AcpiUtUpdateRefCount() at AcpiUtUpdateRefCount+0x188
> AcpiUtUpdateObjectReference() at AcpiUtUpdateObjectReference+0x6e
> AcpiUtRemoveReference() at AcpiUtRemoveReference+0xd5
> AcpiRsSetSrsMethodData() at AcpiRsSetSrsMethodData+0x14b
> AcpiSetCurrentResources() at AcpiSetCurrentResources+0xb8
> acpi_pci_link_route_irqs() at acpi_pci_link_route_irqs+0x204
Can you please check which branch is executed here?
if (sc->pl_crs_bad)
status = acpi_pci_link_srs_from_links(sc, &srsbuf);
else
status = acpi_pci_link_srs_from_crs(sc, &srsbuf);
> acpi_pci_link_route_interrupt() at acpi_pci_link_route_interrupt+0x1a9
> acpi_pcib_route_interrupt() at acpi_pcib_route_interrupt+0x46b
> pci_assign_interrupt() at pci_assign_interrupt+0x1c3
> pci_add_resources() at pci_add_resources+0x14a
> pci_add_children() at pci_add_children+0x10e
> acpi_pci_attach() at acpi_pci_attach+0xcd
> device_attach() at device_attach+0x69
> bus_generic_attach() at bus_generic_attach+0x1a
> acpi_pcib_attach() at acpi_pcib_attach+0x20e
> acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0x280
> device_attach() at device_attach+0x69
> bus_generic_attach() at bus_generic_attach+0x1a
> acpi_attach() at acpi_attach+0xaa6
> device_attach() at device_attach+0x69
> bus_generic_attach() at bus_generic_attach+0x1a
> nexus_acpi_attach() at nexus_acpi_attach+0x69
> device_attach() at device_attach+0x69
> bus_generic_new_pass() at bus_generic_new_pass+0xd6
> bus_set_pass() at bus_set_pass+0x7a
> configure() at configure+0xa
> mi_startup() at mi_startup+0x59
> btext() at btext+0x2c
>
> --HPS
--
Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4CBE924D.6020306>