Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 11 Feb 2004 16:01:11 +0300
From:      Yuri Grebenkin <rainbreath@hotpop.com>
To:        freebsd-multimedia@freebsd.org
Subject:   MIDI keyboard Evolution MK-361C and FreeBSD
Message-ID:  <opr27if9k2w41ezb@smtp.hotpop.com>

next in thread | raw e-mail | index | archive | help
Hi. I like to play piano sometimes and all I need is a combination of 
keyboard->softsynth->speakers. I have a midi keyboard you see in subject 
of this email. It has a midi controller implemented to it, but this, I 
think, don't matter. It can be connected via game port or USB. On a distro 
CD I have drivers for Windows and Mac OS X. I also had no problems using 
it with ALSA drivers on Linux. By the way, is there something like ALSA 
for FBSD? Since I started working on FBSD I just can't think about else 
operating systems. And all my troubles with it were ALL successfuly solved 
by mailing lists! Thank you very much for it.

Well, please, describe the way of configuration for I could get my 
keyboard working.

Here goes the data:

1) FreeBSD-RELEASE 4.9
2) When I connect the keyboard to USB I get:

uaudio0: audio descriptors make no sense, error=4
device_probe_and_attach: uaudio0 attach returned 6
ugen0: Evolution Electronics Ltd. MK-361C USB MIDI keyboard, rev 
1.00/2.52, addr 2

3) dmesg (you can get info about my soundcards. Maybe some kernel changes 
needed):

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #3: Mon Feb  9 13:16:23 MSK 2004
     breath@breath.breath.home:/usr/obj/usr/src/sys/Y20040205
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1008051013 Hz
CPU: Intel Celeron (1008.05-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134152192 (131008K bytes)
avail memory = 126160896 (123204K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdb10
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 
0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on 
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 
at device 7.5 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
pcm1: <Crystal Semiconductor CS4281> mem 
0xd8000000-0xd800ffff,0xd8010000-0xd8010fff irq 10 at device 10.0 on pci0
pcm1: <Cirrus Logic CS4297 AC97 Codec>
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 19092MB <ST320410A> [38792/16/63] at ata0-master UDMA100
ad2: 4112MB <SAMSUNG SV0432D> [8912/15/63] at ata1-master UDMA66
acd0: CDROM <ASUS CD-S520/A> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a

I use the Crystal sound card usually.

I hope that's enough.

Best regards, Yuri.
(CC to me please)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opr27if9k2w41ezb>