Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 6 Feb 2004 15:34:53 +0100
From:      Bernd Walter <ticso@cicely12.cicely.de>
To:        Eric Anderson <anderson@centtech.com>
Cc:        Julian Elischer <julian@elischer.org>
Subject:   Re: EHCI USB MFC?
Message-ID:  <20040206143452.GN44313@cicely12.cicely.de>
In-Reply-To: <4023A2DC.8090900@centtech.com>
References:  <Pine.BSF.4.21.0402042239310.8277-100000@InterJet.elischer.org> <200402051839.43204.doconnor@gsoft.com.au> <20040205143724.GB44313@cicely12.cicely.de> <200402061035.02681.doconnor@gsoft.com.au> <40230763.5010304@centtech.com> <20040206121350.GJ44313@cicely12.cicely.de> <4023A2DC.8090900@centtech.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 06, 2004 at 08:21:16AM -0600, Eric Anderson wrote:
> Bernd Walter wrote:
> >>
> >>Just for "me too" sake, I am also having the same types (or similar 
> >>anyway) of issues.
> >>
> >>Let me know if anyone wants some debug info from my setup as well.
> >
> >
> >Well a short description of your problem + dmesg output from your
> >controller and other usb devices is a good start.
> >
> 
> I posted this back in December, but just to reiterate:
> 
> Basically, this is what I get when using a Sandisk 256mb USB flash 
> drive.  (sorry for any odd wrapping) This is on a Dell Latitude D600.
> 
> Dec  2 16:47:28 neutrino kernel: ehci0: <EHCI (generic) USB 2.0 
> controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0
> Dec  2 16:47:28 neutrino kernel: ehci0: (New EHCI DeviceId=0x24cd8086)
> Dec  2 16:47:28 neutrino kernel: ehci_pci_attach: companion usb0
> Dec  2 16:47:28 neutrino kernel: ehci_pci_attach: companion usb1
> Dec  2 16:47:28 neutrino kernel: ehci_pci_attach: companion usb2
> Dec  2 16:47:28 neutrino kernel: usb3: EHCI version 1.0
> Dec  2 16:47:28 neutrino kernel: usb3: companion controllers, 2 ports 
> each: usb0 usb1 usb2
> Dec  2 16:47:28 neutrino kernel: usb3: <EHCI (generic) USB 2.0 
> controller> on ehci0
> Dec  2 16:47:28 neutrino kernel: usb3: USB revision 2.0
> Dec  2 16:47:28 neutrino kernel: uhub3: (0x8086) EHCI root hub, class 
> 9/0, rev 2.00/1.00, addr 1
> Dec  2 16:47:28 neutrino kernel: uhub3: 6 ports with 6 removable, self 
> powered
> 
> and here's what happens when I plug in the memory stick:
> Dec  2 16:48:43 neutrino kernel: usb3: unrecoverable error, controller 
> halted
> Dec  2 16:48:43 neutrino kernel: usb3: blocking intrs 0x10
> Dec  2 16:49:08 neutrino kernel: usb3: port reset timeout

Can you please show complete boot -v output.

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso@bwct.de                                  info@bwct.de



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040206143452.GN44313>