Date: Wed, 27 Sep 2006 00:27:40 +0200 From: Lars Engels <lars.engels@0x20.net> To: current@freebsd.org Subject: Atheros PCCard recognized, IRQ Problem? Message-ID: <20060926222740.GF6216@e.0x20.net>
next in thread | raw e-mail | index | archive | help
--gneEPciiIl/aKvOT
Content-Type: multipart/mixed; boundary="8vCeF2GUdMpe9ZbK"
Content-Disposition: inline
--8vCeF2GUdMpe9ZbK
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hello,
when I insert a Netgear WAG511 Atheros-based PCCard into my notebook,
the speakers crackle two times and nothing else happens.
dmesg does not show anything. The card itself is works in Windows and
used to work in another FreeBSD notebook. The PCCard Bus is also
functioning, a wi(4) card is recognized and can be used.
Searching the web and mailing list archives didn't show a similar issue.
Could it be an IRQ or ACPI issue?
I use a current with today's sources and attached you find the output of
dmesg with the atheros card inserted, as well as vmstat -i output and
pciconf -lv.
Any help is appreciated. Thank you in advance!
--=20
Lars Engels
E-Mail: lars.engels@0x20.net =09
Mobil: +49 172 266 72 73
--8vCeF2GUdMpe9ZbK
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename="dmesg.boot"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #7: Tue Sep 26 18:00:51 CEST 2006
lars@maggie.bsd-geek.de:/usr/obj/usr/src/sys/MAGGIE
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <INTEL CALISTGA>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1662.51-MHz 686-class=
CPU)
Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8
Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0xc189<SSE3,MON,EST,TM2,XTPR,<b15>>
AMD Features=3D0x100000<NX>
Cores per package: 2
real memory =3D 1063845888 (1014 MB)
avail memory =3D 1031749632 (983 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI-0390: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
ACPI-0390: *** Info: Table [DSDT] replaced by host OS
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD Capell00> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd8100000-0xd817f=
fff,0xc0000000-0xcfffffff,0xd8200000-0xd823ffff irq 16 at device 2.0 on pci0
drm0: <Intel i945GM> on vgapci0
error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize A=
GP.
device_attach: drm0 attach returned 12
vgapci1: <VGA-compatible display> mem 0xd8180000-0xd81fffff at device 2.1 o=
n pci0
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xd4000000-0xd4000fff irq 16 at d=
evice 0.0 on pci2
channel 1 pwr1 0x0060 pwr2 0x005e
channel 2 pwr1 0x0068 pwr2 0x0064
channel 3 pwr1 0x0099 pwr2 0x009a
channel 4 pwr1 0x0092 pwr2 0x0096
channel 5 pwr1 0x0000 pwr2 0x0000
channel 6 pwr1 0x0082 pwr2 0x0082
channel 7 pwr1 0x0082 pwr2 0x0083
channel 8 pwr1 0x007d pwr2 0x007d
channel 9 pwr1 0x007d pwr2 0x007d
channel 10 pwr1 0x0000 pwr2 0x0000
channel 11 pwr1 0xfffb pwr2 0xfffb
channel 12 pwr1 0x0001 pwr2 0x0001
channel 13 pwr1 0xfffb pwr2 0xfffb
channel 14 pwr1 0x0001 pwr2 0x0001
wpi0: Ethernet address: 00:13:02:3f:0d:e4
wpi0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device =
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device =
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device =
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device =
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd8444000-0xd84443f=
f irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
usb4: handing over full speed device on port 5 to usb2
uhub4: port 5, device disappeared after reset
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd8000000-0xd8001fff irq 22 =
at device 5.0 on pci5
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:00:f0:7f:da:00
bfe0: [GIANT-LOCKED]
cbb0: <RF5C476 PCI-CardBus Bridge> at device 9.0 on pci5
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C552> mem 0xd8002000-0xd80027ff at device 9.1 on pci5
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:f0:41:20:0f:ab:79
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:f0:0f:ab:79
fwe0: Ethernet address: 02:00:f0:0f:ab:79
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
pci5: <base peripheral> at device 9.2 (no driver attached)
pci5: <base peripheral> at device 9.3 (no driver attached)
pci5: <base peripheral> at device 9.4 (no driver attached)
pci5: <base peripheral> at device 9.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177=
,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <Broadcom Corp Foxconn Bluetooth 2.0 plus EDR, class 224/1, rev 2.00=
/1.00, addr 2> on uhub2
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, =
default to accept, logging disabled
ad0: 69042MB <HTS541080G9AT00 MB4OA60A> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/SC01> at ata0-slave UDMA33
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 1 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D SC01> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
Trying to mount root from ufs:/dev/ad0s3a
setting h/w config 1200
microcode alive notification version 10d00 alive 1
temperature -192
scan finished
rx tail flags error 702
scan finished
wpi0: fatal firmware error
wpi0: timeout resetting Rx ring
setting h/w config 1200
microcode alive notification version 10d00 alive 1
temperature -195
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
rx tail flags error 702
--8vCeF2GUdMpe9ZbK
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=vmstat-i
interrupt total rate
irq1: atkbd0 3360 2
irq9: acpi0 1296 0
irq12: psm0 16636 12
irq14: ata0 8030 5
irq16: wpi0 uhci3 32488 23
irq18: uhci2 1 0
irq20: cbb0 4 0
irq21: fwohci0 1 0
irq22: pcm0 bfe0 2 0
irq23: uhci0 ehci0 1 0
cpu0: timer 2733760 1999
cpu1: timer 2723846 1992
Total 5519425 4037
--8vCeF2GUdMpe9ZbK
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=pciconf-lv
hostb0@pci0:0:0: class=0x060000 card=0xc504144d chip=0x27a08086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:2:0: class=0x030000 card=0xc504144d chip=0x27a28086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
vgapci1@pci0:2:1: class=0x038000 card=0xc504144d chip=0x27a68086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
class = display
pcm0@pci0:27:0: class=0x040300 card=0xc504144d chip=0x27d88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) High Definition Audio'
class = multimedia
pcib1@pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib2@pci0:28:1: class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0xc504144d chip=0x27c88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0xc504144d chip=0x27c98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0xc504144d chip=0x27ca8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:29:3: class=0x0c0300 card=0xc504144d chip=0x27cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:29:7: class=0x0c0320 card=0xc504144d chip=0x27cc8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib3@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0xc504144d chip=0x27b98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0xc504144d chip=0x27df8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
none0@pci0:31:3: class=0x0c0500 card=0xc504144d chip=0x27da8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
wpi0@pci2:0:0: class=0x028000 card=0x10018086 chip=0x42228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = network
bfe0@pci5:5:0: class=0x020000 card=0xc504144d chip=0x170c14e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM440x 100Base-TX Fast Ethernet'
class = network
subclass = ethernet
cbb0@pci5:9:0: class=0x060700 card=0xc504144d chip=0x04761180 rev=0xb4 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 CardBus Controller'
class = bridge
subclass = PCI-CardBus
fwohci0@pci5:9:1: class=0x0c0010 card=0xc024144d chip=0x05521180 rev=0x09 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'RL5c552 IEEE-1394 Controller'
class = serial bus
subclass = FireWire
none1@pci5:9:2: class=0x080500 card=0xc024144d chip=0x08221180 rev=0x18 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'SD Bus Host Adapter'
class = base peripheral
none2@pci5:9:3: class=0x088000 card=0xc024144d chip=0x08431180 rev=0x00 hdr=0x00
vendor = 'Ricoh Co Ltd'
class = base peripheral
none3@pci5:9:4: class=0x088000 card=0xc024144d chip=0x05921180 rev=0x09 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'Memory Stick Bus Host Adapter'
class = base peripheral
none4@pci5:9:5: class=0x088000 card=0xc024144d chip=0x08521180 rev=0x04 hdr=0x00
vendor = 'Ricoh Co Ltd'
class = base peripheral
--8vCeF2GUdMpe9ZbK--
--gneEPciiIl/aKvOT
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (FreeBSD)
iD8DBQFFGalcKc512sD3afgRAopGAKC0neigHv1slK+vpYGH4JByHV47dACcDHZW
5/6yNDDsM97Ne4yp3E0n9DU=
=pcu/
-----END PGP SIGNATURE-----
--gneEPciiIl/aKvOT--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060926222740.GF6216>