Date: Thu, 27 Mar 2008 20:47:12 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Danny Braniss <danny@cs.huji.ac.il> Cc: freebsd-stable@freebsd.org Subject: Re: Marvell Technology Group Ltd. Yukon EC Ultra Message-ID: <20080327114712.GB95274@cdnetworks.co.kr> In-Reply-To: <E1JeqLf-000EDk-0z@cs1.cs.huji.ac.il> References: <E1JeqLf-000EDk-0z@cs1.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Mar 27, 2008 at 01:32:46PM +0200, Danny Braniss wrote: > > On Thu, Mar 27, 2008 at 12:57:31PM +0200, Danny Braniss wrote: > > > Hi, > > > Under load, the msk has problems, with hw.msk.legacy_intr=1 and 0. > > > with = 1, i get > > > TCP segementation error > > > watchdog timeout > > > with = 0, > > > Tx MAC parity error > > > watchdog timeout > > > > > > > Would you show me verbosed boot messages related with msk(4)/e1000phy(4)? > > > mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xc800-0xc8ff mem > 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci1 > mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeafc000 > mskc0: MSI count : 1 > mskc0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 256 to vector 52 > mskc0: using IRQ 256 for MSI > mskc0: RAM buffer size : 128KB > mskc0: Port 0 : Rx Queue 85KB(0x00000000:0x000153ff) > mskc0: Port 0 : Tx Queue 43KB(0x00015400:0x0001ffff) > msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 > msk0: bpf attached > msk0: Ethernet address: 00:1e:8c:6d:5c:fe > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto > mskc0: [MPSAFE] > mskc0: [FILTER] > > is this enough? Yes, it seems that 88E8056/88E1149 PHY has several issues. I recall that there had been several reports for this issue. Since nfe(4) with 88E1149 also have some stability issues, e1000phy(4) has lack of required code for 88E1149 PHY. Up to date, I couldn't find a clue, sorry. I'll let you know if I have a code to give it spin. > danny > > > > the board is a Asus P5K-VM > > > > > > Cheers, > > > danny > > > > > > > > > > -- > > Regards, > > Pyun YongHyeon > > -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080327114712.GB95274>