Date: Mon, 5 Aug 2002 13:00:21 -0700 (PDT) From: Larry Rosenman <ler@lerctr.org> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/41348: /dev/acd0c: Device not configured Message-ID: <200208052000.g75K0LwO055618@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/41348; it has been noted by GNATS. From: Larry Rosenman <ler@lerctr.org> To: Dirk Meyer <dirk.meyer@dinoex.sub.org> Cc: FreeBSD-gnats-submit@FreeBSD.ORG Subject: Re: kern/41348: /dev/acd0c: Device not configured Date: 05 Aug 2002 14:48:10 -0500 --=-KgW4LamjuglIV3PXyeyT Content-Type: text/plain Content-Transfer-Encoding: 7bit get the NEW makedev, I.E. run mergemaster to pick up the new MAKEDEV script. Yours is out of date. I attached my current one from 4.6-STABLE. On Mon, 2002-08-05 at 14:39, Dirk Meyer wrote: > Larry Rosenman schrieb:, > > > check that /dev/acd0c and /dev/acd0a have the same major and minor > > numbers. > > $ MAKEDEV all > # ls -l /dev/acd0c /dev/acd0a > crw-r----- 2 root operator 117, 0 Aug 5 21:32 /dev/acd0a > crw-r----- 2 root operator 117, 2 Aug 5 21:32 /dev/acd0c > > > Please read UPDATING. > > I read it daily ... > but I only found this entry: > > > 20020318: > > The ata(4) driver has been updated from the version in -CURRENT. > > As a result, some device nodes in /dev have changed; it will be > > necessary to update MAKEDEV and re-make the device nodes. > > mergemaster(8) will offer to do this as a part of its upgrade > > procedure. > > # man ata > gives no clue either... > > Is /dev/acd0c now invalid? > THis sould be documented somewhere. > > kind regards Dirk > > - Dirk Meyer, Im Grund 4, 34317 Habichtswald, Germany > - [dirk.meyer@dinoex.sub.org],[dirk.meyer@guug.de],[dinoex@FreeBSD.org] -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: ler@lerctr.org US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 --=-KgW4LamjuglIV3PXyeyT Content-Disposition: attachment; filename=MAKEDEV Content-Transfer-Encoding: quoted-printable Content-Type: text/x-sh; name=MAKEDEV; charset=ISO-8859-1 #!/bin/sh - # # Copyright (c) 1990 The Regents of the University of California. # All rights reserved. # # Written and contributed by W. Jolitz 12/90 # # Redistribution and use in source and binary forms are permitted provided # that: (1) source distributions retain this entire copyright notice and # comment, and (2) distributions including binaries display the following # acknowledgement: ``This product includes software developed by the # University of California, Berkeley and its contributors'' in the # documentation or other materials provided with the distribution and in # all advertising materials mentioning features or use of this software. # Neither the name of the University nor the names of its contributors may # be used to endorse or promote products derived from this software without # specific prior written permission. # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. # # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.47 2002/04/21 19:47:06 will Exp $ # # Device "make" file. Valid arguments: # all makes all known devices, standard number of units (or close) # std standard devices # jail suitable for a jail(8) # local configuration specific devices # mach-4 mach4&lites+devices for Mach's XFree86 distribution # (see http://www.cs.hut.fi/lites.html for more info on LITES) # # Tapes: # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape # sa* SCSI Sequential Access Devices # # Disks: # aac* Adaptec FSA RAID controllers # aacd* Adaptec FSA RAID # acd* ATAPI CD-ROM disks # amrd* AMI MegaRAID # cd* SCSI CD-ROM disks # da* SCSI Direct Access Devices # fd* floppy disk drives (3 1/2", 5 1/4") # fla* M-Systems DiskOnChip # idad* Compaq Smart-2 RAID arrays # matcd* Matsushita (Panasonic) CD-ROM disks # mcd* Mitsumi CD-ROM disks # md* Memory (or malloc) disk # mlx* Mylex DAC960 RAID controllers # mlxd* Mylex DAC960 RAID disk volumes # scd* Sony CD-ROM disks # vn* vnode disks # wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...) # wfd* IDE floppy disk drives (LS-120) # # Console ports: # vty* virtual console devices for syscons/pcvt/codrv # # Pointing devices: # mse* Logitech and ATI Inport bus mouse # psm* PS/2 mouse # jogdial Sony VAIO Jogdial # sysmouse Mousesystems mouse emulator for syscons # # Time devices: # refclock-* serial ports used by xntpd parse refclocks # # Terminal ports: # tty* general purpose serial ports # cua* dialout serial ports # ttyA* Specialix SI/XIO dialin ports ('*' =3D number of devices) # cuaA* Specialix SI/XIO dialout ports # ttyD* Digiboard - 16 dialin ports # cuaD* Digiboard - 16 dialout ports # ttyE* Stallion EasyIO (stl) dialin ports # cuaE* Stallion EasyIO (stl) dialout ports # ttyF* Stallion Brumby (stli) dialin ports # cuaF* Stallion Brumby (stli) dialout ports # ttyR* Rocketport dialin ports # cuaR* Rocketport dialout ports # # stlN Stallion EasyIO board N dialin and dialout # stliN Stallion Brumby board N dialin and dialout # # Pseudo terminals: # pty* set of 32 master and slave pseudo terminals # vty* virtual terminals using syscons/pcvt/codrv console # # Parallel port: # lpt* Printer # ppi* Parallel port i/o # pps* Pulse per second timing interface # pcfclock* Parallel time sync interface # # I2C and SMBus: # iic* I2C devices # smb* SMBUS devices # # USB devices: # usb* USB bus control device # ugen* generic USB device # uhid* Human Interface Device (HID) # ulpt* printer # umodem* modems # ums* mouse # urio* Diamond Rio 500 # uscanner* USB scanners # usio* USB serial devices # # SCSI devices (other than CD-ROM, tape and disk): # ch* SCSI Media-Changer (juke box) driver # pt* Processor Type (HP scanner, as one example) # pass* CAM Passthrough device # ses* SES (SCSI Environmental Services) and # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device # # PC-CARD (previously called PCMCIA) support # card* PC-CARD slots # # ISDN devices: # i4b isdnd call control device # i4bctl debugging control device # i4btrc* trace data interface(s), one per passive card # i4btel* telephony interface(s) # i4bteld* telephony dialout interface(s) # i4brbch* raw b channel access device(s) # # Special purpose devices: # apm Advanced Power Management BIOS # apmctl APM BIOS control device # bpf* packet filter # speaker pc speaker # tw* xten power controller # snd* various sound cards # pcaudio PCM audio driver # socksys iBCS2 socket system driver # vat VAT compatibility audio driver (requires snd*) # gsc Genius GS-4500 hand scanner # joy pc joystick # tun* Tunneling IP device # tap* Ethernet Tunneling device # snp* tty snoop devices # spigot Video Spigot video acquisition card # ctx* Cortex-I video acquisition card # meteor* Matrox Meteor video acquisition card (pci) # bktr* Bt848 based video acquisition card (pci) # labpc* National Instrument's Lab-PC and LAB-PC+ # perfmon CPU performance-monitoring counters # pci PCI configuration-space access from user mode # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth) # kbd keyboard devices # agpgart AGP interface # cfs* Coda Distributed Filesystem # nsmb* SMB/CIFS protocol interface # if [ -n "$MAKEDEVPATH" ]; then PATH=3D"$MAKEDEVPATH" else PATH=3D/sbin:/bin fi umask 77 # Usage: die exitcode msg die() { echo $2 exit $1 } # Convert integer to partition name dkitop() { local p case $1 in 0) p=3Da;; 1) p=3Db;; 2) p=3Dc;; 3) p=3Dd;; 4) p=3De;; 5) p=3Df;; 6) p=3Dg= ;; 7) p=3Dh;; *) p=3D"?";; esac echo $p } # Convert integer to slice name dkitos() { local s case $1 in 0) s=3D"";; 1) s=3D"";; *) s=3Ds$(($1-1));; esac echo $s } # Convert disk (type, unit, slice, partition) to minor number dkminor() { echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4)) } # Override mknod(2) to add extra handling to it. mknod=3D/sbin/mknod for i in `IFS=3D':'; echo $PATH`; do if [ -x "${i}/mknod" ]; then mknod=3D"${i}/mknod" break fi done mknod() { rm -f "$1" || exit 1 case $# in 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";; 5) "$mknod" "$@" || die 2 "$mknod $@ failed";; *) die 2 "bad node: mknod $@";; esac } # Convert tape (ctrl, unit, mode, access) to minor number saminor() { echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4)) } # Convert the last character of a tty name to a minor number. ttyminor() { case $1 in [0-9]) m=3D$1;; a) m=3D10;; b) m=3D11;; c) m=3D12;; d) m=3D13;; e) m=3D14;; f) m=3D15;; g)= m=3D16;; h) m=3D17;; i) m=3D18;; j) m=3D19;; k) m=3D20;; l) m=3D21;; m) m=3D22;; n)= m=3D23;; o) m=3D24;; p) m=3D25;; q) m=3D26;; r) m=3D27;; s) m=3D28;; t) m=3D29;; u)= m=3D30;; v) m=3D31;; *) m=3D"?";; esac echo $m } # Convert a unit number to a minor number. unit2minor() { echo $(((($1 >> 8) << 16) | ($1 % 256))) } # For the stallion devices tty[EF] # stallion major letter card iscallout stallion () { major=3D$1 letter=3D$2 card=3D$3 iscallout=3D$4 port=3D0 maxport=3D8 pref=3Dtty owner=3D minorbase=3D0 if [ $iscallout -gt 0 ]; then pref=3Dcua owner=3Duucp:dialer minorbase=3D128 fi case "$card" in=20 [0-7]);; *) die 1 "Invalid stl card number $card";; esac # make the mem interface for extracting stats & loading microcode. # 0x1000000 + card number mknod staliomem$card c $major 0x0100000$card while [ $port -lt $maxport ]; do minor=3D$(($minorbase + $card * 1048576 + $port)) if [ $port -ge 32 ]; then minor=3D$(($minor + 65504)) fi unit=3D$(($card * 64 + $port)) mknod ${pref}${letter}$unit c $major $minor $owner mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner port=3D$(($port + 1)) done } # Raw partition for disks dkrawpart=3D2 # Compatibility slice for disks dkcompatslice=3D0 # Raw slice for disks dkrawslice=3D1 # Standard umasks disk_umask=3D037 # allow group operator to read disks tape_umask=3D017 # allow group operator to read/write tapes for i in $*; do case $i in all) sh MAKEDEV std # standard sh MAKEDEV fd0 fd1 # bdev, floppy disk sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk sh MAKEDEV ata # cdev, ATA control sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs sh MAKEDEV vn0 # bdev, virtual disk sh MAKEDEV cd0 matcd0 mcd0 scd0 # bdev, cdrom sh MAKEDEV sa0 wt0 # bdev, tape sh MAKEDEV vty12 # cdev, virtual tty sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty sh MAKEDEV pty0 # cdev, pseudo tty sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty sh MAKEDEV zs0 # big-Alpha serial tty sh MAKEDEV kbd0 kbd1 # cdev, keyboard sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse sh MAKEDEV pcaudio speaker snd0 # cdev, noise sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port sh MAKEDEV iic0 iic1 # cdev, I2C device sh MAKEDEV smb0 smb1 # cdev, SMBus device sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop sh MAKEDEV pass4 xpt2 # cdev, CAM sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN sh MAKEDEV agpgart # cdev, AGP sh MAKEDEV nsmb0 # cdev, SMB/CIFS ;; # a much restricted set of the above, to save precious i-nodes on the # fixit floppy fixit) sh MAKEDEV std # standard sh MAKEDEV fd0 # bdev, floppy disk sh MAKEDEV da0 # bdev, SCSI disk sh MAKEDEV ad0 # bdev, ATA disk sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices sh MAKEDEV wd0 # bdev, OLD disk sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs sh MAKEDEV vn0 # bdev, virtual disk sh MAKEDEV cd0 # bdev, cdrom sh MAKEDEV sa0 # bdev, tape sh MAKEDEV vty2 # cdev, virtual tty sh MAKEDEV cuaa0 # cdev, serial tty sh MAKEDEV pty0 # cdev, pseudo tty sh MAKEDEV ttyd0 # cdev, serial tty sh MAKEDEV zs0 # big-Alpha serial tty sh MAKEDEV kbd0 # cdev, keyboard sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse sh MAKEDEV lpt0 # cdev, printer sh MAKEDEV ppi0 # cdev, parallel port sh MAKEDEV iic0 # cdev, I2C device sh MAKEDEV smb0 # cdev, SMBus device sh MAKEDEV ums0 # cdev, USB devices sh MAKEDEV tun0 # cdev, network sh MAKEDEV tap0 # cdev, network sh MAKEDEV ch0 # cdev, miscellaneous sh MAKEDEV apm apmctl card0 # cdev, laptop sh MAKEDEV pass1 xpt1 # cdev, CAM sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN sh MAKEDEV i4brbch0 # cdev, ISDN rm -f fd/[1-9]? ;; std) mknod console c 0 0; chmod 600 console mknod kmem c 2 1 root:kmem; chmod 640 kmem mknod mem c 2 0 root:kmem; chmod 640 mem mknod null c 2 2; chmod 666 null mknod random c 2 3; chmod 644 random mknod urandom c 2 4; chmod 644 urandom mknod zero c 2 12; chmod 666 zero mknod io c 2 14; chmod 600 io mknod tty c 1 0; chmod 666 tty mknod klog c 7 0; chmod 600 klog mknod stdin c 22 0; chmod 666 stdin mknod stdout c 22 1; chmod 666 stdout mknod stderr c 22 2; chmod 666 stderr mknod pci c 78 0; chmod 644 pci mkdir -p fd (cd fd && i=3D0 && while [ $i -lt 64 ]; do mknod $i c 22 $i i=3D$(($i + 1)) done ) chmod 555 fd chmod 666 fd/* ;; jail) sh MAKEDEV std pty0 rm mem kmem pci io klog console # for security ln -sf null mem # for libkvm (ab)users ln -sf null kmem # --//-- ln -sf null console ;; mach-4) mknod iopl c 22 0 mknod kbd c 23 0 mknod mouse c 24 0 mknod time c 25 0 mknod timezone c 26 0 ;; # Create device files for new Archive/Wangtek QIC-02 tape driver (vak) wt*) umask $tape_umask u=3D`expr $i : '..\(.*\)'` if [ -z "${u}" ]; then u=3D0; fi # default density, 512b blocks mknod rwt${u} c 10 $(( 0 + $u)) root:operator mknod nrwt${u} c 10 $(( 4 + $u)) root:operator # default density, 1024b blocks # mknod rWt${u} c 10 $((64 + $u)) root:operator # mknod nrWt${u} c 10 $((68 + $u)) root:operator mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes mknod nrwt${u}b c 10 $((20 + $u)) root:operator mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes mknod nrwt${u}c c 10 $((28 + $u)) root:operator mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes mknod nrwt${u}d c 10 $((36 + $u)) root:operator # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes? # mknod nrwt${u}e c 10 $((44 + $u)) root:operator # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes? # mknod nrwt${u}f c 10 $((52 + $u)) root:operator umask 77 ;; # Individual slices. aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*= s*|vn*s*|wd*s*|wfd*s*) umask $disk_umask case $i in aacd*s*) name=3Daacd; chr=3D151;; ad*s*) name=3Dad; chr=3D116;; ar*s*) name=3Dar; chr=3D157;; afd*s*) name=3Dafd; chr=3D118;; amrd*s*) name=3Damrd; chr=3D133;; da*s*) name=3Dda; chr=3D13;; fla*s*) name=3Dfla; chr=3D102;; idad*s*) name=3Didad; chr=3D109;; md*s*) name=3Dmd; chr=3D95;; mlxd*s*) name=3Dmlxd; chr=3D131;; twed*s*) name=3Dtwed; chr=3D147;; vn*s*) name=3Dvn; chr=3D43;; wd*s*) name=3Dwd; chr=3D3;; wfd*s*) name=3Dwfd; chr=3D87;; esac case $i in aacd*s*|amrd*s*|idad*s*|mlxd*s*|twed*s*) unit=3D`expr $i : '....\([0-9]*\)s'` slice=3D`expr $i : '....[0-9]*s\([0-9]*\)'` part=3D`expr $i : '....[0-9]*s[0-9]*\(.*\)'` ;; afd*s*|fla*s*|wfd*s*) unit=3D`expr $i : '...\([0-9]*\)s'` slice=3D`expr $i : '...[0-9]*s\([0-9]*\)'` part=3D`expr $i : '...[0-9]*s[0-9]*\(.*\)'` ;; *) unit=3D`expr $i : '..\([0-9]*\)s'` slice=3D`expr $i : '..[0-9]*s\([0-9]*\)'` part=3D`expr $i : '..[0-9]*s[0-9]*\(.*\)'` ;; esac case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) case $slice in [0-9]|[1-2][0-9]|30) oldslice=3D$slice slice=3D$(($slice+1)) slicename=3D`dkitos $slice` minor=3D`dkminor 0 $unit $slice $dkrawpart` mknod $name$unit$slicename c $chr $minor root:operator ln -f $name$unit$slicename r$name$unit$slicename case $part in [a-h]) case $oldslice in 0) slice=3D$oldslice ;; esac for part in 0 1 2 3 4 5 6 7 do minor=3D`dkminor 0 $unit $slice $part` partname=3D`dkitop $part` mknod $name$unit$slicename$partname \ c $chr $minor root:operator ln -f $name$unit$slicename$partname \ r$name$unit$slicename$partname done ;; "") ;; *) echo bad partition for disk in: $i ;; esac ;; *) echo bad slice for disk in: $i ;; esac ;; *) echo bad unit for disk in: $i "(unit=3D$unit, slice=3D$slice, part=3D$par= t)" ;; esac umask 77 ;; fd*) umask $disk_umask unit=3D`expr $i : '..\(.*\)'` name=3Dfd; chr=3D9 case $unit in 0|1|2|3) mknod ${name}${unit} c $chr $(($unit * 64)) root:operator ln -f ${name}${unit} r${name}${unit} # Fake BSD partitions for i in a b c d e f g h do ln -f ${name}${unit} ${name}${unit}$i ln -f r${name}${unit} r${name}${unit}$i done # User-readable and programmer-readable name sets mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \ root:operator ln -f ${name}${unit}.1720 r${name}${unit}.1720 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21 # ln -f r${name}${unit}.1720 r${name}${unit}135hs21 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \ root:operator ln -f ${name}${unit}.1480 r${name}${unit}.1480 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18 # ln -f r${name}${unit}.1480 r${name}${unit}135hs18 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18 # ln -f r${name}${unit}.1480 r${name}${unit}96hs18 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \ root:operator ln -f ${name}${unit}.1440 r${name}${unit}.1440 # ln -f ${name}${unit}.1440 ${name}${unit}135 # ln -f r${name}${unit}.1440 r${name}${unit}135 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18 # ln -f r${name}${unit}.1440 r${name}${unit}135ds18 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18 # ln -f r${name}${unit}.1440 r${name}${unit}96ds18 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \ root:operator ln -f ${name}${unit}.1200 r${name}${unit}.1200 # ln -f ${name}${unit}.1200 ${name}${unit}96 # ln -f r${name}${unit}.1200 r${name}${unit}96 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15 # ln -f r${name}${unit}.1200 r${name}${unit}96ds15 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15 # ln -f r${name}${unit}.1200 r${name}${unit}135ds15 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \ root:operator ln -f ${name}${unit}.820 r${name}${unit}.820 # ln -f ${name}${unit}.820 ${name}${unit}96hs10 # ln -f r${name}${unit}.820 r${name}${unit}96hs10 # ln -f ${name}${unit}.820 ${name}${unit}135hs10 # ln -f r${name}${unit}.820 r${name}${unit}135hs10 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \ root:operator ln -f ${name}${unit}.800 r${name}${unit}.800 # ln -f ${name}${unit}.800 ${name}${unit}96ds10 # ln -f r${name}${unit}.800 r${name}${unit}96ds10 # ln -f ${name}${unit}.800 ${name}${unit}135ds10 # ln -f r${name}${unit}.800 r${name}${unit}135ds10 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \ root:operator ln -f ${name}${unit}.720 r${name}${unit}.720 # ln -f ${name}${unit}.720 ${name}${unit}96ds9 # ln -f r${name}${unit}.720 r${name}${unit}96ds9 # ln -f ${name}${unit}.720 ${name}${unit}135ds9 # ln -f r${name}${unit}.720 r${name}${unit}135ds9 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \ root:operator ln -f ${name}${unit}.360 r${name}${unit}.360 # ln -f ${name}${unit}.360 ${name}${unit}48 # ln -f r${name}${unit}.360 r${name}${unit}48 # ln -f ${name}${unit}.360 ${name}${unit}48ds9 # ln -f r${name}${unit}.360 r${name}${unit}48ds9 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \ root:operator ln -f ${name}${unit}.640 r${name}${unit}.640 # ln -f ${name}${unit}.640 ${name}${unit}96ds8 # ln -f r${name}${unit}.640 r${name}${unit}96ds8 # ln -f ${name}${unit}.640 ${name}${unit}135ds8 # ln -f r${name}${unit}.640 r${name}${unit}135ds8 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \ root:operator ln -f ${name}${unit}.1232 r${name}${unit}.1232 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8 # ln -f r${name}${unit}.1232 r${name}${unit}96ds8 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8 # ln -f r${name}${unit}.1232 r${name}${unit}135ds8 ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|vn*|wd*|wfd*) umask $disk_umask case $i in aacd*) name=3Daacd; chr=3D151;; ad*) name=3Dad; chr=3D116;; ar*) name=3Dar; chr=3D157;; afd*) name=3Dafd; chr=3D118;; amrd*) name=3Damrd; chr=3D133;; da*) name=3Dda; chr=3D13;; fla*) name=3Dfla; chr=3D102;; idad*) name=3Didad; chr=3D109;; md*) name=3Dmd; chr=3D95;; mlxd*) name=3Dmlxd; chr=3D131;; twed*) name=3Dtwed; chr=3D147;; vn*) name=3Dvn; chr=3D43;; wd*) name=3Dwd; chr=3D3;; wfd*) name=3Dwfd; chr=3D87;; esac case $i in aacd*|amrd*|idad*|mlxd*|twed*) unit=3D`expr $i : '....\(.*\)'` ;; afd*|fla*|wfd*) unit=3D`expr $i : '...\(.*\)'` ;; *) unit=3D`expr $i : '..\(.*\)'` ;; esac case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) for slicepartname in s0h s1h s2 s3 s4 do sh MAKEDEV $name$unit$slicepartname done ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; ccd*) umask $disk_umask name=3Dccd chr=3D74 unit=3D`expr $i : '...\(.*\)'` case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) for part in 0 1 2 3 4 5 6 7 do minor=3D`dkminor 0 $unit 0 $part` partname=3D`dkitop $part` mknod $name$unit$partname c $chr $minor root:operator ln -f $name$unit$partname r$name$unit$partname done ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; # SCSI processor type driver pt[0-9]*) chr=3D61 name=3Dpt unit=3D`expr $i : 'pt\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then unit=3D0 fi unit=3D$(($unit + 1 - 1)) mknod ${name}${unit} c $chr `unit2minor $unit` ;; # SCSI SES/SAF-TE type driver ses[0-9]*) chr=3D110 name=3Dses unit=3D`expr $i : 'ses\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then unit=3D0 fi unit=3D$(($unit + 1 - 1)) mknod ${name}${unit} c $chr `unit2minor $unit` ;; # SCSI target mode sample driver targ[0-9]*) chr=3D65 name=3Dtarg unit=3D`expr $i : 'targ\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then unit=3D0 fi unit=3D$(($unit + 1 - 1)) mknod ${name}${unit} c $chr `unit2minor $unit` mknod ${name}.ctl c $chr 0xffff00ff ;; # CAM transport layer device xpt*) # This major number is temporary chr=3D104 name=3Dxpt units=3D`expr $i : 'xpt\(.*\)'` if [ -z "${units}" ]; then units=3D1 fi i=3D0 while [ $i -lt $units ]; do dname=3D$name$i rm -rf $dname r$dname mknod $dname c $chr `unit2minor $i` root:operator i=3D$(($i + 1)) done ;; # CAM passthrough device pass*) # This major number is temporary chr=3D31 name=3Dpass units=3D`expr $i : 'pass\(.*\)'` if [ -z "${units}" ]; then units=3D1 fi i=3D0 while [ $i -lt $units ]; do dname=3D$name$i rm -rf $dname r$dname mknod $dname c $chr `unit2minor $i` root:operator i=3D$(($i + 1)) done ;; pty*) class=3D`expr $i : 'pty\(.*\)'` case $class in 0) offset=3D0 name=3Dp;; 1) offset=3D32 name=3Dq;; 2) offset=3D64 name=3Dr;; 3) offset=3D96 name=3Ds;; # Note that xterm (at least) only look at p-s. 4) offset=3D128 name=3DP;; 5) offset=3D160 name=3DQ;; 6) offset=3D192 name=3DR;; 7) offset=3D224 name=3DS;; # This still leaves [tuTU]. *) echo bad unit for pty in: $i;; esac umask 0 case $class in 0|1|2|3|4|5|6|7) i=3D0 while [ $i -lt 32 ]; do # This was an awk substr() before. c=3D$(echo 0123456789abcdefghijklmnopqrstuv | dd bs=3D1 skip=3D$i count=3D1 2>/dev/null) mknod tty$name$c c 5 $(($offset + $i)) mknod pty$name$c c 6 $(($offset + $i)) i=3D$(($i + 1)) done ;; esac umask 77 ;; sa*) umask $tape_umask unit=3D`expr $i : '..\(.*\)'` chr=3D14 case $unit in [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]) mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0` ln -f sa${unit}.ctl rsa${unit}.ctl for m in 0 1 2 3 do mknod sa${unit}.${m} c $chr \ `saminor 0 ${unit} ${m} 0` root:operator ln -f sa${unit}.${m} rsa${unit}.${m} mknod nsa${unit}.${m} c $chr \ `saminor 0 ${unit} ${m} 1` root:operator ln -f nsa${unit}.${m} nrsa${unit}.${m} mknod esa${unit}.${m} c $chr \ `saminor 0 ${unit} ${m} 2` root:operator ln -f esa${unit}.${m} ersa${unit}.${m} done ln -f sa${unit}.0 sa${unit} ln -f sa${unit}.0 rsa${unit}.0 ln -f sa${unit}.0 rsa${unit} ln -f nsa${unit}.0 nsa${unit} ln -f nsa${unit}.0 nrsa${unit}.0 ln -f nsa${unit}.0 nrsa${unit} ln -f esa${unit}.0 esa${unit} ln -f esa${unit}.0 ersa${unit}.0 ln -f esa${unit}.0 ersa${unit} ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; ch*) umask 37 unit=3D`expr $i : '..\(.*\)'` case $i in ch*) name=3Dch; chr=3D17;; esac case $unit in 0|1|2|3|4|5|6) mknod ${name}${unit} c $chr $unit root:operator ;; *) echo bad unit for media changer in: $i ;; esac umask 77 ;; ata) mknod ata c 159 0 root:operator ;; ast*) umask 2 ; unit=3D`expr $i : '...\(.*\)'` chr=3D119 case $unit in 0|1|2|3) mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator chmod 640 ast${unit} mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator chmod 640 nast${unit} ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; acd*t*) umask $disk_umask units=3D`expr $i : '...\(.*\)t'`; tracks=3D`expr $i : '.*t\(.*\)'`; name=3Dacd; chr=3D117; if [ -z "${units}" -o "${units}" -le 0 ]; then units=3D1 fi if [ -z "${tracks}" -o "${tracks}" -le 0 ]; then tracks=3D100 fi if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then i=3D0 while [ $i -le $units ]; do dname=3D$name$i rm -rf ${dname}t* j=3D1 while [ $j -le ${tracks} ]; do mknod ${dname}t$j c $chr \ $((($i * 8) + (65536 * $j))) \ root:operator j=3D$(($j + 1)) done i=3D$(($i + 1)) done else echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks" fi umask 77 ;; acd*|cd*|mcd*|scd*) umask $disk_umask case $i in acd*) units=3D`expr $i : '...\(.*\)'`; name=3Dacd; chr=3D117;; cd*) units=3D`expr $i : '..\(.*\)'`; name=3Dcd; chr=3D15;; mcd*) units=3D`expr $i : '...\(.*\)'`; name=3Dmcd; chr=3D29;; scd*) units=3D`expr $i : '...\(.*\)'`; name=3Dscd; chr=3D45;; esac if [ -z "${units}" -o "${units}" -le 0 ]; then units=3D1 fi if [ "${units}" -le 31 ]; then i=3D0 while [ $i -le $units ]; do dname=3D$name$i rm -rf ${dname}* r${dname}* mknod ${dname}a c $chr $(($i * 8)) root:operator case $name in=20 acd) ln -f ${dname}a ${dname}c;; *) mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;; esac ln -f ${dname}a r${dname}a ln -f ${dname}c r${dname}c i=3D$(($i + 1)) done else echo "$i is invalid -- can't have more than 32 cd devices" fi umask 77 ;; matcd*) umask 2 case $i in matcd*) unit=3D`expr $i : '.....\(.*\)'`; name=3Dmatcd; chr=3D46;; esac case $unit in 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15) mknod ${name}${unit}a c $chr $(($unit * 8 + 0)) \ root:operator mknod ${name}${unit}c c $chr $(($unit * 8 + 2)) \ root:operator ln -f ${name}${unit}a r${name}${unit}a ln -f ${name}${unit}c r${name}${unit}c chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h] mknod ${name}${unit}la c $chr $(($unit * 8 + 128)) \ root:operator mknod ${name}${unit}lc c $chr $(($unit * 8 + 130)) \ root:operator ln -f ${name}${unit}la r${name}${unit}la ln -f ${name}${unit}lc r${name}${unit}lc chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; wcd*) umask 2 ; unit=3D`expr $i : '...\(.*\)'` chr=3D69 case $unit in 0|1|2|3|4|5|6|7) mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator ln -f wcd${unit}a rwcd${unit}a ln -f wcd${unit}c rwcd${unit}c chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; wst*) umask 2 ; unit=3D`expr $i : '...\(.*\)'` chr=3D90 case $unit in 0|1|2|3) mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator chmod 640 rwst${unit} ;; esac umask 77 ;; iic*) unit=3D`expr $i : 'iic\(.*\)'` mknod iic$unit c 105 `unit2minor $unit` ;; smb*) unit=3D`expr $i : 'smb\(.*\)'` mknod smb$unit c 106 `unit2minor $unit` ;; pcfclock*) unit=3D`expr $i : 'pcfclock\(.*\)'` mknod pcfclock$unit c 140 `unit2minor $unit` ;; ppi*) unit=3D`expr $i : 'ppi\(.*\)'` mknod ppi$unit c 82 `unit2minor $unit` ;; pps*) unit=3D`expr $i : 'pps\(.*\)'` mknod pps$unit c 89 `unit2minor $unit` ;; usb) mknod usb$unit c 108 255 root:operator chmod 0660 usb$unit ;; usb*) umask 7 unit=3D`expr $i : 'usb\(.*\)'` mknod usb$unit c 108 `unit2minor $unit` root:operator umask 77 ;; uhid*) umask 7 unit=3D`expr $i : 'uhid\(.*\)'` mknod uhid$unit c 122 `unit2minor $unit` root:operator umask 77 ;; ums*) umask 7 unit=3D`expr $i : 'ums\(.*\)'` mknod ums$unit c 111 `unit2minor $unit` root:operator umask 77 ;; ulpt*) unit=3D`expr $i : 'ulpt\(.*\)'` minor=3D`unit2minor $unit` mknod ulpt$unit c 113 $minor minor=3D`unit2minor $(($unit + 64))` mknod unlpt$unit c 113 $minor # and the 'no prime' version ;; ugen*) umask 7 unit=3D`expr $i : 'ugen\([0-9][0-9]*\)'` endpoint=3D`expr $i : 'ugen.*\.\([0-9][0-9]*\)'` if [ -z "${unit}" ]; then echo $i - Invalid unit number fi if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15 mknod ugen$unit c 114 \ `unit2minor $(($unit * 16))` root:operator i=3D1 while [ $i -lt 16 ]; do mknod ugen$unit.$i c 114 \ `unit2minor $(($unit * 16 + $i))` root:operator i=3D$(($i + 1)) done else minor=3D`unit2minor $(($unit * 16 + $endpoint))` mknod ugen$unit.$endpoint c 114 $minor root:operator fi umask 77 ;; urio*) umask 7 unit=3D`expr $i : 'urio\(.*\)'` mknod urio$unit c 143 `unit2minor $unit` root:operator umask 77 ;; usio*) umask 7 unit=3D`expr $i : 'usio\(.*\)'` minor=3D$(($unit + 128)) minor=3D`unit2minor $(($unit + 128))` mknod usio$unit c 138 $minor uucp:dialer umask 77 ;; uscanner*) umask 7 unit=3D`expr $i : 'uscanner\(.*\)'` mknod uscanner$unit c 156 `unit2minor $unit` root:operator umask 77 ;; umodem*) umask 7 unit=3D`expr $i : 'umodem\(.*\)'` mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer umask 77 ;; lpt*) unit=3D`expr $i : 'lpt\(.*\)'` mknod lpt$unit c 16 `unit2minor $unit` mknod lpctl$unit c 16 `unit2minor $(($unit + 128))` ;; # Use this to create virtual consoles for syscons, pcvt or codrv # ttyv0-b # use as MAKEDEV vtyNN to create NN entries vty*) chr=3D12 units=3D`expr $i : 'vty\(.*\)'` i=3D0 while [ $i -lt $units ]; do mknod ttyv$(printf %01x $i) c $chr `unit2minor $i` i=3D$(($i + 1)) done ln -fs ttyv0 vga # XXX X still needs this pccons relic ;; nmdm*) units=3D`expr $i : 'nmdm\(.*\)'` chr=3D18 i=3D0 while [ $i -lt $units ]; do minor=3D`unit2minor $i` minor=3D$(($minor + $minor)) mknod nmdm${i}A c $chr $minor mknod nmdm${i}B c $chr $(($minor + 1)) i=3D$(($i + 1)) done ;; bpf*) nbpf=3D`expr $i : 'bpf\(.*\)$'` unit=3D0 while [ $unit -le $nbpf ]; do mknod bpf$unit c 23 `unit2minor $unit` unit=3D$(($unit + 1)) done ;; speaker) mknod speaker c 26 0 ;; cua?|cuaa?|cuaa??) umask 7 unit_low=3D`expr $i : 'cua.*\(.\)$'` case $i in cua?|cuaa?) unit_high=3D"" m_high=3D0 ;; cuaa??) unit_high=3D`expr $i : 'cuaa\(.\).$'` m_high=3D`ttyminor $unit_high` ;; esac unit=3D$unit_high$unit_low m=3D$(($m_high << 16 | `ttyminor $unit_low`)) mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer umask 77 ;; tty?|tty0?|ttyd?|ttyd??) unit_low=3D`expr $i : 'tty.*\(.\)$'` case $i in tty?|tty0?|ttyd?) unit_high=3D"" m_high=3D0 ;; ttyd??) unit_high=3D`expr $i : 'ttyd\(.\).$'` m_high=3D`ttyminor $unit_high` ;; esac unit=3D$unit_high$unit_low m=3D$(($m_high << 16 | `ttyminor $unit_low`)) mknod ttyd$unit c 28 $m mknod ttyid$unit c 28 $(($m | 32)) mknod ttyld$unit c 28 $(($m | 64)) ;; cuac?) umask 7 portlist=3D"0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v" major=3D48 card=3D`expr $i : 'cua.*\(.\)$'` for unit in $portlist do minor=3D`ttyminor $unit` minor=3D$(($card * 65536 + $minor)) name=3D$card$unit mknod cuac$name c $major $(($minor + 128)) uucp:dialer mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer done umask 77 ;; ttyc?) portlist=3D"0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v" major=3D48 card=3D`expr $i : 'tty.*\(.\)$'` for unit in $portlist do minor=3D`ttyminor $unit` minor=3D$(($card * 65536 + $minor)) name=3D$card$unit mknod ttyc$name c $major $minor mknod ttyic$name c $major $(($minor + 32)) mknod ttylc$name c $major $(($minor + 64)) done ;; # RISCom8 'rc' driver entries cuam?) umask 7 unit=3D`expr $i : 'cua.*\(.\)$'` m=3D`ttyminor $unit` mknod cuam$unit c 63 $(($m + 128)) uucp:dialer umask 77 ;; ttym?) unit=3D`expr $i : 'tty.*\(.\)$'` m=3D`ttyminor $unit` mknod ttym$unit c 63 $m ;; # Specialix SI/XIO. # Note: these are 'base 1' to match the numbers on the panels, and to match # the manual that comes with the system. ttyA*) major=3D68 nports=3D`expr $i : 'ttyA\(.*\)$'` port=3D1 while [ $port -le $nports ]; do minor=3D$(($port - 1)) name=3D$(printf %02d $port) mknod ttyA$name c $major $minor mknod ttyiA$name c $major $(($minor + 65536)) mknod ttylA$name c $major $(($minor + 131072)) port=3D$(($port + 1)) done # For the user-mode control program, 'sicontrol' mknod si_control c 68 262144 ;; cuaA*) umask 7 major=3D68 nports=3D`expr $i : 'cuaA\(.*\)$'` port=3D1 while [ $port -le $nports ]; do minor=3D$(($port - 1)) name=3D$(printf %02d $port) mknod cuaA$name c $major $(($minor + 128)) uucp:dialer mknod cuaiA$name c $major $(($minor + 128 + 65536)) \ uucp:dialer mknod cualA$name c $major $(($minor + 128 + 131072)) \ uucp:dialer port=3D$(($port + 1)) done umask 77 ;; # Alpha AS8[24]00 (TurboLaser) console. zs?) unit=3D`expr $i : 'zs.*\(.\)$'` m=3D`ttyminor $unit` mknod zs$unit c 135 $m ;; # Digiboard PC/?? 16 port card. # The current scheme of minor numbering is: # # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5} # # CARD bitfield in future versions may be extended to 3 bits. # # See dgb(4) # ttyD?) portlist=3D"0 1 2 3 4 5 6 7 8 9 a b c d e f" major=3D58 card=3D`expr $i : 'tty.*\(.\)$'` for unit in $portlist do minor=3D`ttyminor $unit` minor=3D$(($card * 65536 + $minor)) name=3D$card$unit mknod ttyD$name c $major $minor mknod ttyiD$name c $major $(($minor + 32)) mknod ttylD$name c $major $(($minor + 64)) done ;; cuaD?) umask 7 portlist=3D"0 1 2 3 4 5 6 7 8 9 a b c d e f" major=3D58 card=3D`expr $i : 'cua.*\(.\)$'` for unit in $portlist do minor=3D`ttyminor $unit` minor=3D$(($card * 65536 + $minor)) name=3D$card$unit mknod cuaD$name c $major $(($minor + 128)) uucp:dialer mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer done umask 77 ;; # Stallion multi serial cards (stl and stli drivers) #=20 # These drivers reserve 64 minor devices per board, even if the board # supports only 4 devices. We default to creating only 8 of the 64 devices # to keep /dev from getting too large (which =3D> slow). The last part of = the # arg is the board number to create ports for. So: # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE* # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE* # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE* # etc # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the=20 # definition of "maxport" below to get nodes for the full 32 or 64=20 # ports per card. # # Note that the mapping of minor device numbers (with the hole between # 32-64k) is a bit odd to keep compatibility with ttyd? for # lock/initial devices. =20 # Minor device field for the ports is # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-l= sbs{5} # for the mem device is # 0x1000000 + card # (For stl, there is only 1 mem device per system; for stli, one per board) ttyE*) stallion 72 E `expr $i : 'tty.*\(.\)$'` 0 ;; cuaE*) stallion 72 E `expr $i : 'cua.*\(.\)$'` 1 ;; stl*) card=3D`expr $i : 'stl\(.\)$'` stallion 72 E $card 0 stallion 72 E $card 1 ;; ttyF*) stallion 75 F `expr $i : 'tty.*\(.\)$'` 0 ;; cuaF*) stallion 75 F `expr $i : 'cua.*\(.\)$'` 1 ;; stli*) card=3D`expr $i : 'stl\(.\)$'` stallion 75 F $card 0 stallion 75 F $card 1 ;; ttyM*) portlist=3D"0 1 2 3 4 5 6 7 8 9 a b c d e f" modulelist=3D"a b c d" major=3D101 card=3D`expr $i : 'tty.*\(.\)$'` for unit in $modulelist do moduleminor=3D`ttyminor $unit` moduleminor=3D$(($moduleminor % 10 * 16)) modulename=3D$unit for unit in $portlist do minor=3D`ttyminor $unit` minor=3D$(($card * 65536 + $minor + $moduleminor)) name=3D$card$modulename$unit rm -f tty*M$name mknod ttyM$name c $major $minor mknod ttyiM$name c $major $(($minor + 64)) mknod ttylM$name c $major $(($minor + 128)) done done ;; cuaM?) umask 7 portlist=3D"0 1 2 3 4 5 6 7 8 9 a b c d e f" modulelist=3D"a b c d" major=3D101 card=3D`expr $i : 'cua.*\(.\)$'` for unit in $modulelist do moduleminor=3D`ttyminor $unit` moduleminor=3D$(($moduleminor % 10 * 16)) modulename=3D$unit for unit in $portlist do minor=3D`ttyminor $unit` minor=3D$(($card * 65536 + $minor + $moduleminor)) name=3D$card$modulename$unit rm -f cua*M$name mknod cuaM$name c $major $(($minor + 262144)) \ uucp:dialer mknod cuaiM$name c $major $(($minor + 64 + 262144)) \ uucp:dialer mknod cualM$name c $major $(($minor + 128 + 262144)) \ uucp:dialer done done umask 77 ;; ttyR?) major=3D81 BOARD=3D1; Rnum=3D0 MINOR=3D$(($BOARD * 65536)) controllers=3D$( dmesg | while read first rest; do case "$first" in RocketPort[0-4]) echo "$first" ;; esac done ) rm -f ttyR* ttyiR* ttylR* for i in $controllers; do ndevices=3D$( dmesg | while read first bar ports rest; do case "$first" in $i*) echo "$ports" ;; esac done ) echo -n "Creating $ndevices devices for $i: " dev=3D0 while [ $dev -lt $ndevices ]; do mknod ttyR$Rnum c $major $MINOR mknod ttyiR$Rnum c $major $(($MINOR + 32)) mknod ttylR$Rnum c $major $(($MINOR + 64)) Rnum=3D$(($Rnum + 1)) MINOR=3D$(($MINOR + 1)) dev=3D$(($dev + 1)) done BOARD=3D$(($BOARD + 1)) MINOR=3D$(($BOARD * 65536)) echo " " done ;; cuaR?) major=3D81 BOARD=3D1; Rnum=3D0 MINOR=3D$(($BOARD * 65536)) controllers=3D$( dmesg | while read first rest; do case "$first" in RocketPort[0-4]) echo "$first" ;; esac done ) rm -f cuaR* cuaiR* cualR* for i in $controllers; do ndevices=3D$( dmesg | while read first bar ports rest; do case "$first" in $i*) echo "$ports" ;; esac done ) echo -n "Creating $ndevices devices for $i: " dev=3D0 while [ $dev -lt $ndevices ]; do mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \ uucp:dialer mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \ uucp:dialer Rnum=3D$(($Rnum + 1)) MINOR=3D$(($MINOR + 1)) dev=3D$(($dev + 1)) done BOARD=3D$(($BOARD + 1)) MINOR=3D$(($BOARD * 65536)) echo " " done ;; mse*) unit=3D`expr $i : 'mse\(.*\)'` chr=3D27 # non-blocking for X11 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))` ;; psm*) unit=3D`expr $i : 'psm\(.*\)'` chr=3D21 # non-blocking for X11 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))` ;; mouse*) name=3D`expr $i : 'mouse\(.*\)'` if [ ! -c $name ]; then $0 $name # make the appropriate device fi ln -fs $name mouse ;; pcaudio) mknod pcaudio c 24 0 mknod pcaudioctl c 24 128 ;; socksys) mknod socksys c 41 0 mknod spx c 41 1 ln -fs socksys nfsd chmod 666 socksys nfsd spx ;; snd*) # # changes from Linux voxware # minor Linux FreeBSD # 8 sequencer2 (aka music0) music0 # 17 patmgr0 sequencer1 # 33 patmgr1 sequencer2 # unit=3D`expr $i : 'snd\(.*\)'` chr=3D30 # XXX write this less verbosely, like std snd_security_hole=3D0 # XXX umask $snd_security_hole ln -fs mixer$unit mixer ln -fs sequencer$unit sequencer ln -fs dsp$unit dsp ln -fs audio$unit audio ln -fs dspW$unit dspW ln -fs music$unit music ln -fs pss$unit pss ln -fs dsp$unit.0 dsp$unit ln -fs audio$unit.0 audio$unit ln -fs dspW$unit.0 dspW$unit mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))` mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))` mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))` for chn in 0 1 2 3 do minor=3D$(($chn * 65536 + $unit * 16)) mknod dsp$unit.$chn c $chr $(($minor + 3)) mknod audio$unit.$chn c $chr $(($minor + 4)) mknod dspW$unit.$chn c $chr $(($minor + 5)) done mknod sndstat c $chr 6 # minor number 7 is unused mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))` mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))` # minor numbers 10-15 are unused umask 77 ;; vat) mknod vatio c 25 128 chmod 660 vatio ;; gsc*) unit=3D`expr $i : 'gsc\(.*\)'` mknod gsc${unit} c 47 `unit2minor $unit` mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))` mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))` mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))` chmod 666 gsc${unit}* ;; apm) mknod apm c 39 0 root:operator chmod 664 apm ;; apmctl) mknod apmctl c 39 8 root:operator chmod 660 apmctl ;; card*) unit=3D`expr $i : 'card\(.*\)'` chr=3D50 mknod card$unit c $chr `unit2minor $unit` chmod 644 card$unit ;; ttyx?|ttyy?|ttyz?) case $i in *0) unit=3D0;; *1) unit=3D1;; *2) unit=3D2;; *3) unit=3D3;; *4) unit=3D4;; *5) unit=3D5;; *6) unit=3D6;; *7) unit=3D7;; *8) unit=3D8;; *9) unit=3D9;; *a) unit=3D10;; *b) unit=3D11;; *c) unit=3D12;; *d) unit=3D13;; *e) unit=3D14;; *f) unit=3D15;; esac case $i in ttyy?) unit=3D$(($unit + 16));; ttyz?) unit=3D$(($unit + 32));; esac mknod $i c 42 $unit ;; cronyx) mknod cronyx c 42 63 ;; joy) mknod joy0 c 51 0 root:operator mknod joy1 c 51 1 root:operator chmod 640 joy0 joy1 ;; spigot) mknod spigot c 11 0 chmod 444 spigot ;; ctx?) unit=3D`expr $i : 'ctx\(.*\)'` mknod ctx$unit c 40 `unit2minor $unit` chmod 444 ctx$unit ;; meteor?) unit=3D`expr $i : 'meteor\(.*\)'` mknod meteor$unit c 67 `unit2minor $unit` chmod 444 meteor$unit ;; bktr?) unit=3D`expr $i : 'bktr\(.*\)'` mknod bktr$unit c 92 `unit2minor $unit` mknod tuner$unit c 92 `unit2minor $((16 + $unit))` mknod vbi$unit c 92 `unit2minor $((32 + $unit))` chmod 444 bktr$unit tuner$unit vbi$unit ;; tun*) ntun=3D`expr $i : 'tun\(.*\)$'` unit=3D0 while [ $unit -le $ntun ]; do mknod tun$unit c 52 `unit2minor $unit` unit=3D$(($unit + 1)) done ;; tap*) ntap=3D`expr $i : 'tap\(.*\)$'` unit=3D0 while [ $unit -le $ntap ]; do mknod tap$unit c 149 `unit2minor $unit` root:network unit=3D$(($unit + 1)) done ;; sysmouse) mknod sysmouse c 12 128 mknod consolectl c 12 255 ;; jogdial) mknod jogdial c 160 0 ;; snp?) unit=3D`expr $i : 'snp\(.*\)'` mknod snp$unit c 53 `unit2minor $unit` ;; # dufault@hda.com: If I do much more work on other A-D boards # then eventually we'll have a "ad" and "dio" interface and some of these # "labpcaio" ones will be gone. # labpcaio: D-A and A-D. # labpcdio: Digital in and Digital out. # labpc*) umask 7 case $i in labpcaio*) name=3Dlabpcaio unit=3D`expr $i : 'labpcaio\(.*\)'` all=3D"0 1 2 3 4 5 6 7" offset=3D0 ;; labpcdio*) name=3Dlabpcdio unit=3D`expr $i : 'labpcdio\(.*\)'` all=3D"0 1 2 3" offset=3D8 ;; *) die 3 "Don't know LabPC type $i" ;; esac if [ -z "${unit}" ]; then unit=3Dall fi case $unit in 0|1|2|3|4|5|6|7) mknod $name$unit c 66 $(($offset + $unit)) ;; all) for i in $all do mknod $name$i c 66 $(($offset + $i)) done ;; *) echo "No such LabPC unit: $unit" ;; esac umask 77 ;; perfmon) mknod perfmon c 2 32 root:kmem chmod 640 perfmon ;; ipl) mknod ipl c 79 0 mknod ipnat c 79 1 mknod ipstate c 79 2 mknod ipauth c 79 3 ;; kbd*) unit=3D`expr $i : 'kbd\(.*\)'` chr=3D112 mknod kbd$unit c $chr `unit2minor $unit` ;; i4b) mknod i4b c 60 0 ;; i4bctl) mknod i4bctl c 55 0 ;; i4brbch*) unit=3D`expr $i : 'i4brbch\(.*\)'` mknod i4brbch$unit c 57 `unit2minor $unit` ;; i4bteld*) offset=3D64 unit=3D`expr $i : 'i4bteld\(.*\)'` mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))` ;; i4btel*) unit=3D`expr $i : 'i4btel\(.*\)'` mknod i4btel$unit c 56 `unit2minor $unit` ;; i4btrc*) unit=3D`expr $i : 'i4btrc\(.*\)'` mknod i4btrc$unit c 59 `unit2minor $unit` ;; aac*) unit=3D`expr $i : 'aac\(.*\)'` mknod aac$unit c 150 `unit2minor $unit` ln -fs aac$unit afa$unit ln -fs aac$unit hpn$unit ;; mlx*) unit=3D`expr $i : 'mlx\(.*\)'` mknod mlx$unit c 130 `unit2minor $unit` ;; amr*) unit=3D`expr $i : 'amr\(.*\)'` mknod amr$unit c 132 `unit2minor $unit` ;; ciss*) unit=3D`expr $i : 'ciss\(.*\)'` mknod ciss$unit c 166 `unit2minor $unit` ;; agpgart) mknod agpgart c 148 0 ;; twe*) unit=3D`expr $i : 'twe\(.*\)'` mknod twe$unit c 146 `unit2minor $unit` ;; tw*) unit=3D`expr $i : 'tw\(.*\)'` mknod tw$unit c 19 `unit2minor $unit` root:operator ;; cfs*) unit=3D`expr $i : 'cfs\(.*\)'` mknod cfs$unit c 93 $unit root:operator ;; nsmb*) unit=3D`expr $i : 'nsmb\(.*\)'` mknod nsmb$unit c 144 $unit ;; local) umask 0 # XXX should be elsewhere sh MAKEDEV.local umask 77 ;; *) echo $i - no such device name ;; esac done --=-KgW4LamjuglIV3PXyeyT-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200208052000.g75K0LwO055618>