Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 21 May 2021 13:45:00 GMT
From:      Andriy Gapon <avg@FreeBSD.org>
To:        src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-branches@FreeBSD.org
Subject:   git: 4b9d54e2aeca - stable/12 - mpsutil: extend show adapter information, add NCQ control
Message-ID:  <202105211345.14LDj0vu018147@gitrepo.freebsd.org>

next in thread | raw e-mail | index | archive | help
The branch stable/12 has been updated by avg:

URL: https://cgit.FreeBSD.org/src/commit/?id=4b9d54e2aeca7435698bd37a2d99416acb23c9b5

commit 4b9d54e2aeca7435698bd37a2d99416acb23c9b5
Author:     Daniel Austin <freebsd-ports@dan.me.uk>
AuthorDate: 2021-05-07 11:41:53 +0000
Commit:     Andriy Gapon <avg@FreeBSD.org>
CommitDate: 2021-05-21 10:32:35 +0000

    mpsutil: extend show adapter information, add NCQ control
    
    'show adapter' now shows PCIe width and speed, IOC Speed, and the
    temperature of the controller.
    
    A new command, 'set ncq', is added.
    It enables or disables SATA NCQ in the NVRAM of the card.
    Its current setting is added to 'show adapter' as well.
    
    PR:             254841
    Relnotes:       perhaps
    
    (cherry picked from commit e2ea6942ab316d4cd5c2fef73ab28dc974b8dc51)
---
 usr.sbin/mpsutil/Makefile   |   2 +-
 usr.sbin/mpsutil/mps_set.c  | 129 ++++++++++++++++++++++++++++++++++++++++++++
 usr.sbin/mpsutil/mps_show.c |  34 ++++++++++++
 usr.sbin/mpsutil/mpsutil.8  |   8 ++-
 4 files changed, 171 insertions(+), 2 deletions(-)

diff --git a/usr.sbin/mpsutil/Makefile b/usr.sbin/mpsutil/Makefile
index dd99f5814565..0bc981366650 100644
--- a/usr.sbin/mpsutil/Makefile
+++ b/usr.sbin/mpsutil/Makefile
@@ -1,7 +1,7 @@
 # $FreeBSD$
 
 PROG=	mpsutil
-SRCS=	mps_cmd.c mps_debug.c mps_flash.c mps_show.c mps_slot.c mpsutil.c
+SRCS=	mps_cmd.c mps_debug.c mps_flash.c mps_set.c mps_show.c mps_slot.c mpsutil.c
 MAN=	mpsutil.8
 
 WARNS?= 3
diff --git a/usr.sbin/mpsutil/mps_set.c b/usr.sbin/mpsutil/mps_set.c
new file mode 100644
index 000000000000..91e4d23ab78d
--- /dev/null
+++ b/usr.sbin/mpsutil/mps_set.c
@@ -0,0 +1,129 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2021 Daniel Austin <freebsd-ports@dan.me.uk>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__RCSID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/errno.h>
+#include <err.h>
+#include <libutil.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include "mpsutil.h"
+
+static int set_ncq(int ac, char **av);
+
+MPS_TABLE(top, set);
+
+static int
+set_ncq(int ac, char **av)
+{
+	MPI2_CONFIG_PAGE_HEADER header;
+	MPI2_CONFIG_PAGE_IO_UNIT_1 *iounit1;
+	MPI2_CONFIG_REQUEST req;
+	MPI2_CONFIG_REPLY reply;
+	int error, fd;
+
+	bzero(&req, sizeof(req));
+	bzero(&header, sizeof(header));
+	bzero(&reply, sizeof(reply));
+
+	fd = mps_open(mps_unit);
+	if (fd < 0) {
+		error = errno;
+		warn("mps_open");
+		return (error);
+	}
+
+	error = mps_read_config_page_header(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0,
+		&header, NULL);
+	if (error) {
+			error = errno;
+			warn("Failed to get IOUNIT page 1 header");
+			return (error);
+	}
+
+	iounit1 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, NULL);
+	if (iounit1 == NULL) {
+		error = errno;
+		warn("Failed to get IOUNIT page 1 info");
+		return (error);
+	}
+
+	if (ac == 1) {
+		/* just show current setting */
+		printf("SATA Native Command Queueing is currently: %s\n",
+			((iounit1->Flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE) == 0) ?
+			"ENABLED" : "DISABLED");
+	} else if (ac == 2) {
+		if (!strcasecmp(av[1], "enable") || !strcmp(av[1], "1")) {
+			iounit1->Flags &= ~MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE;
+		} else if (!strcasecmp(av[1], "disable") || !strcmp(av[1], "0")) {
+			iounit1->Flags |= MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE;
+		} else {
+			free(iounit1);
+			error = EINVAL;
+			warn("set ncq: Only 'enable' and 'disable' allowed.");
+			return (EINVAL);
+		}
+		req.Function = MPI2_FUNCTION_CONFIG;
+		req.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+		req.ExtPageLength = 0;
+		req.ExtPageType = 0;
+		req.Header = header;
+		req.PageAddress = 0;
+		if (mps_pass_command(fd, &req, sizeof(req) - sizeof(req.PageBufferSGE), &reply, sizeof(reply),
+			NULL, 0, iounit1, sizeof(iounit1), 30) != 0) {
+				free(iounit1);
+				error = errno;
+				warn("Failed to update config page");
+		                return (error);
+		}
+		if (!IOC_STATUS_SUCCESS(reply.IOCStatus)) {
+			free(iounit1);
+			error = errno;
+			warn("%s", mps_ioc_status(reply.IOCStatus));
+			return (error);
+		}
+		printf("NCQ setting accepted.  It may not take effect until the controller is reset.\n");
+	} else {
+		free(iounit1);
+		errno = EINVAL;
+		warn("set ncq: too many arguments");
+		return (EINVAL);
+	}
+	free(iounit1);
+
+	close(fd);
+	return (0);
+}
+
+MPS_COMMAND(set, ncq, set_ncq, "[enable|disable]", "set SATA NCQ function")
+
diff --git a/usr.sbin/mpsutil/mps_show.c b/usr.sbin/mpsutil/mps_show.c
index 57aed20a7d60..814b22ab6f69 100644
--- a/usr.sbin/mpsutil/mps_show.c
+++ b/usr.sbin/mpsutil/mps_show.c
@@ -58,12 +58,18 @@ MPS_TABLE(top, show);
 static int
 show_adapter(int ac, char **av)
 {
+	const char* pcie_speed[] = { "2.5", "5.0", "8.0" };
+	const char* temp_units[] = { "", "F", "C" };
+	const char* ioc_speeds[] = { "", "Full", "Half", "Quarter", "Eighth" };
+
 	MPI2_CONFIG_PAGE_SASIOUNIT_0	*sas0;
 	MPI2_CONFIG_PAGE_SASIOUNIT_1	*sas1;
 	MPI2_SAS_IO_UNIT0_PHY_DATA	*phy0;
 	MPI2_SAS_IO_UNIT1_PHY_DATA	*phy1;
 	MPI2_CONFIG_PAGE_MAN_0 *man0;
 	MPI2_CONFIG_PAGE_BIOS_3 *bios3;
+	MPI2_CONFIG_PAGE_IO_UNIT_1 *iounit1;
+	MPI2_CONFIG_PAGE_IO_UNIT_7 *iounit7;
 	MPI2_IOC_FACTS_REPLY *facts;
 	U16 IOCStatus;
 	char *speed, *minspeed, *maxspeed, *isdisabled, *type;
@@ -125,6 +131,34 @@ show_adapter(int ac, char **av)
 	    ? "yes" : "no");
 	free(facts);
 
+	iounit1 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, NULL);
+	if (iounit1 == NULL) {
+		error = errno;
+		warn("Failed to get IOUNIT page 1 info");
+		return (error);
+	}
+	printf("         SATA NCQ: %s\n",
+		((iounit1->Flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE) == 0) ?
+		"ENABLED" : "DISABLED");
+	free(iounit1);
+
+	iounit7 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 7, 0, NULL);
+	if (iounit7 == NULL) {
+		error = errno;
+		warn("Failed to get IOUNIT page 7 info");
+		return (error);
+	}
+	printf(" PCIe Width/Speed: x%d (%s GB/sec)\n", iounit7->PCIeWidth,
+		pcie_speed[iounit7->PCIeSpeed]);
+	printf("        IOC Speed: %s\n", ioc_speeds[iounit7->IOCSpeed]);
+	printf("      Temperature: ");
+	if (iounit7->IOCTemperatureUnits == MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT)
+		printf("Unknown/Unsupported\n");
+	else
+		printf("%d %s\n", iounit7->IOCTemperature,
+			temp_units[iounit7->IOCTemperatureUnits]);
+	free(iounit7);
+
 	fd = mps_open(mps_unit);
 	if (fd < 0) {
 		error = errno;
diff --git a/usr.sbin/mpsutil/mpsutil.8 b/usr.sbin/mpsutil/mpsutil.8
index 1dd4f0509174..7bd6728d49de 100644
--- a/usr.sbin/mpsutil/mpsutil.8
+++ b/usr.sbin/mpsutil/mpsutil.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd March 25, 2021
+.Dd May 7, 2021
 .Dt MPSUTIL 8
 .Os
 .Sh NAME
@@ -62,6 +62,10 @@
 .Cm show iocfacts
 .Nm
 .Op Fl u Ar unit
+.Cm set ncq
+.Op Ar enable Ns | Ns Ar disable
+.Nm
+.Op Fl u Ar unit
 .Cm flash save
 .Op Ar firmware Ns | Ns Ar bios
 .Op Ar file
@@ -134,6 +138,8 @@ Dump raw config page in hex.
 .Pp
 Controller management commands include:
 .Bl -tag -width indent
+.It Cm set ncq Oo Ar enable Ns | Ns Ar disable Oc
+Enables or disables NCQ in the NVRAM of the card.
 .It Cm flash save Oo Ar firmware Ns | Ns Ar bios Oc Op Ar file
 Save the
 .Ar firmware



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202105211345.14LDj0vu018147>