Date: Fri, 27 Dec 2002 17:56:40 -0500 From: "tony" <tony@tntpro.com> To: "Brett Glass" <brett@lariat.org>, "Soeren Schmidt" <sos@spider.deepcore.dk> Cc: <hardware@FreeBSD.ORG>, <sos@FreeBSD.ORG> Subject: RE: More on Dell 600SC server Message-ID: <CNEFKDNEFDGFAHFOFONBMEIGDCAA.tony@tntpro.com> In-Reply-To: <4.3.2.7.2.20021226121054.00b23640@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
I would recommend setting one to master and one to slave... sometimes auto isn't auto and it just gets confused... which seems to be happening here... Can't hurt to try it that way -----Original Message----- From: owner-freebsd-hardware@FreeBSD.ORG [mailto:owner-freebsd-hardware@FreeBSD.ORG]On Behalf Of Brett Glass Sent: Thursday, December 26, 2002 2:15 PM To: Soeren Schmidt Cc: hardware@FreeBSD.ORG; sos@FreeBSD.ORG Subject: Re: More on Dell 600SC server At 11:49 AM 12/26/2002, Soeren Schmidt wrote: >dmesg ? I don't have all of it, but I do have a relevant excerpt. When you try to boot with two drives on the primary cable, you see the following: ... ad0: <WDC WD 200BB-18DEA0/05.03ED05> ATA-5 disk at ata0-master ad0: 19073 MB (39062500 sectors), 38752 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, BIOSDMA ad0: piomode=4 dmamode=2 udmamode-5 cblid=1 ad1: scuuess setting WDMA2 on generic chip Creating DISK ad1 ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. and then nothing. The machine hangs. With one drive on the cable, it's OK. Both drives are WD drives, jumpered to "auto." >what chipset is in there ? my guess is a newer ServerWorks >as they have a third interface onchip IIRC. Yes, I believe it's a ServerWorks chipset. >If they are that inexpensive ship me one and I'll make it work :) They start at $600 US, which is inexpensive for a server with ECC RAM, etc. Trouble is, we have to put this one into service. Do you have a way of getting a look at one? Or if I gave you an account on one, could you snoop around from a distance? --Brett To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CNEFKDNEFDGFAHFOFONBMEIGDCAA.tony>