Date: Thu, 23 Feb 2012 07:41:25 +0100 From: Attila Nagy <bra@fsn.hu> To: pyunyh@gmail.com Cc: stable@freebsd.org Subject: Re: Fatal trap 19, Stopped at bge_init_locked+ and bge booting problems Message-ID: <4F45DF95.9050309@fsn.hu> In-Reply-To: <20120223204401.GB13815@michelle.cdnetworks.com> References: <4F449E0B.2040909@fsn.hu> <20120223041516.GI6861@michelle.cdnetworks.com> <4F44FF2A.9050505@fsn.hu> <20120223204401.GB13815@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 02/23/12 21:44, YongHyeon PYUN wrote: > I have to ask more information for the controller to Broadcom. > Not sure whether I can get some hint at this moment though. :-( Is there anything I can do? I ask this because I have to give back this server very soon. > > Given that you also have USB related errors, could you completely > remove bge(4) in your kernel and see whether it can successfully > boot up? > I think you can add the following entries to /boot/device.hints > without rebuilding kernel. > > hint.bge.0.disabled="1" > hint.bge.1.disabled="1" > hint.bge.2.disabled="1" > hint.bge.3.disabled="1" This does not help. Removing bge makes it stop here: da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C) panic: bootpc_init: no eligible interfaces cpuid = 0 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 panic() at panic+0x187 bootpc_init() at bootpc_init+0x1205 mi_startup() at mi_startup+0x77 btext() at btext+0x2c KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at kdb_enter+0x3b: movq $0,0x976972(%rip) db> Which is completely OK, because there are really no interfaces to boot from. Note that there is no NMI either (maybe because it would happen later in the initialization process). Sadly, I can't boot from disk, but I assume it would work.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F45DF95.9050309>