Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 28 Apr 2011 12:14:04 -0400
From:      Michael Proto <mike@jellydonut.org>
To:        freebsd-stable@freebsd.org
Subject:   Re: correct way to setup gmirror on 7.4?
Message-ID:  <BANLkTi=TAJavv2MGMhxTVOUmhSkJ_oUC9g@mail.gmail.com>
In-Reply-To: <E1QFTMy-000JA0-9I@dilbert.ingresso.co.uk>
References:  <BANLkTimAxZNrT63kDOPTN%2Bq1wOoQqf3Q5g@mail.gmail.com> <E1QFTMy-000JA0-9I@dilbert.ingresso.co.uk>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Apr 28, 2011 at 11:43 AM, Pete French <petefrench@ingresso.co.uk> w=
rote:
>> Correct. =A0The layering is not, in itself, the issue. =A0The issue is
>> that the loader or kernel or whatever reads the first sector of the
>> disk, finds a GPT so it then looks for the backup GPT in the last
>> physical sector of the disk and doesn't find it. =A0At this point,
>> gmirror is not loaded (or not noticed, since there's nothing in the
>> first sector of the disk to show it's a mirror). =A0Once gmirror is
>> loaded, then the GPT stops complaining as the first and last sectors
>> of the gmirrror provider have the GPT tables.
>
> Is not the problem here that you are trying to GPT label a gmirrored disc=
 ?
> If you instead gmirror two GPT partitions then the problem goes away
> doesnt it ? Thats how I set things up - use parititoning on the ohysical
> drives, and then put the mirroring into the partitions thus created.
> Works fine, and doesnt suffer from any of the afforementioned problems.
>
> -pete.
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>

Actually I was first creating 2 GPT partitions on each disk and then
creating a mirror on each of those partitions (2 partitions per disk,
2 mirrors). When doing that I ran into the secondary GPT block
displaying as "not found" during boot. As I mentioned, I didn't know
if that was a problem per-se, which is why I posted to the list to see
if there was a better way of mirroring partitions. From what I'm
gathering, I think I did things correctly actually.


-Proto



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTi=TAJavv2MGMhxTVOUmhSkJ_oUC9g>