Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Oct 2010 09:59:00 GMT
From:      Damian  <damkol@gmail.com>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   i386/151617: FreeBSD 8 panic on boot.
Message-ID:  <201010210959.o9L9x0Gu020611@www.freebsd.org>
Resent-Message-ID: <201010211000.o9LA0NbO035642@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         151617
>Category:       i386
>Synopsis:       FreeBSD 8 panic on boot.
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Oct 21 10:00:23 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator:     Damian
>Release:        FreeBSD 7.3
>Organization:
>Environment:
FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
>Description:
FreeBSD 7.3-RELEASE (livefs) works fine on my Compaq DL380 testbox.

FreeBSD 8.0-RELEASE, FreeBSD 8.1-RELEASE, FreeBSD 8.1-STABLE (201010),
FreeBSD 9.0-CURRENT (201010) panic on boot with:
panic: Couldn't find an APIC vector for IRQ 9

When i change APIC table from 'Full table APIC; to 'Disable' in bios,
then FreeBSD panic with the same reason, but IRQ 13.

ACPI/no ACPI nothing change.

Here is dmesg:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
    root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc12c7000.
Preloaded mfs_root "/boot/mfsroot" at 0xc12c7188.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc12c71cc.
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1258219877 Hz
CPU: Intel(R) Pentium(R) III CPU family      1266MHz (1258.22-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>

Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 512 KB, 8-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory  = 1610596352 (1535 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001425000 - 0x000000005e4abfff, 1560834048 bytes (381063 pages)
avail memory = 1560190976 (1487 MB)
Table 'FACP' at 0x5fffc040
Table 'APIC' at 0x5fffc100
APIC: Found table at 0x5fffc100
MP Configuration Table version 1.4 found at 0xc00f3012
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
SMP: Added CPU 3 (AP)
ACPI APIC Table: <COMPAQ 00000083>
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x94
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 3
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ACPI: RSDP @ 0x0xf4f70/0x0014 (v  0 COMPAQ)
ACPI: RSDT @ 0x0x5fffc000/0x0030 (v  1 COMPAQ P24      0x00000002   \M-R\^D 0x0000162E)
ACPI: FACP @ 0x0x5fffc040/0x0074 (v  1 COMPAQ P24      0x00000002   \M-R\^D 0x0000162E)
ACPI: DSDT @ 0x0x5fffc200/0x26E3 (v  1 COMPAQ     DSDT 0x00000001 MSFT 0x0100000B)
ACPI: FACS @ 0x0x5fffc0c0/0x0040
ACPI: APIC @ 0x0x5fffc100/0x0074 (v  1 COMPAQ 00000083 0x00000002      0x00000000)
ACPI: SPCR @ 0x0x5fffc180/0x0050 (v  1 COMPAQ SPCRRBSU 0x00000001   \M-R\^D 0x0000162E)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 2, Interrupt 16 at 0xfec01000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
cpu0 BSP:
     ID: 0x03000000   VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010400
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51)
npx0: INT 16 interface
acpi0: <COMPAQ P24> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc4c9c000 pa 0x1000
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00081166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 1
AcpiOsDerivePciId: \\_SB_.PCI0.CFG1.MEM0 -> bus 0 dev 0 func 2
AcpiOsDerivePciId: \\_SB_.PCI0.CFG2.MEM0 -> bus 0 dev 0 func 3
ACPI timer: 1/1 0/15 1/1 1/1 1/1 0/16777168 0/16777189 1/1 1/1 0/16777200 -> 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  15
  Validation          0   15   N     0  15
  After Disable       0  255   N     0  15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  15
  Validation          0  255   N     0  15
  After Disable       0  255   N     0  15
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1166, dev=0x0008, revid=0x23
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0008, revid=0x01
        domain=0, bus=0, slot=0, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0006, revid=0x01
        domain=0, bus=0, slot=0, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0142, statreg=0x0200, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0006, revid=0x01
        domain=0, bus=0, slot=0, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0142, statreg=0x0200, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x0e11, dev=0xb178, revid=0x01
        domain=0, bus=0, slot=1, func=0
        class=01-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0157, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=3
        powerspec 2  supports D0 D1 D3  current D0
        MSI supports 2 messages, 64 bit
        map[10]: type Memory, range 64, base 0xf7ec0000, size 18, enabled
        map[18]: type I/O Port, range 32, base 0x2000, size  8, enabled
        map[1c]: type Prefetchable Memory, range 64, base 0xf5ef0000, size 14, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1229, revid=0x08
        domain=0, bus=0, slot=2, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf7eb0000, size 12, enabled
        map[14]: type I/O Port, range 32, base 0x2400, size  6, enabled
        map[18]: type Memory, range 32, base 0xf7d00000, size 20, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1229, revid=0x08
        domain=0, bus=0, slot=4, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
        intpin=a, irq=7
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf7cf0000, size 12, enabled
        map[14]: type I/O Port, range 32, base 0x2440, size  6, enabled
        map[18]: type Memory, range 32, base 0xf7b00000, size 20, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 20
found-> vendor=0x1002, dev=0x4752, revid=0x27
        domain=0, bus=0, slot=5, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xf6000000, size 24, enabled
        map[14]: type I/O Port, range 32, base 0x2800, size  8, enabled
        map[18]: type Memory, range 32, base 0xf5ff0000, size 12, enabled
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
        domain=0, bus=0, slot=6, func=0
        class=08-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        map[10]: type I/O Port, range 32, base 0x1800, size  8, enabled
        map[14]: type Memory, range 32, base 0xf5fe0000, size  8, enabled
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 21
found-> vendor=0x1166, dev=0x0200, revid=0x51
        domain=0, bus=0, slot=15, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[90]: type I/O Port, range 32, base 0, size  4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
        domain=0, bus=0, slot=15, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=1
        cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type I/O Port, range 32, base 0x2c00, size  4, enabled
found-> vendor=0x1166, dev=0x0220, revid=0x04
        domain=0, bus=0, slot=15, func=2
        class=0c-03-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0157, statreg=0x0280, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
        intpin=a, irq=11
        map[10]: type Memory, range 32, base 0xf5fd0000, size 12, enabled
pcib0: matched entry for 0.15.INTA
pcib0: slot 15 INTA hardwired to IRQ 22
ciss0: <Compaq Smart Array 5i> port 0x2000-0x20ff mem 0xf7ec0000-0xf7efffff,0xf5ef0000-0xf5ef3fff irq 16 at device 1.0 on pci0
ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xf7ec0000
ioapic1: routing intpin 0 (PCI IRQ 16) to vector 49
ciss0: [MPSAFE]
ciss0: [ITHREAD]
ciss0: using 256 of 1024 available commands
ciss0:   firmware 2.62
ciss0:   2 SCSI channels
ciss0:   signature 'CISS'
ciss0:   valence 1
ciss0:   supported I/O methods 0x6<simple,performant>
ciss0:   active I/O method 0x3<simple>
ciss0:   4G page base 0x00000000
ciss0:   interrupt coalesce delay 1000us
ciss0:   interrupt coalesce count 16
ciss0:   max outstanding commands 1024
ciss0:   bus types 0x2<ultra3>
ciss0:   server name ''
ciss0:   heartbeat 0x3000003f
ciss0: 6 physical devices
ciss0: 5 logical drives
ciss0: logical drive (b0t0): RAID 0, 16896MB online
ciss0: logical drive (b0t1): RAID 0, 16896MB online
ciss0: logical drive (b0t2): RAID 0, 139776MB online
ciss0: logical drive (b0t3): RAID 0, 139776MB online
ciss0: logical drive (b0t4): RAID 0, 34304MB online
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2400-0x243f mem 0xf7eb0000-0xf7eb0fff,0xf7d00000-0xf7dfffff irq 18 at device 2.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7eb0000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:08:02:e6:7a:1d
ioapic1: routing intpin 2 (PCI IRQ 18) to vector 50
fxp0: [MPSAFE]
fxp0: [ITHREAD]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x2440-0x247f mem 0xf7cf0000-0xf7cf0fff,0xf7b00000-0xf7bfffff irq 20 at device 4.0 on pci0
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7cf0000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 1229 0e11 b134 0008
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:08:02:e6:7a:1c
ioapic1: routing intpin 4 (PCI IRQ 20) to vector 51
fxp1: [MPSAFE]
fxp1: [ITHREAD]
vgapci0: <VGA-compatible display> port 0x2800-0x28ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 5.0 on pci0
pci0: <base peripheral> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2c00-0x2c0f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2c00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xf5fd0000-0xf5fd0fff irq 22 at device 15.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf5fd0000
ohci0: (New OHCI DeviceId=0x02201166)
ioapic1: routing intpin 6 (PCI IRQ 22) to vector 54
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci7: <ACPI PCI bus> on pcib2
pci7: domain=0, physical bus=7
found-> vendor=0x0e11, dev=0xa0f7, revid=0x12
        domain=0, bus=7, slot=7, func=0
        class=08-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=15
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 32, base 0xf7ff0000, size  8, enabled
pcib2: matched entry for 7.7.INTA
pcib2: slot 7 INTA hardwired to IRQ 23
pci7: <base peripheral, PCI hot-plug controller> at device 7.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: Failed Intstat Reg Test
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4001 0x4001 0x4001 0x4001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 101661 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66222107 hz
Timecounter "TSC" frequency 1258219877 Hz quality 800
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0e2208c
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ROSB4 chip
acd0: <CD-224E/A.8D> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
(probe0:ciss0:0:0:0): Down reving Protocol Version from 2 to 0?
(probe1:ciss0:0:1:0): Down reving Protocol Version from 2 to 0?
(probe2:ciss0:0:2:0): Down reving Protocol Version from 2 to 0?
(probe3:ciss0:0:3:0): Down reving Protocol Version from 2 to 0?
(probe4:ciss0:0:4:0): Down reving Protocol Version from 2 to 0?
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: Command Queueing Enabled
da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C)
da1 at ciss0 bus 0 target 1 lun 0
da1: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
da1: 135.168MB/s transfers
da1: Command Queueing Enabled
da1: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C)
da2 at ciss0 bus 0 target 2 lun 0
da2: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
da2: 135.168MB/s transfers
da2: Command Queueing Enabled
da2: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C)
da3 at ciss0 bus 0 target 3 lun 0
da3: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
da3: 135.168MB/s transfers
da3: Command Queueing Enabled
da3: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C)
da4 at ciss0 bus 0 target 4 lun 0
da4: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
da4: 135.168MB/s transfers
da4: Command Queueing Enabled
da4: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
pass0: 135.168MB/s transfers
pass0: Command Queueing Enabled
pass1 at ciss0 bus 0 target 1 lun 0
pass1: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
pass1: 135.168MB/s transfers
pass1: Command Queueing Enabled
pass2 at ciss0 bus 0 target 2 lun 0
pass2: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
pass2: 135.168MB/s transfers
pass2: Command Queueing Enabled
pass3 at ciss0 bus 0 target 3 lun 0
pass3: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
pass3: 135.168MB/s transfers
pass3: Command Queueing Enabled
pass4 at ciss0 bus 0 target 4 lun 0
pass4: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-0 device
pass4: 135.168MB/s transfers
pass4: Command Queueing Enabled
ATA PseudoRAID loaded
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk da4
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall

>How-To-Repeat:
Panic on boot everytime with FreeBSD 8 and 9.
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010210959.o9L9x0Gu020611>