Date: Wed, 10 Jan 2018 14:47:44 -0500 From: Mike Tancsa <mike@sentex.net> To: freebsd-questions <freebsd-questions@freebsd.org> Subject: mmcsd / sdhci_pci errors Message-ID: <fc627963-cce8-ddd6-4bea-648a0f44611d@sentex.net>
next in thread | raw e-mail | index | archive | help
On a couple of PCEngines APU2 and APU3 boxes, I have been having errors on the SD cards when I try to write to them after about a day. If I reboot, mount the sd card rw, make some changes and then remount the card ro, all is fine. Then the next day if I try and do it again, I get errors of this sort below. Is that a bad card ? Bug ? sdhci_pci0-slot0: =========================================== g_vfs_done():mmcsd0s1a[READ(offset=994430976, length=4096)]error = 5 sdhci_pci0-slot0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x001e085f | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== g_vfs_done():mmcsd0s1a[READ(offset=1007689728, length=4096)]error = 5 sdhci_pci0-slot0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x001f37d7 | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00608000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== sdhci_pci0-slot0: g_vfs_done():Got data interrupt 0x00600000, but there is no active command. sdhci_pci0-slot0: mmcsd0s1a[READ(offset=1047465984, length=4096)]error = 5 ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x001f37d7 | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000006 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x001f9cff | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00608000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: Error indicated: 1 Timeout ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== sdhci_pci0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x001f9cff | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== g_vfs_done():mmcsd0s1a[READ(offset=1060724736, length=4096)]error = 5 sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Error indicated: 1 Timeout Argument: 0x00200227 | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== g_vfs_done():mmcsd0s1a[READ(offset=1073983488, length=4096)]error = 5 sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: Error indicated: 1 Timeout ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x0020674f | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== g_vfs_done():mmcsd0s1a[READ(offset=1087242240, length=4096)]error = 5 sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x0020cc77 | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Error indicated: 1 Timeout Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== g_vfs_done():mmcsd0s1a[READ(offset=1100500992, length=4096)]error = 5 sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. sdhci_pci0-slot0: Error indicated: 1 Timeout ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x0021319f | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00608000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== sdhci_pci0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x050bd000 | Version: 0x00001001 sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_pci0-slot0: Argument: 0x0021319f | Trn mode: 0x00000037 sdhci_pci0-slot0: Present: 0x01ef0000 | Host ctl: 0x00000007 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 sdhci_pci0-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00f3 sdhci_pci0-slot0: AC12 err: 0x00000001 | Host ctl2:0x00000080 sdhci_pci0-slot0: Caps: 0x21fe32b2 | Caps2: 0x00000070 sdhci_pci0-slot0: Max curr: 0x00c80064 | ADMA err: 0x00000000 sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x000000ff sdhci_pci0-slot0: =========================================== -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?fc627963-cce8-ddd6-4bea-648a0f44611d>