Date: Thu, 16 Mar 2000 20:14:07 -0500 From: Cy Ardoin <ardoin@mindspring.com> To: Soren Schmidt <sos@freebsd.dk> Cc: freebsd-bugs@FreeBSD.ORG Subject: Re: HPT 366 on ABIT BE6 Message-ID: <38D186DF.8C0C9AFC@mindspring.com> References: <200003161024.LAA96024@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------0714C87F3E578ECD65042446 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sure. HPT bios is 1.21 Verbose output attached [verbose.txt] Kernel config attached. [CY] (I tried both w/wo DMA) Thanks Cy Soren Schmidt wrote: > It seems Cy Ardoin wrote: > > ABIT BE6 (bios version "pl" latest from ABIT), 500MHz Pentium III, 128MB > > > > Using FreeBSD 4.0 (taken from cvsup4 on Tuesday 3/14/00) > > The ata driver locks up when I access an ATA/66 drive > > > > # fdisk /dev/ad6s1f > > READ: command timeout resetting > > ata3: resetting drives . . . > > > > The system hangs at this point and must be power cycled. > > The ad6 drive is a WD136AA. > > but it also happens on the newer WD153BA drive. > > Could you mail me your config file and the output from a verbose > boot please, without those I dont have any info to go by... > > -Søren --------------0714C87F3E578ECD65042446 Content-Type: text/plain; charset=us-ascii; name="verbose.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="verbose.txt" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #1: Wed Mar 15 14:31:08 EST 2000 root@blackwater.mindspring.com:/usr/src/sys/compile/CY Calibrating clock(s) ... TSC clock: 501206144 Hz, i8254 clock: 1193348 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003d7000 - 0x07ff7fff, 130158592 bytes (31777 pages) avail memory = 126259200 (123300K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faf90 bios32: Entry = 0xfb410 (c00fb410) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb440 pnpbios: Found PnP BIOS data at 0xc00fc010 pnpbios: Entry = f0000:c038 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc03be000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e8000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 map[20]: type 1, range 32, base 0000c000, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00005000, size 4 found-> vendor=0x8086, dev=0x1229, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base f1100000, size 12 map[14]: type 1, range 32, base 0000c400, size 5 map[18]: type 1, range 32, base f1000000, size 20 found-> vendor=0x1036, dev=0x0000, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000c800, size 4 found-> vendor=0x1103, dev=0x0004, revid=0x01 class=01-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000cc00, size 3 map[14]: type 1, range 32, base 0000d000, size 2 map[20]: type 1, range 32, base 0000d400, size 8 found-> vendor=0x1103, dev=0x0004, revid=0x01 class=01-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base 0000d800, size 3 map[14]: type 1, range 32, base 0000dc00, size 2 map[20]: type 1, range 32, base 0000e000, size 8 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x10de, dev=0x0101, revid=0x10 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base ec000000, size 24 map[14]: type 1, range 32, base e0000000, size 27 pci1: <PCI bus> on pcib1 pci1: <NVidia GeForce DDR graphics accelerator> (vendor=0x10de, dev=0x0101) at 0.0 irq 10 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=01 status0=00 status1=ff ata1: mask=01 status0=00 status1=ff ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 10 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xc400-0xc41f mem 0xf1000000-0xf10fffff,0xf1100000-0xf1100fff irq 10 at device 9.0 on pci0 fxp0: Ethernet address 00:a0:c9:32:3c:4f fxp0: supplying EUI64: 00:a0:c9:ff:fe:32:3c:4f bpf: fxp0 attached pci0: <unknown card> (vendor=0x1036, dev=0x0000) at 11.0 irq 11 atapci1: <HighPoint HPT366 ATA66 controller> port 0xd400-0xd4ff,0xd000-0xd003,0xcc00-0xcc07 irq 11 at device 19.0 on pci0 ata2: iobase=0xcc00 altiobase=0xd000 bmaddr=0xd400 ata2: mask=03 status0=50 status1=01 ata2: mask=03 status0=50 status1=01 ata2: devices = 0x3 ata2: at 0xcc00 on atapci1 atapci2: <HighPoint HPT366 ATA66 controller> port 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.1 on pci0 devclass_alloc_unit: ata2 already exists, using next available unit number ata3: iobase=0xd800 altiobase=0xdc00 bmaddr=0xe000 ata3: mask=03 status0=50 status1=01 ata3: mask=03 status0=50 status1=01 ata3: devices = 0x3 ata3: at 0xd800 on atapci2 using shared irq11. Trying Read_Port at 203 Trying Read_Port at 243 CTL0031: start dependant CTL0031: adding irq mask 0x20 CTL0031: adding dma mask 0x2 CTL0031: adding dma mask 0x20 CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0xca0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: end dependant PNPffff: adding io range 0x100-0x3f8, size=0x1, align=0x8 CTL0021: start dependant CTL0021: adding io range 0x620-0x623, size=0x4, align=0x1 CTL0021: start dependant CTL0021: adding io range 0x620-0x683, size=0x4, align=0x20 CTL0021: end dependant CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1 CTL0051: adding io range 0x100-0x3f8, size=0x1, align=0x8 USR1001: adding irq mask 0x2b8 USR1001: start dependant USR1001: adding io range 0x110-0x117, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x170-0x177, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x210-0x217, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x270-0x277, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x2f0-0x2f7, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x370-0x377, size=0x8, align=0x1 USR1001: end dependant devclass_alloc_unit: ata0 already exists, using next available unit number devclass_alloc_unit: ata1 already exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x61 0x71 0x61 0x61 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x61 0x69 0x61 0x61 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard HP LaserJet 5P> HP ENHANCED PCL5,PJL ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached isa_probe_children: probing PnP devices unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 unknown1: <Reserved> at port 0x100 on isa0 unknown2: <WaveTable> at port 0x620-0x623 on isa0 unknown3: <Game> at port 0x200-0x207 on isa0 unknown4: <StereoEnhance> at port 0x108 on isa0 unknown5: <U.S. Robotics Inc., Sportster Winmodem 28.8> at port 0x110-0x117 irq 9 on isa0 BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 4008c840, tty 4003109a, net 4007149a bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached ata2-slave: identify retries exceeded ata3-slave: identify retries exceeded ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: <Maxtor 91366U4/RA530JN0> ATA-5 disk at ata0 as master ad0: 13029MB (26684784 sectors), 26473 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad0 Creating DISK wd0 ata2-master: success setting up UDMA4 mode on HPT366 chip ad4: <WDC WD153BA/16.13M16> ATA-4 disk at ata2 as master ad4: 14669MB (30043440 sectors), 29805 cyls, 16 heads, 63 S/T, 512 B/S ad4: 16 secs/int, 1 depth queue, UDMA66 ad4: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad4 Creating DISK wd4 ata3-master: success setting up UDMA4 mode on HPT366 chip ad6: <WDC WD136AA/80.10A80> ATA-4 disk at ata3 as master ad6: 12971MB (26564832 sectors), 26354 cyls, 16 heads, 63 S/T, 512 B/S ad6: 16 secs/int, 1 depth queue, UDMA66 ad6: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad6 Creating DISK wd6 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up WDMA2 mode on PIIX4 chip acd0: <KENWOOD CD-ROM UCR-412 V124K/1.00> CDROM drive at ata1 as master acd0: read 7812KB/s (7812KB/s), 512KB buffer, WDMA2 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s3a ad0s1: type 0xb, start 63, end = 4000184, size 4000122 : OK ad0s2: type 0x5, start 4000185, end = 12402179, size 8401995 : OK ad0s3: type 0xa5, start 12402180, end = 26683964, size 14281785 : OK ad0s5: type 0xb, start 4000248, end = 12402179, size 8401932 : OK WARNING: / was not properly dismounted start_init: trying /sbin/init fxp0: starting DAD for fe80:0001::02a0:c9ff:fe32:3c4f fxp0: DAD complete for fe80:0001::02a0:c9ff:fe32:3c4f - no duplicates found --------------0714C87F3E578ECD65042446 Content-Type: text/plain; charset=us-ascii; name="CY" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="CY" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU cpu I686_CPU ident CY maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Teckram DC-390(T)) device dpt # DPT Smartcache - See LINT for options! device isp # Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) device tx # SMC 9432TX (83c170 ``EPIC'') device vx # 3Com 3c590, 3c595 (``Vortex'') device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 device fe0 at isa? port 0x300 device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet --------------0714C87F3E578ECD65042446-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38D186DF.8C0C9AFC>