Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Jan 2004 13:24:07 -0000
From:      "Steven Hartland" <killing@multiplay.co.uk>
To:        "Bogdan TARU" <bgd@icomag.de>, <freebsd-hackers@freebsd.org>
Subject:   Re: 4.9 kernel panics on a poweredge 2650
Message-ID:  <058401c3e1b4$2e451cb0$7b07000a@steven>
References:  <20040123125040.GA42187@icomag.de>

next in thread | previous in thread | raw e-mail | index | archive | help
may be a silly question have ur booted into single user and force checked
the disk may be some sort of fs corruption?

    Steve / K
----- Original Message ----- 
From: "Bogdan TARU" <bgd@icomag.de>
To: <freebsd-hackers@freebsd.org>
Sent: 23 January 2004 12:50
Subject: 4.9 kernel panics on a poweredge 2650


>
>
> Hi hackers,
>
>  I am experiencing kernel panics on a poweredge 2650 each day around
>  3am (usually the machine comes up at 3:04am). The kernel panics are
>  reproductable by running: /etc/periodic/security/100.chksetuid (in
>  fact by runnning find on /usr with -perms). The problem lies
>  somewhere in /usr/ports. Deleting the /usr/ports tree doesn't solve
>  it, trying a cvs up of /usr/ports results in a crash again.
>
>  I googled around a lil' bit, and found:
>  http://lists.freebsd.org/pipermail/freebsd-hackers/2003-April/000192.html,
>  and also Terry's answer, but that addresses freebsd 4.7. But my box
>  is running 4.9-release, and the systems was cleanly installed with
>  4.9 from the very beginning, so not upgraded from 4.7 or any other
>  previous version.
>
>  The dmesg looks like:
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
>         The Regents of the University of California. All rights
> reserved.
> FreeBSD 4.9-RELEASE #1: Mon Nov 17 23:47:49 CET 2003
>     root@:/usr/src/sys/compile/saturn
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 1790761584 Hz
> CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1790.76-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HT
T,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 2147418112 (2097088K bytes)
> avail memory = 2088136704 (2039196K bytes)
> Preloaded elf kernel "kernel" at 0xc0312000.
> Warning: Pentium 4 CPU: PSE disabled
> Pentium Pro MTRR support enabled
> Using $PIR table, 9 entries at 0xc00fc430
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pci0: <unknown card> (vendor=0x1028, dev=0x000c) at 4.0 irq 11
> pci0: <unknown card> (vendor=0x1028, dev=0x0008) at 4.1 irq 10
> pci0: <unknown card> (vendor=0x1028, dev=0x000d) at 4.2 irq 7
> pci0: <ATI Mach64-GR graphics accelerator> at 14.0
> atapci0: <ServerWorks CSB5 ATA100 controller> port
> 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device
> 15.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <OHCI USB controller> at 15.2 irq 5
> isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on
> pci0
> isa0: <ISA bus> on isab0
> pcib1: <Host to PCI bridge> on motherboard
> pci1: <PCI bus> on pcib1
> pcib2: <Host to PCI bridge> on motherboard
> pci2: <PCI bus> on pcib2
> pcib3: <Host to PCI bridge> on motherboard
> pci3: <PCI bus> on pcib3
> bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
> 0xfcf10000-0xfcf1ffff irq 11 at device 6.0 on pci3
> bge0: Ethernet address: 00:06:5b:f6:48:38
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
> 0xfcf00000-0xfcf0ffff irq 10 at device 8.0 on pci3
> bge1: Ethernet address: 00:06:5b:f6:48:39
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
> 0xfcf00000-0xfcf0ffff irq 10 at device 8.0 on pci3
> bge1: Ethernet address: 00:06:5b:f6:48:39
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> pci4: <PCI bus> on pcib4
> pcib8: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on
> pci4
> pci5: <PCI bus> on pcib8
> pci5: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.0 irq 7
> pci5: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.1 irq 11
> aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 7 at device 8.1
> on pci4
> aac0: i960RX 100MHz, 118MB cache memory, optional battery present
> aac0: Kernel 2.7-1, Build 3170, S/N 5010d3
> aac0: Supported
> Options=75c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,NORECOND,SGMAP64>
> pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> pci6: <PCI bus> on pcib5
> pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> pci7: <PCI bus> on pcib6
> pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> pci8: <PCI bus> on pcib7
> orm0: <Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xec000-0xeffff on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> IP Filter: v3.4.31 initialized.  Default = pass all, Logging =
> disabled
> ata0-slave: ATAPI identify retries exceeded
> acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
> aacd0: <RAID 0/1> on aac0
> aacd0: 139997MB (286714368 sectors)
>
>
>  Any ideas?
>
>  Thank you,
>  bogdan
> _______________________________________________
> freebsd-hackers@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
>

================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. 

In the event of misdirection, illegible or incomplete transmission please telephone (023) 8024 3137
or return the E.mail to postmaster@multiplay.co.uk.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?058401c3e1b4$2e451cb0$7b07000a>